Search the Community
Showing results for tags 'airplane'.
-
So I got a new LEGO room / ManCave for my son and I. Its large, about 20'x30', with open cathedral ceiling with exposed beams, ideal for hanging 9393 helicopter, 8480 space shuttle, 42025 cargo plane, etc.. I am looking for some solutions to do so - some requirements are - sturdy, can't risk any model falling; easily removable, by standing on a step stool should be able to reach the model and uncouple it from the hanger system for occasional swooshing and PF operation, and the hanging solution should be somewhat invisible. I am thinking about using this part , in trans-clear, as part of the support structure under the models, and then using colorless nylon rope to loop over the exposed beams. Perhaps s-hooks or carabiner-hooks can be used to attach the beams to the rope. Wondering if anyone else has done something similar and their solution. I am not planning to operate the PF while the models are suspended, however, but could one day... -
Around 4 months ago I built alternative model of 42035 Mining Truck but I just found some spare time to take pictures, film and describe it. So, using only parts from one 42035 set (including spares) two models were created: single engine Airplane and Tug. In total I used 347 parts from original 364. Mostly long axles and connectors has left. AIRPLANE This one has been built first. First off when I saw tapered panels I thought – “they’ll fit perfectly as an airplane wings!”. So I had no doubts what kind of alternative I’d like to do. Alpha version was created in 3 evenings and didn’t differ that much from the final product but still many parts left, including 4 wheels. I thought that it’s too much waste of bricks and I have to think out something else, best if this “something” would fit existing model. And so, second model appeared - Airport Tug, but about it in a minute. Airplane consist of 208 elements. It has moving single piston engine and propeller at front. Movement comes from rear wheels which are made out of T16 entwined with a chain. Plane has also movable rear loading ramp and ruder. From visual site there are pair of landing lights and side exhaust. Cockpit and 4 windows for passengers were highlighted too. TUG As I mentioned earlier after building airplane lots of parts left and I’ve made second vehicle – tug. It consist of 139 parts and has 2 functions – driving and retracting rear tow bar with hitch. In this model you can detect 2 similarities to mining truck – front grill and steering system. As there were quite limited amount of bricks left, probably nothing better than this, which has been already made, was possible to create. As in original truck there is also HOG steering. Tow bar mounting point is exactly at the end of frame. To fold and unfold it there is T8 gearwheel placed just behind driving wheel. At its end there is a hitch for airplane front wheel that can moves freely in any direction. After hooking it up propeller doesn’t touch any part of tow bar. Thanks to short wheelbase and overall compact dimensions even with hooked up airplane, maneuverability is really good. Everything due to limited amount of bricks is outlined in shape of tug but whole construction is resistant for intensitive play. Unfortunately visual attractions and details almost doesn’t exist beside front grill, mentioned earlier, and headlights. Bearing in mind that there are only around 360 bricks to use I think that models are not that bad. Both of them had to go on compromise but more attention and parts I spent on airplane. VIDEO: INSTRUCTION: It is true that making instructions is not my strong point but this time due to fact that many of you has 42035 set, I decided to made a LDD model. You can download it along with automatically generated instruction by clicking: DOWNLOAD Before building note that LDD interpret "axles with stop" incorrectly, so it's sometimes impossible to place it like instruction suggest. Keep it in mind when building. Thanks -
