Jump to content

paave

Eurobricks Citizen
 View Profile  See their activity

  • Posts

    250

  • Joined

  • Last visited

 Content Type 

Everything posted by paave

  1. paave
    I have recreated this model. Now there's Turbo version with roof and spoiler: Made instructions for both Cabriolet and Turbo: https://rebrickable.com/mocs/MOC-87015/paave/porsche-964-911-turbo/#details https://rebrickable.com/mocs/MOC-87017/paave/porsche-964-911-cabriolet/#details
  2. paave
    Thanks! I might try to rebuild it later with some fixes possible.
  3. paave
    You compare the pictures from different angles, but actually yes, there's something with the roof. I noticed this, but putting it even a stud lower makes it look totally wrong. The overall looks for me has more priority than 100% proportions.
  4. paave
    Thanks! I prefered the simpliest decision with the reverse panel, it looks more harmonical and finished for me. The real thing is actually curved too, just not as much as the panel I used. I didn't want the whole rear looking totally flat. You can actually see the line in the door section. In the front I chose to put the 5x3 panel vertically, because I wanted it to look different than other Ferrari MOCs you could see from other people, who put 7x3 panel horizontally, so the line is possible to create. It was just about originality.
  5. paave
    I'd like to present a new MOC of mine - Ferrari F355 Scale: 1:10 Size: 43L, 21W, 13H, cm Weight: 1429g Parts: 1410 Video: Features: - Opening doors, bonnet, trunk - Pop-up headlights - Independent suspension - Remote control with Power Functions - PF: 2L, Servo, IR, LiPo You can find the instruction on Rebrickable page: https://rebrickable.com/mocs/MOC-84040/paave/ferrari-f355/#details
  6. paave
    Thanks! These panels are used to replicate the deepenings in the body, same as the reverse ones put on doors. I find it the best solution.
  7. paave
    Here's my replication of the classic Range Rover 3 door Info: Scale: 1:13 Size: L35, W15, H16, cm Weight: 1069g Parts: 1085. Video: Features: - 4x4 - Dependent suspension - Panhard rods on both axles - Opening doors, bonnet, tailgate - Adjustable seats - Modular construction - Remote control with PF: 2L, Servo, IR, LiPo. Original truck: Building Instruction can be found on Rebrickable: https://rebrickable.com/mocs/MOC-79523/paave/range-rover-classic/#details
  8. paave
    Thanks
  9. paave
    My next alternate model of the 42125 set - Dune Buggy It's a replication of the well-known Meyers Manx dune buggy. Also the BF Injection in the GTA games. Size: L35, W19, H13, cm Parts: 665 Weight: 610g. Features: - Opening bonnet and trunk - Full independent suspension - H4-engine - Working steering wheel. A width is 2 studs shorter, than it's in the original set, so I used the floating differential suspension system. Working well. See the video: Instruction is available on Rebrickable: https://rebrickable.com/mocs/MOC-76011/paave/dune-buggy/
  10. paave
    My next alternate model of 42125 set: Old Truck Size: 41L, 19W, 16H, cm Weight: 800g Parts: 956 Features: - Opening doors, tailgate - 4l-engine - Dependent front suspension with shocks - Dependent leaf spring rear suspension with Panhard rod - Working steering wheel Video: More ptohos: Instruction: https://rebrickable.com/mocs/MOC-73135/paave/old-truck/#details
  11. paave
    Thanks! Yes, it's not hard to put 11L liftarms there, but there are reasons not to do. With these gaps it's easy to turn on/off the battery, just using the antenna, so no disassembling and extra parts needed; the tower shape looks more rounded; the design is more clean; and generally, moderate level of gaps is a common thing in official technic models, and I personally like it Never happened during the tests. They may touch a bit, but it doesn't turn into accidents. To be more safe, some rubbers can be used to get the cables together in the center
  12. paave
    My new creation: Lighthouse Size: 12L, 11W, 53H, cm Parts: 400 Weight: 600g Features: - Working lights - 360° rotation - Opening door - PF: 2x LED, M-motor, LiPo-battery, IR-receiver Video: The instruction is free, it's inside the video. Check the Rebrickable page for the inventory: https://rebrickable.com/mocs/MOC-70910/paave/lighthouse/#details More Photos:
  13. paave
    Since the 42125 Ferrari set has blades... The features are: - Rotating propellers - Collective pitch control - Folding blades Video: More photos: Rebrickable page: https://rebrickable.com/mocs/MOC-68779/paave/helicopter/#details
  14. paave
    Thanks everyone!
  15. paave
    This is my alternate model for the 42125 Ferrari 488 set - Ferrari F12 Berlinetta Scale: 1:10 Parts: 1181 Size: 45L, 20W, 12H, cm Weight 988g - Independent suspension - Working steering wheel - Fake engine - Opening doors with limiters - Opening front part of the bonnet You can find the building instruction on Rebrickable: https://rebrickable.com/mocs/MOC-66207/paave/ferrari-f12-berlinetta/#details
  16. paave
    Awesome work, @steph77! I like the seats Isn't the rear suspension too hard now with these short arms?
  17. paave
    It's stronger when connected, chassis + body. But separately yes, not perfect I got those from the 9398 crawler
  18. paave
    Thanks! I just put what I wanted, as it wasn't meant to be a copy of a real car
  19. paave
    Thanks! Good luck! Looking forward to the photos
  20. paave
    Thanks. I suppose, it would be too heavy for the shocks. By the way, I was inspired by this photo: It's Plymouth Belvedere 1968
  21. paave
    Classic Police Car Parts: 1490 Size: L49 W22 H18, cm Weight: 1357g - Independent front suspension - Dependent rear suspension - Opening doors, bonnet, trunk - Doors with locks - V8 Engine - 4-speed gearbox - HOG-steering - Modular construction Video: The instruction is inside the video. Rebrickable page: https://rebrickable.com/mocs/MOC-63403/paave/classic-police-car
  22. paave
    Thanks all.
  23. paave
    Thanks. Black rims look more serious for me
  24. paave
    Thanks. They are quite rare, so I don't use them anymore Thank you. I like gaps For me those panels look fine, as it's the simpliest decision and they have right angles
  25. paave
    Here's a new MOC of mine, the Ferrari F8 Tributo Scale: 1:12 Parts: 1190 Size: L38, W19, H12, cm Weight: 812g - Opening doors, bonnet, trunk - Working V8 engine - Full independent suspension - HOG-steering - Adjustable seats - Modular construction Building instruction is available on Rebrickable: https://rebrickable.com/mocs/MOC-58958/paave/ferrari-f8-tributo/#details
×
×
  • Create New...