Search the Community
Showing results for tags 'Building'.
Found 310 results
-
Eleonor Boat Restaurant is a typical restaurant built on a river boat. The set includes a small marina and 9 mini figures. Eleonor is a modular LEGO Boat Restaurant. It is designed to be compatible with existing modular LEGO buildings and it is constructed on a 32 x 48 base plate from 1837 pieces. The model is made up from 2 modular levels featuring a cafe/restaurant and a hold with engine room and galley. Level 1 - The restaurant The restaurant has access from the marina crossing a small bridge. On the inside there are the counter and the kitchen, tables for customers and a piano designed to create a romantic atmosphere. The interiors are decorated with many details: table lamps, wall lamps, curtains, the counter with the cash register, the stove, the sink and the piano. At the stern and bow there are two outdoor spaces provided with tables and umbrellas. The roof has a window that enable the light to come from above directly to the dining room and to a little control tower where the boat commands are managed. Level 2 - The galley Below deck is located the restaurant galley, the engine at the stern and in the bow, two camp beds for the cook and the old captain. The galley is full of stocks for the restaurant such as: barrels, crates with fish, crabs and lobsters, barrels of fuel for the engine. Thank you! Thank you for checking out my project and for the support. https://ideas.lego.com/content/project/link/a0285bdc-2989-4960-9687-1efd19e50766
-
A little LEGO Digital Designer project I have been working on since the beginning of March...now rendered in stud.io using highest settings and a very large size of 4800x3600 Odense Banegård The train station was drawn by Danish architect Heinrich Wenck and built in 1913-1914 in the city of Odense, Denmark. It was used as such until 1995. The building was later bought by the city, housing the city's music library for several years. The actual Odense Banegård My model: Scale: Minifig or approx. 1:50 Area: 3 x 8 baseplates 32 x 32 Number of parts: 23.223 The ground floor consist of 2 wings and 1 main building which all can be separated. The roof consists of six sections which can be removed, giving access to the building inside. The platform consists of multiple sections which can all be clicked together for added stability. Frontside: Facing one of the city's many old parks, Kongens Have (The Royal Garden), separated only by road (and a light rail line from 2021). Trackside: A mix of its appearances during different ages with a few modern train station equipment added as the building isn't used as such anymore...and I didn't want to fill this side completely with bicycles Rigth wing: Facing musikhuset Posten (live music venue) which was originally built as a parcel post office in the same architectual style. The two buildings are separated only by a small paved area, now a parking lot. Left wing: Facing Danhostel Odense City or what is left of the hotel when the new monstrosity Odense Banegård Center was being built in 1995 and needed the space. The main clock: The main platform doors:
-
Hi everybody, My new Moc, a french little market with 3 different buildings. on the left side it's a french "tabac- presse" with an appartment, i copied the building of maximB for the 1st and 2nd floor on the right you have a comic and goodies store inspired by a store you can find in my home town and in the center there is a building with a japanese restaurant that i've invinted hope you'll enjoy Sans titre by Jean Macou, sur Flickr all the pictures here https://www.flickr.com/photos/99827811@N03/with/49656698032/
-
A Courthouse for the LEGO modular buildings https://ideas.lego.com/content/project/link/5925ee2f-9a2d-4bb7-9135-399f4fccae73
-
Hi all! I want to share my classic castle creation "Secret of the Castle". I was inspired by the 35th Anniversary of Black Falcons and Lion Knights / Crusaders (1984 - 2019), and I wanted to celebrate it by creating this MOC. I submitted it to "Lego Ideas" two days ago, so if you like it you can support it there: https://ideas.lego.com/projects/23b323b3-99c8-4427-b89a-0c6a7d3b7cda If enough Historic-themed projects get a large amount of supporters on "Lego Ideas", maybe the Lego Group will realize there is enough interest in those kind of themes and they will finaly release some new historic-themed sets. Story The prince and the princess are in love with each other. Since they come from warring factions, their love must stay secret for now. He came all the way from his castle to see her, bringing her flowers from a forest. But will castle guards notice him? And will he return safely home through the dark forest, where outlaws are preparing an ambush? Design I designed this MOC to be an interesting model as a standalone set, with excellent play value. At the same time, I made sure that it fits nicely with classic Lego Castle sets, by using styles and standards of modular castle design from the 80s. It can be connected to any Castle building from that period (by using Technic pins at the ends of the castle walls). The color palette is limited intentionally so that it reflects the style of the classic Castle sets, because my goal was to give this MOC a strong "retro feel". Minifigures The princess and the prince are new miifigures, and the other minifigures have updated torso designs based on the designs from the 80s. All minifigures have two different faces - a classic "standard grin" face, and a face with modern design. The castle guards, Princess and Prince have double-faced heads (since their hair / helmet / hood covers the back of their heads). Two heads would be provided for the Forestwoman and Forestman (since their caps do not cover the back of their heads). Parts The total number of parts is 925. All parts are current - virtually all can be found in different sets released during 2018 / 2019 (some in a different color than in this set). Therefore, molds for all those parts should be available and so Lego would not have any problems producing them. Only new prints / stickers would be needed. I integrated some of the new elements and utensils in this build (for example, new types of panels and windows, new arches, flames on the torches, sack, pot, new sword, etc), but I chose only those that hopefully don't stand out too much from the "classic style". A new variant of Black Falcon’s shield is included, with whole Falcon in black color on white background.