Here I'd like to show you two airplanes that were already on display at the exhibitions Bricking Bavaria in Germany and Mondesee in Austria. Both planes were also available as official sets in large scale in 2001 and 2002 – I had now tried to construct them in minifigure size. Sopwith F.1 Camel Fokker Dr.I Hope you like them - please let me know in the comments :) Best Johannes
-
LOCATION : ERTAUQ - E03 Tags : Land vehicle, airplane, exploration RHAAAAA KRAAAAAAAAAAAAAAAAAAAAAAAAAAA WOUUUT POUT POUT POUT KRRRRRRRRRRRRRRRRRRRRRR RIIIIIIIIIIIIIIIIIiNNNNNNNNNNNNNNNNNNNGGGGGGG RRR RRR VRAAAAAAAAAAAAAAAPOOO !!! : We've planned a straight line, BC 122, haven't we ? : This bloody machine took a bend by itself !!! RHAAAAA KRAAAAAAAAAAAAAAAAAAAAAAAAAAA WOUUUT POUT POUT POUT : Sucky controls !!! : You're the controls BC 122, keep calm and try again ! : Gni ??? : Yak gara tekh ! Degamer vren bar treppanez pa ma jutos ! : Yap ! : What's the hell is this... thing ? : Hadvice, what is this funny creature saying ? Should your in-suit computer translate please ? : Errrr... yes yes, professor. : Ma jutos !!!!! Treppanez bez paz !! : WAUGH !!!!!! : Er... Seems that BC 122 is wrecking their family sugar beets field professor... the children are very angry and the... "father" beg BC 122 to stop... C&C welcome... Bonuses later
-
I'm wolf_grrr here. You can find me on lots of various places. Look for me me
-
I present my new MOC, MOD Mercedes Arocs SILENT EAGLE Flight Simulator. Model was built for a competition on LUGPol.pl (polish AFOL forum). It is a flight simulator that can sometimes be found in amusement parks or at various air shows. But it is not based on any particular model. The original chassis is extended by a few studs between the axles to accommodate an additional pump in the compressor and gear drive for a second pair of outriggers behind the rear axle. Behind the Arocs cabin I installed servo and Ir to a control model . Everything above the chassis is already my design. It is full motion flight simulation platform with 6 small pneumatic cylinders each individually connected to a switch. The simulator is manually controlled from the cab. It is powered from its own compressor, two small pumps, airtank and PF XL motor. Additionally simulator is equipped with a new narrow long cylinder to open the door. It also has LED imitating projector and white panel acting as a screen. Two independent pneumatic systems are there to support vehicle outriggers does not lose pressure while playing simulator . LEDs are also in front and rear lights and running automatically when motion model. Weight 3.9 kg Length 61 cm Width 17 cm Height 24 cm 2 x PF L motor propulsion 1 x PF servo steering 1 x PF L motor mechanical functions 1 x PF XL motor simulator compressor 3 x PF swiches 4 x PF Led 6 meters of pneumatic hoses Gallery http://www.brickshelf.com/cgi-bin/gallery.cgi?f=559347 Movie -
LOCATION : G04 - Fractor V Tags : Science, Airplane, Spaceship (micro), Land vehicle, Civilian building, Alien, Octan A shuttle is leaving the Axle heading to Fractor V Pr. Thaum : That will be some cool days off, Hadvice, you will be surprised... Fractor V is a nice planet Hadvice: Sure professor, sure... ***** On Fractor V, secret lair of Professor Thaum : Pr Thaum : What do you think about it, Hadvice, my Gotha IV looks great, isn't it !! Hadvice : It's ugly ! GZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZTSHHHHHHHHHHHH Pr Thaum : Well, let me see, put it bluntly... : errr... it's wonderfull Professor, but this is a... a plane ? Pr Thaum : Yes Hadvice, a plane, what else ? A german Gotha IV bomber from world war one ! Hadvice : World War one ? Pr Thaum : you're a tyke Hadvice !!! Oh ! Aglae !!! How do you do !! Your a good little girl... I was far away for too long. Hadvice : Hi Aglae... Pr Thaum : Ah ! This is Nestor GANT, our pilot... : Welcome professor, we are almost ready, just change the plane's load. Hadvice: Professor ! My godness ! these are heavy bombs ! Just under the hull ! It's terribly dangerous Pr Thaum : You're a bonehead Hadvice, the Gotha IV is a bomber, sure it has bombs ! But you can feel reassured... these "bombs" are not actually bombs... : Pffiuuuwwwww... Pr Thaum : These are just Sarin gaz