efferman

the fenders on the first axle are original, so this one is not available for discussion. On the second axle i can do something like on the last axles.

a small question, how do you like the the line of fenders?

thank you very much for the feedback. was your part polished from shapeways or not?

there are are two changes: first i have saved material to make it cheaper and second i switch to outside gearing with 89 teeths for using wormgears directly. next week i will see how good,or bad, both works

thanks for ordering. Feedback is every time welcome but the mcpherson parts and the male cv joints are most interesting this time

No, the internal planet gear works still fine. Only the 12 tooth bevel gear between the xl and the 20 tooth freewheel is converted into two pieces.

9 : 10 2 : 6 3 :4 7 : 3 8 : 2 4 : 1

i hope it will be not to heavy, but lifting capacity is existing enough

the actual weight is 5,5kg how it is shown on this picture

thank you very much btw, the crane is on the frame again

look yourself

a big part of the stabilizers is done

sariel is testing the high torque diff. i think can give you a answer next days

congratulation, this is a true masterpiece. do you think it was worth to use the 49,5x20s tires?

Yes, the actuator works fine. unfortunately i have to replace the turntable. It is my very first printed part and has to much play in the vertical axis and the driving gear is jumping under high load.

indeed, but how would it look with lego Actuators? btw some lifting and pulling with this 5kg of technic

i dont like buying AA batterys btw, the final craneboom concept

Yes it looks a bit high. we will see how it fits to the finished vehicle a picture of the power supply and the turntable

more progress

this 1500 pound printer dont prints nylon and iam not a bussinessman. beside this a own printer would be very cool

ok shapeways makes at october the 7th a change in prices. large single pieces will be cheaper, Sets with many small pieces will cost more. some examples rigid hose connector 10 very small pieces from now 3,10€ to 15,62€ wheelloader rim four large pieces from now 49,09€ to 74,90€ rim for tire 116 36 R11 one extremely large piece from now 80,70€ to 64,38€ truck frame piece one large piece from now 26,18€ to 21,26€ to solve the set problem i have to make the sets to handle like one piece. i have done this at the torsen diff yet torsen diff 36z this is made by a 0,8mm string which is going through the holes and holding the pieces together.

yes black build, but in different colours. MajklSpajkl, good question, but unfortunately i dont have made long time studys about this some progress on the cab

the original has two seats too. for the assistant or the drivers lunchbox

the 12 tooth bevel gears have, like in 9398, to be all on drivers or on co-drivers side. this is in the model done. the error is a wrong tire on the last axle. new pictures with a part of the cab

looks great. i think this will be my winner