-
Hi everyone I'd like to present my latest MOC, and the follow up to my previous Modular, "The Queen Bricktoria Pub". This time I've designed another British style building, a Post Office, set some time during the late 1950's. There is much more to it than just a Post Office though. Read on to find out more... As you can see this modular building has 3 floors and is built on a 32 x 32 base plate. I have designed it to appear as 2 separate buildings situated around a small town square. The post office is intended to be the main focus of the model but the building on the right also contains a fish & chip shop and other businesses. The Minifigures I've included 6 minifigs with this MOC. From left to right they are: Post Office Worker, Post Office Manager, The Postman, Chip Shop Owner, Cafe Barista and a Business man. Brick Square and Ground Level Details Both the buildings are arranged around "Brick Square". I've included a small flowering tree in the centre of the square and outside the post office there is a pillar box, bench, rubbish bin and flower pots. Outside the fish and chip shop is a table with parasol. The Pillar box is a simple build made up from 2x2 round bricks, plates and tiles, stacked up and held together with a technic axle running through the middle. The shaped slot section towards the top is made from a red wheel flipped on its side. Sandwiched between both buildings is a shared stairwell which can be accessed from the street. This is how the minifigs access the upper floors. The Post Office The pictures below show the interior of the post office. Mail Sorting Office On the floor above the post office is the room where all the mail gets sorted, ready to be sent out. This room is accessed via the stair well outside the post office. Fish & Chip Shop Another iconic British building - a fish and Chip Shop. The shop sells chips, battered fish, burgers, sausages and drinks. Coffee Shop Above the Fish & Ship Shop is a little cafe with a coffee machine, cake stand, table and seat. In the corner of the cafe is a stair case leading up to the top floor. Office Above the cafe is an office used by a local businessman. I've included a desk with drawers, telephone and paperwork. There is also a grandfather clock and plant pots. Mail Van I have also included a vehicle with this MOC, a vintage style Mail van. The Finished Model Here is a shot of the Brick Square Post Office, alongside my other modulars, The Queen Bricktoria and Convenience Store. If you'd like to read more about these other MOCs then follow the links below. Convenience Store Queen Bricktoria Thanks very much for reading. If you'd like to see more pictures of the Brick Square Post Office then head across to my Flickr page, I've added over 60 pictures of it there. I hope you like my latest MOC, feel free to leave comments and let me know what you think. EDIT: Building instructions for this MOC are now available from Rebrickable at the following link https://rebrickable.com/mocs/MOC-22101/Bricked1980/brick-square-post-office/#comments
-
Apple Square Research Center is a 4-story 96x96 modular building conceived as a revision to my original Apple Square University. Designed entirely in Lego Digital Designer (Stud.io needs an update before I could adapt), this iteration is also influenced by a locale in a Japanese RPG (サクラ大戦3), the Antwerpen-Centraal Station in Belgium, as well as my ongoing career as an electrophysiologist. ASRC and ASU will be on display together at the next Brickworld Chicago (June 20-21, 2020). For more, follow me on flickr or instagram.
-
Hi everyone! I am Angle, a new member from Macau. I'd like to share my latest MOC - the modular building version of 221B Baker Street from Sherlock (BBC). This model is inspired by Sherlock - a BBC drama TV series based on Sir Arthur Conan Doyle’s famous Sherlock Holmes detective stories. The building exterior is based on the combination of North Gower Street, which is “Baker Street” in the drama and the Sherlock Holmes Museum in London. The interior is decorated with completed furniture to recreate scenes in the drama. In order to increase playability, the model is hinged in a few places. You can either separate it level by level liked any other modular buildings, or just separate it in the middle liked a dollhouse. The model is constructed on a 32 X 32 baseplate. No stickers is applied. Ground Floor : Speedy’s Sandwich Bar & Cafe, The entrance & corridor of 221B, Mrs Hudson’s kitchen The counter and dining area is based on photos of Speedy’s sandwich bar & cafe I searched from the internet. The toilet, kitchen and storage room are all by my imagination. According to the floor plan I got from the internet, Mrs Hudson’s apartment should be on the ground floor just behind the cafe. However, in order to place the whole building onto a 32 X 32 base plate, I kept the kitchen on this floor but had to move her apartment to the second floor . First Floor : John & Sherlock’s living room, kitchen, Sherlock’s bathroom & bedroom This floor is mostly based on the amazing 360° google map of the 221B interior setting in the drama. Sherlock‘s bedroom was moved from the back to the right-front, for the same reason of Mrs Hudson’s apartment. Some easter eggs such as sherlock’s experiment material(s), the yellow spray paint and the persian slipper are hidden in this messy scene. Second Floor : John ’s bedroom & toilet, Mrs Hudson’s living room & bathroom Unfortunately, John’s bedroom and Mrs Hudson’s apartment were always behind the scene, so this floor is completely based on my imagination. John and Mrs Hudson can access to their own private space through separated door-gates. Mrs Hudson’s bedroom is mainly decorated in light purple. (According to the clothes and accessories she wears in the drama, I guess she is a fan of this colour.) Although no kitchen is at this floor, there is an electric stove for her to make tea. Roof : Mrs Hudson’s roof garden I made a small garden for Mrs Hudson to plant her flowers and vegetables. I am pretty sure Sherlock will frequently "help fertilizing" them after finishing his experiments. Minifigures: At this moment I only finished 4 minifigures :Sherlock, John, Mrs Hudson and Mycroft. All minifigures are created from official minifigure parts. Other characters will be completed at the following updates. LEGO IDEAS: I've submitted this model as a LEGO IDEA project. To everyone who likes this model, I would be very grateful if you can head forward to the following link to give this model your support. 221B Baker Street from Sherlock (BBC)