tank... <boonk> : Here are the new load, Professor, with your 3 mixtures. : Indeed, Hadvice, when your power nap will be over, could you please wear your flying suit... **** Few minuts later Pr Thaum : OK, all seems to go well... Mechanics : The twin motors are OK professor, they seems frighteningly old... prehistoric, but they are still in function. Pr Thaum : Take care of my babies, Barney. I want them as much. Pr Thaum : OK cole, you can lift the pod, we're ready to hitch it up Hadvice : The gaz valve is OK professor. Pr Thaum : Just to set up the hoover and we're ready for the test. : Everybody is OK ? : Yes, I am ! : Let's go. Gentlemen start the engine ! <flon flon flon> <roll roll rol roll roll roll roll> : Hop, that's a nice takeoff... <VraaaoooonnnnnnWAAAAOOOOOONwaaaaaooooonnnnnnWAAAAAOOOON> : Make a path just over the crew Nestor, we have to say good bye. <vraaaaaAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA> : Youhouuuuuuuu ! Bye everybody, see you later ! Aglae, be a good little Snuffling : Grooo Grooo Grooo !!! **** Later, high in Fractor V atmosphere Pr Thaum : Hadvice, you can open the valve and release the gazes !! Hadvice: Done !! Pr Thaum : I'll start the hoover <SHHHHHLLLOOOOOOOOOOORRRRP> Pr Thaum : Yes !!! the pod is full !! It tooks only a few seconds and we have a good sample of frozen bugs and atmosphere right in it !!! Ready to study !! Pr Thaum : I like that plane !!! : However, it is very noisy.... C&C welcome, bonus pics later
-
Hello everyone I would like to introduce my model for the Bombardier C-Series (both the CS100 and the CS300) which is the newest narrow body plane being made by the Canadian giant Bombardier to take on Airbus and Boeing's duopoly on the medium sized aircraft market. My model for the CS100, the smaller of the two members of the family comes in the colours of Swiss Global Airline, which is the launch customer for the type. The aircraft features retractable landing gears and opening doors. It can seat 6 passengers. The tail is this way until I can justify ordering two 3x3 cross plates (15397) which I still have to do. DSC04420 by Maxim Pieuchot, on Flickr DSC04442 by Maxim Pieuchot, on Flickr DSC04437 by Maxim Pieuchot, on Flickr DSC04427 by Maxim Pieuchot, on Flickr My CS300 is 4 studs longer and comes in the colours of my custom airline Nova Airlines. The aircraft features the same retractable landing gear and door system. DSC04460 by Maxim Pieuchot, on Flickr DSC04467 by Maxim Pieuchot, on Flickr I hope you enjoy these two airplanes. My goal is too bring more details into the lego aviation world. I hope you find these creations achieve this. All comments are welcome :) Happy Building -Max
-
Hi guys, girls and kids :) I'm new on this forum and new to Lego Technic although i played a lot with lego bricks when child. Last week I bought my very firs Technic kit and chose the 9398 4x4 Crawler which has Power Functions and RC. After three days I ended the model and played with that 5 minutes than I made it apart to start something mine. I wanted an airplane, and I love bush planes, those with big tires that can land on every surface. As my kit contains off-road tires, that was a good start. :) And in two days and a lot of tries and retries I ended up with this. Here's the video link (don't know how to embed) It is inspired to the Piper Cub. I know, tires are to big and wings to small and maybe many other imperfections, but that's absolutely my first construction with no instructions, only fantasy and brain work. I succeeded in hiding everything inside: battery pack, IR receiver and motor. I'm very happy with the result, and maybe one of those next day I'll try to give it an engine for the wheels, although I'm reluctant to take it apart as I'm sure I'll not be able to remake it as now. I hope you like it. :) Bye K Every comment is welcome. Any suggestion to make fast instructions? Thank you
-
Hey! Check out my Lego Boeing 737-600! Working: aileron, rudder, elevator, control column RC: flaps, slats, spoilers, landing gear, thrust reverser Length: 110 cm Wingspan: 125 cm Height: 40 cm Weight: 2,8 kg Video here: -
