Bony_em

Yes, it looks good with the flexible cables, but the original is incredible... New photo with black wheels

new color, I haven't found a good windscreen yet

There are some things that I don't like about this one I did, for example the body, I think it could be done better, and the hands are very gimmicky...I still don't know how it would be in real life, I haven't tried it, but just so you know hold on...I see it bad it has the false eye, that would put a sticker on it and that's it but what can be done better, that's why I didn't post it on the internet to see if I could improve it

I have modified the windscreen, it still does not convince me but I have tried all the windscreens that exist from lego in LDD and this is the best I have found as you see from the front it's horrible but I don't know how to improve it so with colors that exist what do you think? I'm going to leave it as it was before, but I'm going to put this color.

I already have the buwizz battery installed in the moc and I already programmed it to my liking, but when I put it at fast speed (there slow, normal, fast and Ludicrous) it collapses and stops working, why? I use 2 buwizz motors in 1 buwizz battery, the moc is very heavy, I was thinking of buying another buwizz battery and connecting a motor to each battery but I don't know if it is the solution, I use buwizz 2.0

Thanks for the video it will be good for the next moc that I do with buwizz battery that I have pending, I have already solved what I asked in this post, when I finish it you will see it

but cookie I think it's just remove ads

So how do i do it? I put an xl motor in each wheel, that is, in the 4 wheels? buwizz 2.0 can come in handy for another moc that I will do later...or in this if you tell me how, because I need a minimum of 5 channels

I've changed my mind, what I'm going to do (the vehicle weighs a lot for now I don't know if it's because of the buwizz motors or not) is to put a motor in each receiver using only two buwizz motors. As you can see, the buwizz motor starts with an 8-tooth gear and goes to a 24-tooth gear and then again from an 8-tooth gear to a 24-tooth gear, and this last 24-tooth gear is the one that carries the wheel. what you say that the batteries can be turned off has happened to me several times, is it due to overload? and the gears from 8 to 24 were already like this at the beginning. i bought the buwizz 2.0

The question is that I just bought a buwizz battery, because they no longer sell 8878 batteries, and what I wanted to know is if you can connect 4 buwizz motors to the buwizz battery and have them work at the same time and also work on the remote as 2 motors on one lever and another 2 on another lever, if it is not possible I will settle for them to work in 2 v2 receivers and in each v2 receiver two motors and that 1 of those receivers go to the buwizz one battery and the other to battery functions In the image I think it is better understood. This post that I just made is not going away, so if the moderators see it badly, they should change it.

I wanted you to help me reject the privacy policy of the lego website, I want to know how to reject it. Thanks

Very nice vehicle , but are so many motors necessary?

looks good at the moment

a truck I made a long time ago, the transport and the fender are quite painted

surely I spray-painted the parts that weren't there, or everything, but I really like it that way, It is prohibited by the rule of the Lego god but I do not care yes total what does it matter the first ones I did are also painted With this I am not saying that you do it, if it can be avoided better it has more merit I think, but this moc is one of my favorites

I don't know if I can write here again in this post, if not remove it, I have changed the colors, the blue seemed very toy and blue tanks I think they don't exist I have put a more real color, and I have changed the links for wheels, the wheels are part 2573 . The blue I have used is sand blue. At the moment it is made by studio and LDD. And when I have it finished I will make a video because with the links it was very slow and I didn't like it so slow

If it is that I did not give much importance to the back part, since it cannot be seen it did not guide me, so I used the one with the Aventador, I think it was, but it did not turn out well... in the end I did it randomly, yes I I think it's the ugliest part of this car.

I don't know its name, I copied it from an image that I show you below, I just used that image as a reference, but from what I see of this it is like a Futuristic Lamborghini right? Later on I will show it with a rear spoiler, the chassis is the same as the Lamborghini Aventador I made. What it does is little, the front wheels turn but hardly, it has 4 cylinders unlike the fan that only had 2, the driver's doors open, it has no suspension and it has 4 seats I copied it from this: And that later I will show it with a spoiler.

Cheer up Jorge,The project is going well.

Very cool, one question, what is part 46834 and 46835, used for to force the shaft?

maybe I'll give it a chance, my head turned out well and I've already made another different pokemon and it's horrible and this one turned out well... now I wouldn't know how to hook the body balls without the pokemon collapsing, is something wrong?

I did this because among other things it is one of my favorites pokemon, right now it is totally disassembled I have nothing of this, I left the project because it was too big and to fit every part of the body omg, but before disassembling it I took these photos. As you can see from the front, you cannot see your eyes, that is also a failure that had to improve

Ok, this was the reason why I installed all the LDD 4_3_10, 12 etz minus 11 I think that was the problem, now I'm going to be prefect, thank you! One thing, with which you install the last update that puts in LDD new parts, you already install all or there to go one by one?

Hello, I recently bought a new pc and it comes with windows 10, with the previous pc that I had used windows 7, and the problem is that the LDD is not installed correctly and I do not know what the change log file is for. I did as it says in the LDD New Parts post, I used the extractor for the db file and for LDD.lif and LDDExtended.lif and I downloaded almost all the new parts files and I only changed Primitives for the old one, so with all of them, what I do Wrong? I think this post goes here if not change it, and also after having put it, the LDD is removed please help

mmmmm ... it will look very similar to this