-
Hey guys, I decided to create this topic and the main idea came from this and this post (so special thanks to @danth and @Digger of Bricks!). I would like to highlight three things before I start to post inspirational MOCs: I’ll post three staff picks everyday! Please feel free to post your favorite MOCs! Have fun admiring and taking inspiration from those great MOCs Top three MOC’s IMO in Baroque architecture: 1. This incredible Baroque Church by @Jellyeater! 2. This amazingly detailed MOC by @pj_bosman! 3. This greatly shaped modular by @cimddwc! Here are the three best Baroque MOC’s IMO! What do you think about them? Would you buy modulars like those if TLG made? Here are the Steampunk ones: 1. This incredible layout made together by @castor-troy and @domino39 (they also made one MOD of the PR and the MS and two MOD’s of the CC included in this layout. But they look so different that they are more MOC then MOD). EB topic here and Flickr albums with more photos here, here, here and here. 2. These great Steampunk modulars by @adde51! 3. These very interesting modulars by @Zilmrud who as well made great MOD’s of the PC and the BB! Here are the three most gorgeous Steampunk MOC’s IMO! What do you think of them? Would you buy modulars like those if TLG ever made?
-
Allan's Speed Champion inspired vehicle and building creations.
AllanSmith posted a topic in LEGO Town
Inspired by the Speed Champions cars. Last year I built a car showroom to show them off. Al's Autos is built on 3 large baseplates. On the left baseplate the blue and white sign has doubled sided brick plate writing and rotates on a Technic turntable. The showroom has a roller door entry behind the office on the left. It is fully tiled inside and lit with PF LEDs. On the right baseplate the brown turntable also rotates on a Technic turntable. The footpath is designed to match up to the Modular footpaths. My own creation cars are a Pick Up truck with removable Camper. A Ford GT40 reverse engineered from a LEGO YouTube movie. The black Pontiac is a KITT replica and has a working red LED scanner in the front. Next was a service centre / workshop for the showroom.The back section is a parts department. On the right are two service bays. The front one has a working Technic pneumatic hoist. Also PF LED lighting. The shipping containers can fit a Speed Champions car or spare parts. To keep the cars clean I next built a car wash. This has a working Technic based linear actuator to move the brushes back and forward over the car. So after a long day. It's off to the Drive In movies. The diner has a projection room, kitchen, counter, seating and toilet. My own creation cars are two NYPD police cars with working light bars. A yellow NY taxi. The two Porsche 911's are modified with brick headlights and door handles. The ambulance has working LED light bars, headlights and taillights One day I will get around to doing close up and interior photos. -
Hi everyone I'm new here in the forum and like to share my first MOC which I have been working on over the last 3 months. I build the MOC with BrickLink Studio 2.0 and used the new Eyesight Render for my images. I love the modular building sets from Lego but I missed the detail level on the upper floors. According to this I decide to design and build a more detailed modular building with more minifigures than the regular ones from lego. This building represents a classic British pub with a lot of typical details like a British cab, a London phone box, a classical English pub facade with a lot of flowers and much more. The modular style building with 3 floors and an accessible roof is built on a 32x32 base plate and contains 32 minifigures and approximately 6000 parts. Level 1 - Bar The first floor contains the main bar area of the pub and small full-featured restroom with toilet, urinal and lavatory. Outside there are bar tables and a red phone box. Minifigures Craftsman enjoying his after-work beer Bobby (Police Officer) on patrol Barkeeper and owner of the Lion Pub Regular guest who enjoys his retirement Best friends enjoy their free evening Level 2 – Gambling room The second floor features a gambling room complete with a pool table, poker corner and dart board. There is also a balcony on the back side to the backyard. Minifigures Young couple play a game of pool Office worker playing a game of darts Student can't keep his hands off gambling Housewife practices her passion at the poker table Professional poker player Level 3 – Live Music The third floor features a stage for live music, a small bar and a second full-featured restroom. Minifigures Punk who also loves Rock'n'Roll Aging hippie Piano player Elvis imitator and musician Groupie Barmaid Businessman enjoys a cool pint Champagne connoisseur and music lover Level 4 – Rooftop Party The last level offers space for a roof top party with a sitting corner under the overgrown pergola, bar tables, barbecue and DJ. Minifigures Man enjoying the delicious Hotdogs Barbecue chef Security DJane Female dancer Boyfriend of the female dancer Bestfriends start the evening with prosecco Celebrity couple Cab / Taxi Last but not least, the MOC offers a Classic London Cab heavily influenced by the "TFL Classic London Cab Taxi" from bamsham363 Minifigures Businessman treats himself to a pint Taxi driver Thanks very much for reading and I hope you like my first MOC. There are more pictures on Bricksafe and feel free to support my MOC on Rebrickable and let me know what you think. At the moment I am building my MOC with real Lego bricks. As soon as possible I will post any photos of the real lego building.