Hi Eurobricks member Here is my entry for Eurobricks contest It’s a pullback airplane Functions: As all the pullback, when you moved back, the engine cheers up itself. When you left, wheels and the propeller turns The video: http://youtu.be/ERiFm_HnOOY
-
Hi, I would like to present my next C-MODEL model. This time it is made from 42025 (cargo plane) SAILPLANE GLIDER Designed completely computer-free method. Just building, un-building, rebuilding. It took me over the year. But I had few periods when I did not touch it for several months or many weeks. For now, there is only very few pictures, you can call it a teaser. Video showing details and functions, complete description, and many pictures will come soon. Features: COMPLETE FLIGHT CONTROLS -working ailerons (controlled by the stick in the cockpit) -working elevators (controlled by the stick in the cockpit) -working rudder (controlled by the working pedals in the cockpit) -working flaps (controlled by the lever in the cockpit) -fully retractable landing gear (1 central wheel) (controlled by the knob on the side) -fully open-able and close-able landing gear bay (controlled by the lever under the fuselage) -open-able canopy (controlled by the lever on the side under the wings) - correct T shape tail - only 7 studs wide fuselage! - only 2 studs thick wings! - winglets - tail wheel. - structurally sound and rigid, wings are somewhat flexible (but still very playable) but I guess it is only accurate: No motorized functions - I thought it would be odd to put motor into something that is by definition motor/engineless - (I know there are self propelled sailplanes, but this one is not it) It is totally full, very packed and dense MOC. It is not a simple build. It assumes the builder is experienced technicman/technicwoman. It is huge - see with 42055 as reference: I hope you like it. More to come "hopefully" soon. _________________ edit 2: Video: _________________ edit 1: Photos added: leftover parts: February 2017 state: ______________________________ I hope you like it. Thank you for your time seeing the pictures. -
Hello everyone. This is my last diorama and the bigger one I've ever made, work started last summer. I've spent about 5 months to build it (included all veichles, buildings etc.), in free time. there are about 25.000 pieces, I don't know exact number and I don't care. Diorama are based on 12 bases 48x48, 5 bases 32x32 and 1 base 16x32, approx 210x120 cm. I hope you enjoy it, please leave a comment and follow me on flickr, there are more pictures. Thank you very much to all and sorry for my bad english. Andrea, Kriminal, Italy.
-
My first plane was a success (for the most part). It had most of the functionality I wanted it to have, though it lacked in terms of looks. The wings were just the worst thing, and there was no flow to the body, which was full of illegal connections. So I want to fix those problems, but in a different plane. First was a Gulfstream Private jet, now I present to you the passenger airplane. Now the big thing on this jet will be the wings, because the Jet engines will be on the wing, unlike my last plane. Function list: -Ailerons -Elevators -Rudder, coupled with ailerons -Landing gear with suspension system -Opening doors -Airbrakes -Working jet engines (though this will be more than unlikely) Pictures: 1 wing with part of fuselage. Wing uses beams with axles rather than just axles. It can hold itself up. Elastic band suspension system on the landing gear mounts. 2 mini LA's. So that;s it. Update tomorrow. Hopefully, I can finish this by Tuesday, because Tuesday onward I can only build on weekends. Have a nice day! -
I've been working on this, today. Trying to come up with an interesting pusher plane design that has influences back to World War II. This first picture is from from where I was blocking in the hull of the design. This shows a bit more design work with the addition of a different windscreen as well as the support pylons for the wings to the man fuselage. I'm still thinking of whether or not to add wing tip pontoons. Feel free to add any comments you have for additions to this design.
