Jump to content

mic8per_

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    46

  • Joined

  • Last visited

 Content Type 

Everything posted by mic8per_

  1. mic8per_
    Time to revive this account I guess... I am now making a LEGO replica of a city bus Iveco Streetway 12M, with currently working drivetrain and steering with a very big angle. The doors are pneumatic, I am planning to put an air tank inside, also the front door and the rear ones will have seperated switches. The rear is not done at all. Same for the interior. I am not really happy with the current look of the lights, does anyone know how to make them smaller? All you can see bellow is a WIP of course. Photos of the real thing: https://seznam-autobusu.cz/en/vuz/111410
  2. mic8per_
    WIP It's my first time making a copy of a real model, and I think the start isn't that bad... The front will be probably reworked, I don't like how it looks now. It has two motors - for drivetrain and steering, another two will be on roof for each door. Some pics: Photos of the real bus: More progress soon.
  3. mic8per_
    Thanks. 1964 parts according to the 3d model. Low-entry urban 9m bus. They're just too short. I even had to adjust the position of the hub to meke them reach all motors. That was actually the goal.
  4. mic8per_
    After a half year of work I present you this bus.The goal was to make as functional bus as possible with least amount of motors.The result is fully RC bus with openable doors, propulsions and steering using only 3 motors. The steering angle is really good. Steered by Large angular motorPropulsion uses XL-motorDoors work smoothly & flawlessly. They are powered by L-motorPowered by C+ hub.Lots of interion & exerior details. Building and programming instructions for $9.99: https://rebrickable.com/mocs/MOC-100999 Video:
  5. mic8per_
    Glad you like it!
  6. mic8per_
    The concept was to try out how a simple wheeled vehicle would do on snow, the result was even better than expected :)
  7. mic8per_
    Skid steer off road vehicle. The PF elements are fully protected from snow, and it actually works on harder snow. Driven by two PF L-motors, one motor per side. As a power source can be used BuWizz or any other 4-port battery box (not in the parts list). Building instructions+parts list: https://reb.li/m/95837
  8. mic8per_
    You can buy instructions here: https://reb.li/m/94973
  9. mic8per_
    A trial truck with HOG steering, suspension and winch.The suspension and the steering is the same principle as the A-model's one but the chassis is two studs narrower.The winch has a knob on the side and it's easy to use, also it can hold the whole truck.No openable doors but the truck has full interior, and some detailing. 42122 Alternate.
  10. mic8per_
    Very nice! I like all the details!
  11. mic8per_
    A fast RC racing pickup, Driven by Buggy motor steered with PF M-motor.Powered by buwizz which is not in the parts list. Instructions and parts list: https://reb.li/m/91218
  12. mic8per_
    Cool! :)
  13. mic8per_
    No it's not so good idea. I have tried them: XL motors work ok, M motors are running at different speed and one of them has no friction at axle hole, so the axle doesn't holds there, and second one has extreme friction at axle hole, so its extremelly hard to insert axle there, L motors seem ok, but they are faster than original ones (maybe it's even advantage), SERVO is extremelly easy to disasemble, so I had to super glue it, because it was taking apart at every crash....
  14. mic8per_
    almost correct, the 4th axle is not reduced. I ran out of parts, and space (yes it is hard to fit al these functions to 42108 scale base.) Is it ok now?
  15. mic8per_
    Yes, it's same, but a bit bigger Thx:) Yes, but it was steered by all axles, but this model has one driven axle that is not steered. In this case it's better to do steering like i did. Sorry 😐 I will fix it later.
  16. mic8per_
    Mobile crane, same scale and size as 42108, but much more functions: Steering with realistic angle (inner axle turns less than outer ones) Fake 6-cylinder engine Boom raising (pneumatic) boom extending (hold in position by axle) Winch (lock in position by rachet) Cab tilting Only parts from set 42128 used, no cutting hoses or strings, no modifying parts. Building nstructions here: https://rebrickable.com/mocs/MOC-87883/mic8per/42128-mobile-crane/#details
  17. mic8per_
    OMG that's awesome!
  18. mic8per_
    Thanks!
  19. mic8per_
    This was sturdiest solution i could came up with. just by axles, almost no gears.
  20. mic8per_
    A flatbed truck, features HOG steering and 6 cylinder engine. Same scale as 42128. Instructions+parts list: https://rebrickable.com/mocs/MOC-85860/mic8per/6x4-flatbed-truck/#details
  21. mic8per_
    Impressive!!
  22. mic8per_
    This set is well designed, but I still think it's too expensive. Yes it is logical for all the C+ parts, but you can buy 2x 42128 (1x of them has 2k parts too) for the same price.
  23. mic8per_
    Great review, amazing set! I am going to buy this set. It looks really good without the stickers.
  24. mic8per_
    Amazing!
  25. mic8per_
    It has positive caster angle even despite the rake on the chassis. withnout the rake the caster angle would be about 30°, with the rake it is about 15°-20°.
×
×
  • Create New...