-
I've, for some time, been making modular buildings. But I feel they haven't ever been posted as a whole, so I thought, why not do it. I'll try to give to background information and all. This might be updated if I create more! Hope you enjoy! My Flickr, just in case!!: https://www.flickr.com/photos/138575523@N07/ 1. Magic Shop Magic Shop was my very first trial at a modular building, believe it or not. If you take a closer look, the first floor could be the base for any other building above, that's because I had no idea what to build on top of that first floor. About a month later, (while in Ikea for some reason) I remembered a trip to the Black Forest, Germany and all its houses, and that's the result. This Magic Shop is absolutely perfect and that's what I love about it. In my first attempt, I nailed shape, proportions and colour. And that triangular roof is incredibly iconic. Such a wonderful modular! Eurobricks Topic: Building Period: Nov 2015 - Jan 2016 Pieces: 2598 on a 32x32 baseplate 2. Italian Villa Oh, god this one's exciting! The Italian Villa (or better said: The Tuscan Villa - that doesn't sound as catchy, does it?) is an ode to the highly underused Flame Yellow colour. The design for this beast mostly comes from a scale model of a Vineyard Villa I own - shape and colourwise, but the detailing and the whole rooftop is absolutely original and wonderful. As a fact, I had this design stopped for some weeks as I didn't know how to make the windows on the middle floor right. While visiting a univeristy campus, I found the solution! This has to be one of my two favourite modular buildings of mine, as a funny note, on a Chinese Lego enthusiasts fan page they marked it as Spanish Villa. As I am techinically from Spain I found this rather funny. And Unikitty's tail in white at the roof! Eurobricks Topic: Building Period: Jan 2016 - Feb 2016 Pieces: 2148 on a 32x32 baseplate 3. The Iron Horse My dear Iron Horse... I totally adore this modular. After two highly-successful modulars, this had to at least match the others' quality. Not only I think I managed it, but I also created (again) a very unique modular. By the time I designed this thing, I had all the tools and techniques mastered (no weird bricks showing and all) and I could make this trully the result of my imagination. Although its name and basic structure comes from a restaurant in PortAventura theme park, I translated it to Lego and made the façade even more striking than it was in real life. I also took Brick Bank's colour scheme and exploited it at the max. Not many people know this, at the porch's roofline there are rollerskates used in sand green. A detail I've kept for myself for a long time. Eurobricks Topic: Building Period: Mar 2016 - May 2016 Pieces: 1886 on a 32x32 baseplate 4. Old Ben's Gallery Old Ben's Gallery, the Lego version of Barcelona's Casa Amatller and Casa Batlló is my most bizarre approach to a modular. I tried to make the best of Pet Shop's concept, and this was the result. Although a great looking modular without a doubt, it still is my least favourite of them all, there's so much competition though! This was my first trial at making custom printed pieces for completing totally the façade. This was also my first attempt at making smaller windows with porticos, if you look closer at my previous modulars, they all have insanely huge windows. It's good for a change! Eurobricks Topic: Building Period: Aug 2016 - Nov 2016 Pieces: 3148 on two 16x16 baseplates 5. Sweets & Co. Oh my!! This absolutely beautiful 45-degree corner modular is the favourite of mine. So many nice shapes, nice colours, nice piece usages. You can tell I adore this thing, don't you? The idea of a 45-degree building came from seeing the corner buildings in Barcelona, where two houses share the corner. The one on the left is inspired by Casa Batlló's patio (see that gradient going up in Aqua against Royal Blue background, so cool right!?) The building on the right went under four rebuilds. Initially is was supposed to be Venice's Palazzo Ducale. When I noticed it didn't fit, I built a white thingy which looked terrible. Next some sort of castle-like thingy, also terrible (thanks brother for pointing out is was terrible!). And finally I created this pattern, so good! Btw, yes, on the pattern the darker blue is the sorta discontinued Dark Turquoise <-Outdated!, why not!? On this modular, I snuck some nice part usages, for instance, Indy's whip as dragon tail on the right door's wrought iron fence. Also the dragon head is a discontinued piece from 2003 which only found its way in some Orient Expedition and Knights' Knigdom II sets! Btw, that fence is in copper, also a discontinued colour. I also got to experiment a lot with rooflines on this bad boy. The one on the right is directly inspired by Venice's Palazzo Ducale, a reference to what the building was supposed to be! I would love to build this thing one day, but you know it's hardly impossible with all the discontinued colours and non-exisiting parts in certain colours. Eurobricks Topic: Building Period: Jan 2017 - Mar 2017 Pieces: 2994 on a 32x32 baseplate 6. Piazza San Marco Once I finished Sweets & Co., I went on a trip to Italy and one of the stops was Venice. The fact that I couldn't turn the Palazzo Ducale into a modular was still rattling my mind, so I set to build the most faithful recreation of the Campanile and the Palazzo