Jump to content

Samolot

Eurobricks Citizen
  • Posts

    249
  • Joined

  • Last visited

Everything posted by Samolot

  1. Steam pink war machine takes lego princesses to war. So what happens when daddy gets to his daughter's bricks.
  2. Model B for Libherr 42100 made by Eric Trax inspired me to try my hand at this topic. I have never made an alternative model, although I made an unsuccessful attempt when I bought Mack. But to the point, such a dumper was in my folder with inspirations for a long time, so the choice was simple. I think it fits perfectly with Libherr. The panels should be right on the chest and the cabin. Four motors and one hub are enough to drive. All electrics will fit in the chassis
  3. This model was created many years ago but there was no film and official publication on the forum. The quality of the film leaves something to be desired because it was only after disassembling the model that I realized that I did not record enough material. But you can see that it drives and floats My friends returned from the polar station in Antarctica and in the pictures they presented was such a vehicle in red. Somehow it seemed to me that you could stuff the Lego system hull in the middle of the technic model. I did a quick mass test which showed that the model could not exceed 1 kg. Two days later, the prototype was ready for testing in the paddling pool. After testing, it turned out that it is light enough that I can afford even a small load to make it look more interesting. The model is very simple, it only has a mechanism separating the drive from the engines to the track drive wheels and propellers. On the wheels, the speed is reduced and on the bolts increased. Both PF m, L and XL can be used for the drive. The power supply is from a PF battery because it was the lightest and with a brick so that there would be no trouble with the range. The torsion bar suspension is 1 stud thick, which was a prerequisite for the model not to sink too deeply into the water. The proportions were a compromise between the available technical panels and the system hull. Let's say it looks ok only the wheels should be a bit bigger. That's it, enjoy watching.
  4. Thanks. Off-road version is also available on my channel.
  5. Thanks, scale is about 1:12. There where so many versions of GAZ 52 and 53, if you search the internet for a while you will find similar to my model easily.
  6. Gaz 53 Some time has passed since the presentation of my Zil 130, I decided to disassemble the chassis from this model that has been on the shelf for a long time. But when I picked them up, I decided to bake another roast on this fire and build Gaz 53 on this frame. On this occasion, I also wanted to show how Gaz53 differs from Ził 130 because ... Ził 130 Gaz 53 People often confuse these vehicles, in real Zil 130, Gaz 52 and Gaz 53 they were very similar, but they were different class trucks. Gas 52 had a capacity of 2.5T Gas 53 3.5T and Zil 130 5T. All of them were available in many variants of construction and wheelbase. They also differed in engines, the weakest was 52, about 75 hp, the stronger was 53, 90 or 115 hp, and Zil 130 had a v8 V8 with 178 hp. Often they were also similarly painted, a blue cab with a white front. Returning to the model, I remembered that the disadvantage of my Ził that you noticed was a slow steering system. In Gaz 53, I decided to change it and instead of the version with the virtual pivot I introduced a classic solution with PF servo. Now it works much faster but there is no working steering wheel anymore. I tested the model in two variants with PF Battery and alternatively with Buwizz.
  7. It was a great pleasure to start this competition. Thank you for the votes and congratulations to the winner and all the participants. The competition was strong so I enjoy third place. I can't wait for the next competition.
  8. You both did a professional job. Beautiful model, great proportions and details. Very high-quality video. And instructions at the highest level. Bravo
  9. Absolutely superb. Nice proportions simple clean design. I am falling in love.
  10. I am not sure if it was similar, if so I am sorry. It is an axle that allows you to make independent suspension in a very narrow body. To drive them, two propeller shafts are required. Built for my new model.
  11. Thanks also I have a great fondness for these vehicles. Although they were of poor quality and very gas-eating. One is still driving around my hometown but has a diesel engine.
  12. Thank you for your positive opinion. I am sending more suspension photos. The front wheels have leading arms to attack obstacles. Middle and rear trailing arms. the suspension has four shock absorbers 48912c01 and two 32181c02.
  13. Thanks I tried not to overload the vehicle to drive well in difficult terrain Here are some detailed suspension pictures
  14. Great model I like the layout with two steering axles at the back. The colors and the number of functions are impressive. Cool details in the style of Mad Max
  15. 3. Zil The Peacemaker This time Mad Max came to post-apocalyptic Russia. In the wilderness of Siberia, you can find gangs with universal vehicles that are good at rough terrain. These groups are involved in finding the remains of planes, rockets and helicopters shot down during the nuclear war.
  16. My entry to the TC 17 This time Mad Max came to post-apocalyptic Russia. In the wilderness of Siberia, you can find gangs with universal vehicles that are good at rough terrain. These groups are involved in finding the remains of planes, rockets and helicopters shot down during the nuclear war. These wrecks are the only source of raw materials and spare parts in the new reality. That is why they are extremely valuable booty. Zil Peacemaker is a heavy tow truck for towing wrecks in rough terrain. But when the crew is in danger, they can use a powerful trebuchet throwing explosives. Trebuchet has a sight installed in the cabin. The weapon operator also has the opportunity to greet intruders with a volley of dangerous arrows thrown from a hidden combat compartment. In addition, in a direct fight, the vehicle can cut the tires of enemy vehicles with a special saw. Ził has a permanent 6x6 drive inspired by an American combat drone called Crusher. My model Powers 6 motors PF XL powered by two BuWizz batteries. The suspension has a unique ground clearance of 9 studs and each wheel is suspended on the swingarm with 8 studs travel. The model does not have a steering system, it performs maneuvers like a tank by varying the speed of rotation of the wheels on both sides. Vehicle weight 3.1 kg, length over 50 cm.
×
×
  • Create New...