damjan97PL

Scania P-series

Hi Guys. Today I want to show you my latest creation, a Scania P-series with fuel tanker. -Lenght: 38,5cm -Height: 15,5cm -Width: 14cm Parts count: 1864 Functions: -Drive -Steered front axle -3rd axle with lift system -Openable cabin and door -Fake 6 cylinders engine A truck is propeled by L motor and front axle is steered by servo motor. 3rd axle lifting mechanism is propeled by M motor and operated by 1 small linear acctuator. Cabin can be tilted and it has a openable door. Under the cabin is a fake 6 cylinders inline engine. A battery box with IR receivers and M motor are under the fuel tanker. On the right side is a openable storage. I'm waiting for your opinion :) GALLERY INSTRUCTIONS

Hi. It's my alternative model for lego set 42151,a 24h LMP1 Race Car. My model is not based on real LMP1 car, it's a mix o few different cars. Dimensions: -Lenght: 29cm -Height: 8cm -Width: 13cm Parts count: 786 Functions: -Steered front axle -Openable door -Fake v6 working engine GALLERY: https://bricksafe.com/pages/damianPLE/42151--alternative-model--lmp1-race-car INSTRUCTION: https://rebrickable.com/mocs/MOC-146229/DamianPLE Lego Garage/42151-alternative-model-lmp1-car/#details

Hi. Its my newest moc, a mini articulated dump truck. Dimensions: -Lenght: 21cm -Height: 18cm -Width: 12cm Parts count: 729 Functions; -Articulated steering -Tilting a bath -Fake 3 cylinders engine -Openable engine cover A bath tilting mechsanism is operated by 1 mini linear acctuator and steered by warning light on the top. You can steering it by the steering wheel. Its not have a HoG. I mounted a fake 3 cylinder engine under the openable engine bay. Its propeled by rear right wheel. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/minidumpertruck INSTRUCTION: https://rebrickable.com/mocs/MOC-138254/DamianPLE Lego Garage/mini-articulated-dump-truck/#details

Hi. Today I want to show you my newest moc, a long nose truck with bottom dump trailer. A truck is a my alternative model of 42128 Lego set with PF bricks. A bonnet and first part of cabin is the same like in original model, but the frame and sleeping part is my project. A truck is propeled by L motor and front axle is steered by Servomotor. A batterybox is in sleeping part. The fifth wheel is on the same height like in the Lego Mack model, so you can attach other trailers. Dimensions: -Lenght: 40cm -Height: 18,5cm -Width: 13cm Time for trailer. Its a bottom dump trailer. Something like this- https://www.zieglercat.com/assets/files/Advantage-Series-Bottom-Dump_2.jpg This trailer have a two functions, lowered supports leg and and openable lower gate. Supports leg are operated by m motor. Lower gate is operated by worm gear and propeled by L motor. Of course you need to attach a PF wire of trailer to battery box in truck to can use all functions. Dimensions: -Lenght: 54,5cm -Width: 12cm -Height: 14,5cm A set lenght is 84cm. INSTRUCTIONS: https://rebrickable.com/mocs/MOC-117779/DamianPLE Lego Garage/bottom-dump-trailer/#details https://rebrickable.com/mocs/MOC-104591/DamianPLE Lego Garage/42128-alternative-american-semi-truck/#details FULL GALLERY: https://bricksafe.com/pages/damianPLE/american-longnose-truck-with-bottom-dump-trailer

Hi. Today I want to show you my alternative model of Lego set 42136 John Deere. A truck with dump. Dimensions: Lenght; 28cm Width: 13cm Height; 18cm Parts count: 377 Model has a two functions, HoG steered front axle and manualy operated tlting a bath. It's inspired by Mercedes Unimog and Zetros. A bath is almost tha same like in original Lego set John Deere. More photos: https://bricksafe.com/pages/damianPLE/42136--alternative-model Instruction: https://rebrickable.com/mocs/MOC-114693/DamianPLE Lego Garage/42136-alternative-model/#details