in the modular form. Said and done. This is a huge over-the-top crazy piece of architecture. In fact the tower of the Campanile is 76'8 cm or 30' 2" tall! About the same as the Disney Castle for comparision. Although not my favourite modular it definetely is one of the dearest to my heart. All the details throughout the porch (something I'd wanted to revisit since I finished The Iron Horse, but with arches) are absolutely wonderful, in fact each capital is different from the other. As a reference to the original Italian Villa, the section inside the porch is Cool Yellow. Although hard to see in this picture, the whole façade is covered in a printed pattern (best seen in the section in-between the tower and the palace). Btw, two Sand Green gold ingots are there representing marble, so cool! The rooftop details are incredibly fun to build, surprisingly, and these were the best to build! Eurobricks Topic: Building Period: Apr 2017 - May 2017 Pieces: 3700 on a 16x32 and a 32x32 baseplate (same as Assembly Square) 7. A Summer in Tuscany Summer holidays are long, the desire to build a model are high. But what? Something daring, interesting, but with a warm feel to it (the heat was striking hard then!). Heck, I like italian architecture (easy to say... erm... out of eight models, three are entirely dedicated to the country ). So off I went trying to build something in the lines of Assembly Square (that year's modular), but closer to my heart, and let's be honest, less of a mix-match. The model came together pretty quickly, but then DISASTER! While rendering, my computer stopped, and dumb me had not made a copy of the file! Summer was long gone then, but the high spirit made me plough on to finally have it all wrapped up by Februrary of 2018. Having to do the modular all over again obviously means I had extra time to snuck details even the most eagle-observers fans won't find. Has any of you seen a little statuette representing one of those little virigins on the streets? I bet not! (Checks if it's actually there in any of the pictures). Yes. Eurobricks Topic: Building Period: Aug 2017 - Feb 2018 Pieces: 4434 on a 16x32 and a 32x32 baseplate (same as Assembly Square) 8. Klee Corner Klee Corner! Pop! A collage of hundreds of different buildings glued together by the man behind the keys (yup, me). If The Iron Horse was a result of my imagination over two years ago, this is me jumbling up together Berlin, Hundertwasser, Bilbao, Gaudí and the postmodern architects with him and U2. Can you turn music into architecture? Ermmm... Sure! No official 32x32 modular has ever had three buildings. Did that stop me? No. No official modular has ever had a curved façade. Did that stop me? Of course not! As a fun fact, I messed up the colouring of one brick of the model and realised the issue after rendering. I edited and covered it up in Photoshop. Can you even spot it? Very difficult, btw! Eurobricks Topic: Building Period: Feb 2018 - May 2018 Pieces: 4481 on a 32x32 baseplate 9. Disco 2000 Vinyl Store It had never occurred to me that I hated how a model I made looked. After some hours of working on it, it would look wrong. This happened again and again and again. This was because the image in my mind of the final product kept on changing, an extremely dangerous thing to happen. I'm not sure if it's better than my two previous corner models, The Iron Horse and Sweets & Co., but I'm really happy that I managed to make three unique buildings (getting really tough after nine models and thirteen from Lego!) look awesome. I used some awesome colour combos, dark red and sand green; white, yellow and blue which are surprisingly unique. As for techniques, Disco 2000 is by a long shot the most complex model I've built. I have a library of techniques I might use (especially for cornices) and there's still many on the waiting list; one has been waiting for over half a year (didn't fit neither in KC nor in D2000) and I'm dying to use in a model. At least I have an exuse to start a new one Eurobricks Topic: Building Period: Apr 2018 - Sep 2018 Pieces: 3743 on a 32x32 baseplate 10. Baseplate Alley The lack of physical time to build this model (it took me over a year to complete fully) was on one hand frustrating but at the same time inspiring. I have a visual dictionary in my mind of concepts and ideas I like and want to try out; one that was fed slowly but surely all those days without building. In the meantime, I discovered many inspiring designs and my inspiration became rougher, broader. Both a Rothko and Art Nouveau cornices would sit next to the sausage Lego piece as things I wanted to find a way for in in this model. I struggled quite a bit trying to find the layout of the building. The idea of the two angular façades poking out came to me in a Basque town near Bilbao. I already had the one in the right in place and was finding it hard to complete the model. I tried curved designs, not dissimilar to those in Klee Corner of Disco 2000 but just seemed to make the already-complete right building worse. It was around then that I realised I could use what I now call the "School of Athens" effect (surely other people call it different things). I could duplicate the existing design, keep the structure and change the details and colours. The same thing goes for Raphael's School of Athens: it's structurally symmetric (the architecture and the patterns on the floor marble are