damjan97PL

Hello. It's my inspired by Volvo FH 8x4 truck with lowbed 3 axle trailer. Dimensions: -Lenght: 64cm with trailer -Height: 14cm -Width: 9.5cm Parts: 1157 In 2017 i've made a similar truck but with other trailer. This is little modded version of it. A truck is controled by Power Function. A M motor is for drive with 1:1 ratio and Servomotor is for steering. It has enought power for pulling a trailer with wheelloader from 8453set. A trailer have a simple coupling system for two parts. Is operated by 4 axles. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/8x4-truck-with-trailer INSTRUCTION: https://rebrickable.com/mocs/MOC-260640/DamianPLE Technic Garage/8x4-truck-with-lowbed-trailer-pf-version/#details

Hello. I want to show you my new MOC, a FSC Star 200. A Polish truck produced from 1976 to 1994. Dimensions: -Lenght: 32cm -Height: 15cm -Width: 12cm Parts: 1283 INSTRUCTION I think its my the most non-technic model, its more like model team i think. It has a steered front axle with working steering wheel. Working 6 cylinders engine. A cabin has a openable door and can be tilted. Cargo bed is tipping by one linera actuator and its operated by removable knob. Im waiting for your comments :) MORE PHOTOS: https://bricksafe.com/pages/damianPLE/star-200

Hello. This is my newest MOC, a micro dumptruck by east germany factory IFA Multicar M25. Dimensions: -Lenght: 36cm -Height: 21 -Width: 15cm When I was a few years old I saw it on the streets, now one of it is standing on my desk. It have a standrad functions for dump truck. Its propeled by one XL motor, for steering I used a Servomotor. Tilting a bath is propeled by L motor. All functions are controled bby SBrick. Under the openable cabin you can find a BatteryBox and working fake 4 cylinders engine. A SBrick is mounted on the left side in "battery" shelf. Cabin have a opneable door and details in interior like dashboard and seats. Unfortunetly a steering wheel is not working. I'm waiting for yours comments. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/multicar-m25

Hi. I want to show you my newest alternative model of Lego Technic 42213 set, a Suzuki Samurai Dimensions: -Lenght: 28cm -Height: 14cm -Width: 12cm Parts: 727 INSTRUCTIONS: https://rebrickable.com/mocs/MOC-240072/DamianPLE Technic Garage/42213-suzuki-samurai/#details It has a front and rear suspension- swing axle Under the openable hhod you can find a 3 cylinders engine Of course you can open a doors. Inside cabin I mounted a seats and simple dashboard Front axle is steered by Hog. More photos: https://bricksafe.com/pages/damianPLE/42213--suzuki-samurai My INSTAGRAM: https://www.instagram.com/damianpletechnicgarage

Thanks for build and reviewing my model. I hope that you had fun when building it.

My alternative. 779parts. INSTRUCTION: https://rebrickable.com/mocs/MOC-229339/DamianPLE Technic Garage/42213-alternative-model-unimog/#details

Hello. This is my alternative model of LEGO Technic 42213 set- Ford Bronco SUV, a all-terrain dump truck inspired by Unimog Dimensions: -Lenght: 27cm -Height: 15cm -Width: 12cm Parts count: 779 INSTRUCTION: https://rebrickable.com/mocs/MOC-229339/DamianPLE Technic Garage/42213-alternative-model/#details Functions: -Steered front axle by HoG -Openable hood -Working V6 engine -Working suspension -Manually operated cargo bed tipping mechanism My dump truck is inspierd my Mecedes Unimog. In cabin i mount a dashboard with steering wheel and seats. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/42213-alternative

Any photos here of this moc?

Ideal set to build some truck from it

Hi. Its my new MOC a Chevrolet Blazer K5 from 1975. Dimensions: -Lenght: 23cm -Height: 12,5cm -Width: 12cm Parts count: 759 INSTRUCTION: https://rebrickable.com/mocs/MOC-224230/DamianPLE Technic Garage/chevrolet-blazer/#details It has a bigger wheels for better offroad properties and better look. Model has a openable door Steered fornt axle by Hog Front and rear suspension. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/chevrolet-blazer

Hi. I want to show you my new MOC a 1985 MACK Superliner which is a classic american semi truck. Dimensions: -Lenght: 37cm -Height: 15,5cm -Width: 11cm Parts count: 1522 INSTRUCTION: https://rebrickable.com/mocs/MOC-221889/DamianPLE Technic Garage/1985-mack-superliner/#details There a lot of version of this truck with three frame leght, and few cabin dimensions. My model have a semi long frame and short sleeper cabin. It's inspired by this model It have a openable door and engine bonnet. Under the bonnet its a fake working V8 engine. In the cabin you can find a working steering wheel, seats and dashboard 5th wheel have a lock mechanis operated by knob on the right side of frame Of courde a front axle is steered and you can remove a steering knob from roof for more clean look. That all from me, Im waiting for your comments :) MORE PHOTOS: https://bricksafe.com/pages/damianPLE/mack-superliner