Hi This is my alternative model of Lego set 42135, a Dune Buggy Dimensions; -Lenght: 19cm -Width: 11cm -Height: 10cm Parts count; 222 Model has a pull back motor. In cabin i mount a driver seat and imitation of 4 cylinder engine. A construction is very solid , you can see it on the video. GALLERY: https://bricksafe.com/pages/damianPLE/42135-alternative--dune-buggy INSTRUCTION: https://rebrickable.com/mocs/MOC-99004/DamianPLE Lego Garage/42135-alternative-dune-buggy/#details

Hi Everyone. I want to show You my alternative model of Lego 42128 set, a flatbed truck with crane. Dimensions: -Lenght: 44cm -Height: 22cm -Width: 14cm -Weight: 1450g Parts: 1701 Functions: -Openable cabin door-Openable cabin-Working 6 cylinder engine-HoG steering-Openable sides-Extendable rear supports-Rotating crane-3 section boom crane Model have a openable cabin and working 6 cylinders inline engine. In the cabin are two seats and dashboard with steering wheel. Behind the first and second axle are a two knobs for rotating a crane and sliding a supports. On the right side a mount a pump for pneumatic system. Secend and third axle are not lifting. Suppert legs are extendable in two stages. First, by knob on the right side, slides to the sides. Then by the knobs on the right and left support leg to the down. A crane is rotating and has a three section, last section is extentable. Is rotating by knob on the right side. I mount a all three pneumatic valves in rear section on model. You can rotate it in almost 360 degre. At the end of the crane is mounted a hook. MORE PHOTOS: https://bricksafe.com/pages/damianPLE/42128--alternative-model INSTRUCTION: https://rebrickable.com/mocs/MOC-96339/DamianPLE Lego Garage/flatbed-truck-with-crane-42128-alternative/#details

Some of my trucks in different scale.

It's narrow like a original vehicle

Hi Everyone. This is my newest MOC. Undergorund mining dump truck. Dimensions: -Lenght: 55cm -Height: 16cm -Width: 16,5cm -Weight: 2325 grams Tilting a bath i operated by 2 linear actuators propeled by L motor with 1,667:1 ratio. It can lift a about 1kilo of material. A model is propeled by 1 XL motor with 3:1 ratio. It has a 4x4 drive with two diffs. Under the front clap is mounted a fake 6 cylinders engine. Articulated steering system is operated by 2 small linear actuators propeled by M motor. Ratio 1:1. In cabin you can find a drivers seat and steering wheel. In front of vehicle I add a lights. It has no suspension. FULL GALLERY: https://bricksafe.com/pages/damianPLE/underground-mining-dump-truck

Dont have enought 2L liftarm

Hi Everyone. Today I want to show you my newest MOC, a Hummer H2. Dimentions: -Lenght: 47cm -Width: 21,5cm -Height: 20,5cm -Weight: 3225grams Model has a 4x4 drive with three differentials. For propel I used a 2 XL motors. Under the bonnet you van find a fake V8 engine. It has a full suspension. In front a independent, at rear- live axle. Front axle is steered by servomotor. I added a working steering wheel. Front bonnet, rear rear flap and all doors are openable. Front doors have a locking mechanism. I was trying to make a interior to much similar to real one like a technic bricks let. A front seats are adjustable. I mounted a SBrick beetwen rear seats. I think that is not bad. I like how suspension is working and design of body. Im waiting for Your comments :) FULL GALLERY: https://bricksafe.com/pages/damianPLE/flatbed-truck/hummer-h2-sut

Hi. It's my new creation, a Flatbed Truck. Dimensions; -Lenght: 45,5cm -Height: 16,5 -Width: 15cm -Weight: 1650g Parts count: 1664 It's my another truck on wheels 49,5mm. Truck a few functions- drive, steering wheels and lifted 3rd axle. Truck is propeled by L motor with 2.33:1 ratio. Front wheels are steered by Servo motor. Last axle is lifted by worm gear propeled by M motor with ratio 40:1. In this mechanism I used a teethgear z24 with clutch. A bed has a 7 openable sides. BatteryBox is behind the cabin, which is easy to replace. You can switch on/off it with red 15s beam. Cabin has a openable doors and detailed interior with seats and dashboard. I'm waiting for Your comments. INSTRUCTION: https://rebrickable.com/mocs/MOC-60643/DamianPLE Lego Garage/flatbed-truck/#comments PHOTOS: https://bricksafe.com/pages/damianPLE/flatbed-truck

Photo of chassis Springs are mounted to lifting mechanism, so they are lift with axle.