so) but the figures and the details on the façades differ. That's where the building on the left came from. You can see the different details differ between both façades. I'm very passionate about colour. I find it fascinating how two or more colours can transform one another to create strakingly different effects. Matisse is undobtedly a (or the) big name in the history of colour in art. His daring colour choices are extremely appealing to me. The orange-on-blue colour scheme is one I had wanted to use for a while and I'm glad that I found its home here; and on my tenth finished modular, something super special! Side note: when I began with Magic Shop in November of 2015 (jeez, 4 years ago) I thought I would completely run out of ideas before ariving here. Truth is, I've become a much more cultured man in the process of coming to where I am and all that knowledge I now have is what has allowed me not only to keep going but to bring real innovation to the table. I feel like I'm breaking new ground with every model. Ideas that I hope you'll want to further explore yourselves. I most of the times work from what my gut induces me to work in. I find it particularly interesting that thanks to this odd "mental visual dictionary", I barely look up actual architecture for inspiration. Most of what is shown here is a mix of the real-world architecture knowledge I've acquired over time and other arts: painting, filmmaking and music, among others. It's hard to explain; it feels like I'm building a façade I'm reminiscent of while looking at the building from a Fauvist point of veiw, for instance. Weird, I know. Anyway, I feel like I'm guided by something bizarre when designing. The eyes of experience, I guess. Eurobricks Topic: Building Period: Sep 2018 - Sep 2019 Pieces: 3581 on a 32x32 baseplate Why Am I Writing This? I've always wanted to have my modulars be seen as a unit, as something that one builds upon the other. They're on a Flickr album all together, but I want to use this space as more of a personal diary of what makes a design of mine come to life. Hope to hear from you guys! Leave your comments, please note this is the work of almost 4 years, so take this into consideration! Thanks!! Pau
-
Well, after a long period of not doing much besides the giant Eleitian Central Command model, I present to you my newest model, The Cliffside Villa! The idea came about last Sunday, I was procrastinating on doing stuff I was supposed to, as one does. I decided to expand on the bridge, which I had been building as a standalone concept but couldn't figure out what to do with. I was going to build a fairytale castle on the cliffs that I eventually made behind the bridge, but then it morphed into an entirely different building altogether! The porches, stained glass window, and other elements of the actual pavilion came about next, after I'd laid the groundwork (literally) in the form of the cliffs. I then decided to make it into a combination of my previous Temple of the Moon Maiden MOC and something more open to interpretation. So it could be used, (it sits on a baseplate totaling 32 x 48) as an addition to a modular city! Perhaps a large city park with a pavilion, or some form of garden! From my official description: It's a fine spring day at the Cliffside Villa! The Moon Priest contemplates the deep questions of life on the porch, while his daughter strolls the elegantly appointed walkways of the garden. Two guards stand sentry by the staircase, protecting the inhabitants of the Villa from harm. Explore all the secret nooks and crannies of this large set, from the bell tower to the fish pond to the stained glass window behind which the statue of the Moon Maiden is placed! Set features: - 2568 Pieces - 7 Minifigures: The Moon Priest, Moon Priest's Daughter, Statue of the Moon Maiden, (2) Garden Statues, (2) Guards - Villa features a large stained glass window, metallic Statue of the Moon Maiden on a raised pedestal, and two spacious porches. Upper story features a movable bell! - Elegant bridge crosses a large frog pond filled with lily pads and other aquatic plants. See if you can spot the frogs hiding down there! - Statuary adorns the garden, which is built onto the cliffs with beautiful brick-built birch and cherry trees in full bloom. - Relax on the small bench set below one of the statues! - Features multiple unique pieces, such as the Ornamental gold fish adorning the roof, the Moon Priest's staff, and much more! - Spacious basement level beneath the Villa is perfect for placing hidden treasure or whatever you need for added suspense! But don't just follow that one story for this model, use your imagination to make it your own! This model, on baseplates totaling 32 x 48, can be placed as a standalone model or a complementary model for your modular city! Use it as a pavilion, a city park, or a historical monument in your LEGO town. This MOC is now on LEGO Ideas! If you want to, please help support it, I'd love for it to be one of the lucky few that makes it! The Cliffside Villa: https://ideas.lego.com/projects/4bfda07a-beb1-440e-bcfe-d9742e9d3746 Feel free to leave any comments below, and keep on building, everyone! :)
-