-
"Life is like a hurricane, here in Duck Burg Race cars, lasers, aeroplanes, it's a duck blur Might solve a mystery, or rewrite history Duck Tales (woo oo)” I built the Sunchaser in the style of the 2017 Duck Tales reboot series which is currently on its 3rd season. This Sunchaser moc is comprised of approximately 1400 pieces, and has a wingspan of 64 studs, a length of 63 studs, and a height of 34 bricks. It is minifigure scale, and has seats for 8 in the cockpit deck, which is above the massive cargo bay that comes with a black sedan, further room for minifigures is found in the hidden lounge in the nose of the plane. The back end opens up giving access to the cargo bay and cockpit deck above. The black sedan is 14 studs long and sits 2 minifigures. Thanks for stopping by! I will keep you updated if it is a go ahead to be voted on Lego Ideas
-
I recently finished building a LEGO City/Minifig scale plane that offers more details than your usual airliner. I have submitted my creation on LEGO Ideas. See more pictures and vote for it here! My model also has its own display stand which can also be used to display the minifigs. This plane is built using brick-built solutions instead of relying too much on pre-fabricated plane pieces. This plane has quite a nice cabin on the inside and can accommodate many minifigures. To see pictures of the Economy AND Business class cabins, please see my LEGO IDEAS project page.
-
Hi! every one here. First, happy Thanks Giving! Second, is Jon Hall here? Or is any body know Jon Hall? I am one of his/her follower. Here are some of his/her works, there are really fantastic!
-
I just picked up the Boeing 787 Dreamliner (10177-1) and the Silver Champion (8458) and was wondering how I can go about adding my own livery to each of them? or if at all possible? Such as getting custom stickers created? is there a website or program that would be helpful in creating custom stickers for these sets? **UPDATE COMPARISON BETWEEN SILVER CHAMPION 8458 AND MCLAREN MP4/14, MERCEDES MGP W01, F1 CARS** LEGO F1 SILVER CHAMPION 8458 1999 MCLAREN MERCEDES F1 MP4/14 2010 MERCEDES-PETRONAS F1 MGP W01
-
OK, I'll play too. I am excited about any reason to build an aircraft, but these last couple of days have been rough. I have drafted four ideas (F-86, TA-183, Air Racer, and DH Mosquito), and I didn't like were any of them were going. Getting the nose right is so tricky. Or I am too picky. So, here is the fifth idea, and we will see what can happen with this. It's not very ambitious, but I'll be able to get it done in time. And it fits with what I like to do, mid sized, no PF, and packed full of features. Dual Rotors Front and Rear Collective control Retractable landing gear Opening side door Rear ramp Which It's not much to start, but I have drafted some of the mechanics off to the side. I'll update again tomorrow. I am stuck on colors right now. Yellow and red is overdone, and I do not want too much white, so I welcome votes. Top/Bottom Orange, DBG Lego City White, Blue, and Orange Orange and LBG vertical panels Orange and DBG vertical panels Red and White -
Hello all, I’m new and it’s been a while since I last purchased a LEGO set. I love airliners such as commercial ones, jets, any modern airplane really... I purchased the Boeing 787 Dreamliner (10177) however, this seems to be the only set that’s actually decently sized, and not a MOC. I’ve tried googling and all forums to see if I could find others but to no avail and MOCs of aircraft I do find, either have no instructions or very small/basic construction... so if anyone can show me the right place to find decent well made models instructions or even alternative builds ? It would be amazing,
-
.thumb.gif.ad7c8d88b264ee812194946c07404504.gif)
So, it's already been three days since the contest was announced, and I still haven't built anything yet... It's probably time to get started then! The Inspiration: The idea for my entry comes from the main model of set 8485 - a set I'm still yet to build despite owning most of the parts... The Goal: My plan for this build is basically a modern version of the above model, but with a plane replacing the helicopter, and including the following features: Movable ailerons and elevators Lifting, rolling, and pitching of the plane Full manual control - no remote control. (hopefully) Possibly something else... The First Prototype: Rather than spending an extra day building a working prototype, I decided to just quickly build the basic idea in LDD, as I know from experience that I rarely end up using anything from the first prototype... Anyway, that's all for now, I hope to have something functional built either tomorrow or the next day... -