Hi Everyone. It's my new model , a skip loader. Dimensions: -Lenght: 46cm -Height: 27,5cm -Width: 15,5cm -Weight without container: 2550 grams -Weight with conatiner: 2900 grams Few years ago I also built a 3 axle skip loader. This is more advanced and looks better. Model has a full suspension, tilted cabin under which is a working R6 engine. Behind a cabin is a BatteryBox. Truck is propeled by 1 XL motor with 2.33:1 ratio. First and last axle are steered. Third axle in opposite direction to first axle. Steering by Servo motor. A third axle is also lifted with automatically detachable steering with clutch system. Operated by 2 M motors, one for lifting a axle and second for clutch steereing. Rear support foots are operated manually. I used 2 small linear actuators. Lowering the arm is operated by 2 long linera actuators propeled by L motor with 8:1 ratio. Arm is little to high but its a only one solution to accord a minimum height after lowered the arm and range of arm. Arm is lowering slowly, almost one minute. All functions are controled by sBrick. Cabin has a openable door and detailed interior. All functions are working fine and truck is driving and steering good. I'm waiting for your comments :) MORE PHOTOS: https://bricksafe.com/pages/damianPLE

Hi. This is my alternative model of Lego Technic 42107 Ducati Panigale V4 R Dimensions: -Lenght: 32,5cm -Height: 17cm -Width: 11cm -Parts: 568 Functions: -Front/rear suspension -V4 fake engine -Side stand My model isn't based on the real motorbike. It has a front and rear suspension, V4 engine (similar to orignal model) and side stand on right side. Its without a 2 speed gearbox becouse I think that is a not nessesary function. Model has a 568 parts, includin a few spare parts from original lego set. A suspenion is very similar to Ducati version. I like this look and stiffness of frame. INSTRUCTION: https://rebrickable.com/mocs/MOC-45868/DamianPLE Lego Garage/ducati-panigale-v4-r-alternative-model/?inventory=1#comments MORE PHOTOS: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=580376

Hi. Today I want to show You my new model, a wheel loader. It's my second attempt to build this type of vehicle. I built one a few years ago, but it wasn't fully motorised and looks not good. This model looks much better but its not a perfect MOC. Technical data: -Lenght: 47cm -Height: 19,5cm -Width: 15,5cm -Weight: 1550grams Model is all wheel drive propeled by XL motor with 3,89:1 ratio. Steering system is operated by 2 small linear actuators propeled by M motor with ratio 1:1.667. Front arm is operated by 2 linear acctuators. They are propeled by L motor with ratio 1:1. Bucket is tilting by linear actuator propeled by M motor. All functions are powered by standar battery box and controled by SBrick. It has also a rear oscillating axle and openable rear hood. Under the hood is a working fake 6 cylinder engine. Cabin has a openable door, driver seat and working steering wheel. All functions working fine. It can pick up a few stones. I'm waiting for your comments :) MORE PHOTOS: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=580046

Is this a good picture of chassis?

8. G-Class Every one know what car it is. Dimensions: -Lenght: 37 studs -Height: 17 studs -Width: 15 studs Functions: -4x4 drive -Working 6 cylinders engine -Openable hood and doors -Steered front wheels with working steering wheel -Full suspension And photo of chassis: Forum topic:

I think that is done.

No, but is a 2x2

Hi. I make some progress. A body is almost finished, time for interior.

Yes, but I don't have it :/