I started this a little into the new year and let me say the good thing about a building site MOC is it doesn't have to look finished to be so. Woohoo! I realised then that I had never made a building site MOC which seemed a dereliction of duty considering building buildings is what us AFOLs do right? Being firmly stuck in the past when it comes to LEGO dimensions (the mathematical measurement method, not the game console games) I like to build 4-wide vehicles and so generally build buildings to a slightly smaller height than is common these days. Way back in 2007 or thereabouts I picked up the Tower Crane set (#7905). Looked great on the box but to be kind to it it looked terrible when included into my city at the time (like the Eiffel Tower did). Size of course was the big problem, too high and too wide, detraction. Conscious that the scale needed to fit be appropriate to the style of my city and also that the road needed to connect to another road the building site area was quite restrictive at 24x34 studs. This made it a little tricky to fit in everything (actually I didn't include any external scaffolding or portable cabin as a result of having no space to put it but in the end I added a further 16x48 baseplates to accommodate the roofed hoarding and side lane) but I find the restrictions made the build overall more enjoyable as there a little challenges here and there. The tower crane is 5x5 studs which itself introduces a few problems mainly related to the attachment of the ladders and boom. Two counterweights for the boom are used, one the official weight black brick but seeing that in reality you usually see grey concrete slabs (or things that look like concrete slabs) being used I tried to replicate this look. The big problem here was the simple fact that my counterweights combined were not heavy enough to support the boom with any significant load. So off I went to raid the tool box and filled a revised hollowed counterweight with nails (see here). Speaking of booms, the builders built this in record time to cash in before the next crash. Hope you Town fans and 4-wide loyalists out there like this build. Happy to hear people's thoughts or comments on it! I will look to replace these waste shoots with a white or another colour version at some point, just to add a splash of colour, not that too much LBG is bad or anything. Would like the 1x1x2 cylinders used for the streetlights not to have cutouts. Got the calculator out and the office area is accurate. Made a little microscale version of the 'finished building' for this billboard. The construction company logo is the jumping frogs. Maybe because they jumped legal hoops to avoid being prosecuted on health and safety grounds? Finally can get that Welder to work! Also you can look down the dry riser. Someones's not happy. Fact. All tower crane operators end up with glasses due to eye strain despite in cabin cameras. Just made that up.. The view from above. Please make sure your figs are not afraid of heights before looking down.
-
Hi everyone I'd like to share with you my second MOC which I have been working on over the past few weeks. For this project I decided to tackle a subject very close to my heart - the Great British Pub! So without further ado... Grab yourself a pint and join me for a guided tour of The Queen Bricktoria! As you can see this is a modular style corner building with 3 floors built on a 32x32 base plate. The design is intended to be reminiscent of British town centre pubs or more specifically the style of pubs we'd see in London. The Minifigures There are 7 minifigs with the model. The 3 characters below are the pub workers. From left to right we have the Owner/Landlord and his daughter the barmaid. The guy with the guitar is a local singer who has been booked to play a gig at the pub. The 4 figures below are the pub regulars. The guy with the beard is the typical sort of old gent we find in many pubs propping up the bar and boring everyone to death with their stories of the good old days. The guy in the green top and the girl are boyfriend and girlfriend. Level 1 - The Bar Outside the building we have a busy street corner. I've included an iconic British red phone box and an outside covered seating area. There is also a sign board advertising events etc at the pub. The main entrance leads us in to the bar/lounge area. Inside we have a well stocked bar and a cozy fireplace. There are also tables and bar stool for the minifigs to sit and enjoy their drinks. Brown carrots make pretty good beer pump handles. At the back of the bar is a staircase leading us up to level 2. Level 2 - Pool and Darts Room On the second level is a games room featuring a Pool table and Dart board. There is also a pool cue rack and a shelf with trophies won by the resident darts team. At the back of the room is another staircase that leads to level 3. Level 3 - Live Music Room Level 3 has a stage for Live Music gigs and Karaoke. On the stage we have a keyboard, guitar, amps and microphone. Also on this level is more seating for the minifigs and a door that leads to a small balcony seating area. Oh dear!!! The singer seems to be a bit of a hit with the ladies. The Finished Model Here is a picture of the Queen Bricktoria next to my first MOC design, The Convenience store, as you can see my new MOC is much much bigger. Another picture below shows the pub next to one of the official modulars, to help give a sense of the size of the model. Thanks very much for reading and I hope you like my newest MOC. There are more pictures of it on my Flickr page so feel free to check them out and let me know what you think.