HI. This is my newest model, a polish truck Star 266M 6x6. Dimensions: -Lenght: 50cm -Width: 17,5cm -Height: 20cm All functions are controled by SBrick It's propeled by 2XL PF motors with 6x6 drive with differential on each axle and central diff. For steering I use a Servo motor. Tilting a bath is operated by one big linear actuator and propeled by L motor. Max capacity is about 500grams It has a full suspension with 3 wishbones per axle. Cabin has a openable door and inside it you can find a detailed interior with seats and dashboard. Im waiting for your comments :) GALLERY

I made a instruction for it. HERE

Hi. It's my newest MOC, a small camper controled by Control+ Dimesnions: -Lenght: 23,5cm -Height: 10cm -Width: 9,5cm Propeled by C+ L motor with 1:1,67ratio. Front axle steered by C+ L motor. Becouse its small I didint make a interior or steering wheel. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/mini-camper-van

Hi. After my earlier alternative model of 42184 Koenigsegg set, I decided to build another model, this time a Hot Rod. Dimensions: -Lenght: 24cm -Height: 10,5cm -Width: 13,5cm Parts count: 526 It has a openable door, working V8 engine and steered fornt axle by HoG. It,s not inspired by any real hot rod. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/42184--hotrod INSTRUCTIONS: https://rebrickable.com/mocs/MOC-196511/DamianPLE Technic Garage/42184-alterative-model-hot-rod/#details

yes, with 1x1 round plate trans clear

Yes, it's a 2L red axle and 3l axle with worm gear

2,5 kilos, a quite heavy...

Hi. I want to show You my newest MOC, a 2021 Ford Bronco. Dimensions: -Lenght: 43cm -Width: 20cm -Height: 18cm When I bought a Lego 42160 Audi set I thought that a new tires from Audi will be fit perfectly on Bronco. So I built that. Front axle is steered by HoG, and we have a working steering wheel which you can easily detachable when you want to take off a body. In front suspension are double wishbone and new wheeel hubs from Audi. Rear suspension is a 5 link live axle. Of course like in a real car under the bonnet I mounted a V6 working engine. It has a two diff lock, central and rear. They are opearated by lever and red axle in the central tunnel. It has a low/high speed gearbox. Like in real car you can eaisly remove a roof and take off body from frame. We have a openable fornt bonnet, door and trunk lid. In cabi you can find a detailed interior. All seats are foldable. Front seats are slidable. Thats all, I waiting for Your comments :) MORE PHOTOS: https://bricksafe.com/pages/damianPLE/ford-bronco-2020

Looks similar to drivetrain in my Bronco

It's time to present my newest MOC, a John Deere combine harvester. It's inspired by S790 model. Dimensions: -Lenght: 27cm (35cm with header) -Width: 12,5cm (34 with header) -Height: 12cm Parts: 1428 My model is inspird by S790 by John Deere, but it's not a perfect copy. It have a different yellow stripes on the sides and different shapes of the rear mudguards. Funtions: Of course you can lift and lower a header. Inside a combine is a mechanism to switching on/off rotate a front blade. Header can by eaisly unhook from combine. Rear axle is steered by HoG When you need a more space in tank you can open a top flaps to fit more grain. Its time for unload? Now, you need to open a discharge tube. In cabin you can find a detailed interior with operator's seat, steering wheel and control panel. A ladder isnt rotate. When you ride on the public road you can a put a header on trailer and pulling it with combine. Thats all from me, Im waiting for your comments :) INSTRUCTION: https://rebrickable.com/mocs/MOC-188880/DamianPLE Technic Garage/john-deere-combine-harvester/#details MORE PHOTOS: https://bricksafe.com/pages/damianPLE/john-deere-combine-harvester

I was thinking that Hummer have a more square mudguards.

Hi. It's my alternative model of 42168 set, a lawn tractor. It's not a copy of any john deere lawn tractor. Dimensions: -Lenght: 19cm -Width: 11cm Height: 16cm Parts: 497 The mower decks is lowered/ raised by lewer mounted on the right side of seat. Blades are rotating only when a mower decks is in low position. They are propeled by small wheels. Front axle is operated by steering wheel. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/42168-alternative-lawn-tractor INSTRUCTION: https://rebrickable.com/mocs/MOC-171346/DamianPLE Technic Garage/42168-alternative-lawn-tractor/#details

Scania P-series Skip loader

Hi. I want to show you my newest MOC, a alternative model of Lego 42154 Ford GT. It's inspierd by BAC Mono, a one seat sports car without roof. Dimensions: -Lenght: 38cm -Width: 18cm -Height: 10cm Parts count: 1183 It has a front steered axle by HOG, front and rear independent suspension, working steering wheel. Behind a seat is mounted a 4 cylinders engine with fake turbocharger. From original Lego model I use a only few stickers. With speedometer and with air inlet. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/42154--alternative-model INSTRUCTION: https://rebrickable.com/mocs/MOC-166845/DamianPLE Technic Garage/42154-alternative-model/#details