Dan Journman is a world famous traveling freelance LEGO reporter, specialized in engineering and technology. If Eurobricks agrees, I will post here excerpts from Dan's travel stories. His accounts have typically 4 parts: A description of his experiences, historical background from local sources, technical details, and his personal final comments. Some years ago, Dan visited a distant small mining facility with innovative water powered generators. But that's another story. This topic is from an intermediate stop during his journey, at a small regional airport. Dan's Story The morning flight from the SW capital was uneventful. It lasted a while as it was on the edge of the range for our small airplane, but it was still rather pleasant. The old but well maintained and clean aircraft was an LTR-24, seating 25 passengers, 1 cabin and 2 flight deck crew members. The three-bladed propellers revealed that this particular airplane was a quite old version of the popular regional turboprop; though with upgraded avionics and FMC. The LTR-24 is the smallest of the LTR range that has included the LTR-32, LTR-40 and SLTR-44. Based on the real world Aerospatiale/Alenia ATR series, passengers board through a rear located door and cargo is loaded through the large cargo door in the front, behind flightdeck. The first thing I noticed when we landed was the size of the airport building. I was surprised to find that there were only two daily flights connecting with bigger towns, in addition to some local flights to nearby sites, including the mining town I was about to visit. As I had some time to spare before my next flight, I had the opportunity to talk with the airport manager who was very helpful in providing information and he even gave me some pictures taken by drone, showing a similar aircraft (LTR-24) parked at the apron. The manager explained me that the airport building was an ambitious attempt to establish a secondary regional hub in the NW territory, to serve the few small northernmost towns of the region. Pressure from local politicians and overoptimistic hopes for rapid development of the region dictated the construction of a relatively large terminal with 5 gates, including 2 air-bridges. The two-level building has the capacity to serve several simultaneous flights. However, by the time the terminal was inaugurated and for the years to come, the passenger volume remained low and the largest airplane ever connecting the city to the main NW hub was the humble LTR-24 with a twice-daily service frequency. Two or three smaller SWTL-16 based at the airport connect the nearby towns. The irony in the pictures is obvious; the air-bridges are out of service since the LTR-24 (as well as the smaller commuter planes) cannot use an air-bridge and passengers board from one of the 3 ground gates. In fact, only a fraction of the terminal facilities has ever been used. Local press has often cited the airport expansion as a scandal, perhaps not without a reason. Some technical details about the Terminal The airport terminal of this small hub has a departures hall with check-in kiosks and desks, baggage drop-off and ticketing services. In the secured area, the main hall (mostly empty space) has only a small cafe selling also some souvenirs. Passengers board the planes through two air-bridges or ground level gates. A dedicated hallway allows any gate to be used for arrivals as well. The arrivals hall has two baggage claim belts and a car rental desk. The footprint area of the terminal is 6912 square studs (0.44 square meters, 4.8 square feet) and the volume is approximately 138000 cubic studs (0.08 cubic meters, 2.8 cubic feet). Final Comment from Dan A typical waste of taxpayers money. Spend too much, build too big, leave things unfinished and ugly looking. Low quality construction with limited use and functionality. Photo 1 (from drone) Baggage loading and passengers boarding. Loaders are placing the baggage into the forward cargo hold. Photo 2 (from drone) Passengers exiting the terminal building through ground gate B2. We used the exact same gate. Photo 3 (from drone) Another view of the flight preparations. Notice the First Officer standing next to the number 1 engine while doing the pre-flight check. Photo 4 Upgraded flightdeck of the old LTR-24 commuter turboprop; photo taken from behind First Officer's seat.
-
Hello, here is a stop motion video I made using one of my airplane MOCs
-
Hi, all my friends here! I just posted a contribution on Lego Ideas. That's a cute and creative Lego jet- plane set. Check it out! If you like it, please support it on the official Lego Ideas website https://ideas.lego.com/projects/8f441604-87c1-4768-a5d7-cad0c014fb6a to help me make it real. For getting this set actually into the Lego market, I need to gather at least 10,000 supports. Thank you for your interest and support, and don't forget to share it to your friends!