-
Head to Baseplate Alley and have a blast! Here it is finally, my tenth modular building! Almost a full year after my previous (Disco 2000 Vinyl Store), I’ve put together enough ideas to fill a whole 32x32 baseplate. Architecturally, I believe this is my most complete model. The designs throughout are not only daring but also well-balanced and complement one another, something I used to struggle quite a bit with. Both buildings are almost identical in shape and proportions and vary in details and colours. In fact, originally there only was one building: the striped one on the right. I loved it so much, but I was struggling to find something that would complement it well. In the end, I thought. “If I love how this turned out, why not repeat the already existing motifs to create a grander picture?” (almost like you would in a song; the chorus and the melodies are often repeated various times). The building on the left is my favourite of the two. The orange and bright blue colour scheme of the model is taken from Henri Matisse’s “The Dance” painting and I think it looks marvellous. Both buildings sit on a rather peculiar angle. I was looking for a way to offset the model from the usual 90-degree grid and found that two of the piece 54384 (https://brickset.com/parts/design-54384) turned at about 20 degrees filled about 12.5 studs and that allowed me to build an angled façade without any seams! Duplicating that didn’t solve the slight error, but some handy trickery helped hiding it. The rest of the model is completed with Medium Nougat façades on top of a Sand Green ground floor. I especially like how the windows in Sand Green (inspiration from my own previous model) work with the façade with yellow windows on the side. My favourite bit to build of modular are cornices and rooflines; it’s quite amazing how they can transform the look of a building. The one for the striped building is one that I’ve wanted to put on a model for a really long time; I think it’s really elegant and that it suits the building nicely (I’ve had it built for roughly a year and a half). The one for the blue building is a brand-new design especially designed to both enhance the other building (this one’s set slightly further back in some areas) and make the blue building have an almost castle feeling. The roofline for the nougat part is the minimum expression of the same concept of the white roofline. Using the new arches from the large Hogwarts Castle and the 1x1 bow pieces also found to top off the black box on the ground floor of the blue building, I’ve created this wave design. It’s rather simple to be honest, only impossible for a very long time. ================== Interiors: Interiors have never been my biggest strength, but I’ve put extra effort to make them really pop in this model (it’s my tenth, I should start getting better, shouldn’t I? ). The nature of the façade makes this modular way more modular than any of my previous models. Both top floors detach into three parts, one for each façade and one for the actual interior. This was not intentional but makes this model way more playable. Beyond that, I’ve also added an open ventilation shaft to add more interest to the interior and more light to all the rooms. Here’s a 3D view of the model with all its sections: https://www.mecabricks.com/en/models/Geje68pxvKX. 1. Ground floor: On the ground floor are two art galleries. They have interpretations of real-life works (I will admit that some of them are not particularly easy to identify), but you can find a Picasso, a Manet, a Botticelli, a Mondrian and a Matisse. I bet you’ll see the last one. They’re telling me that Matisse himself has decorated the façade of the left building using the colours from the piece he’s presenting here… Who knows, maybe it’s the art gallery that is running low on cash! I really like how this rendering turned out, it really tells a story. 2. Middle floor: Both the top floors are dedicated to the publisher of the ABS-famous newspaper “Stud Times”. Today’s edition is a packed one! The Iron Horse is closing because of chef Emma’s death, the celebrity detective Ace Brickman is seen eating in Jim’s Diner rather than at the usual Chez Albert, news about battered leg assemblies and even a front cover advert of face transplants! On the middle floor we have the machine printing out the newspapers with all the needed tools and equipment. There’s also a hidden little play feature, there’s a little rotating crank for extra movement (it doesn’t actually do anything). And before you say it, yes, the windows on the back are copied from Downtown Diner. 3. Top floor: Piles and piles of newspapers, typewriters (the design is the same one @Bricked1980 used in his Police Station), four clocks to check what time it is in the various parts of the globe, phones, coffee mugs to swallow the sweat, a fax machine and, of course, a paper bin to throw away texts with mistakes! ================== To see everything that I haven’t been able to explain in words, feel free to take a look at the model yourselves, many of the “how was this/that made” are visible! From here I encourage all the digital builders to upload their models to Mecabricks, there's hardly anything more enriching as a builder than seeing how others are building! 3D view of the model: https://www.mecabricks.com/en/models/Lkj9DgqB2Ap 3D view of the interiors (+ how the façades are built) https://www.mecabricks.com/en/models/Geje68pxvKX =================== Thanks for reading through and hope you like the model! PD: Please, could you comment on the various things I've changed in presentation. Mainly rendering engine and format of the image (now a squarer 3300x2550 format rather than the wider 3840x2160 format). Please say someone got thejokes in the newspaper
-
Hi, I'm new here and still trying to figure this all out! I wanted to post pictures of my project but only very low resolutions can post here. I am linking my Lego Ideas page and Flickr for better images. Flickr Photosteam Lego Ideas Project Page
-
Hi everybody, After a long period of works at my home (swimming pool and rehabilitation of a barn...), i found a bit of time to make a little MOC. So this is a building with a leonidas store and chocolate bar, it's one of the best brand of belgian chocolate (i had a lot of brown bricks to use). You have also an architect office and a loft on the third floor. Enjoy Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr Leonidas store by Jean Macou, sur Flickr
-
Building Desk And Storage Shelves [Now Finished]
MxWinters posted a topic in General LEGO Discussion
The other day I posted a reply to the Stroage and Sorting LEGO thread showing my plans for a building desk and storage shelves for my LEGO collection. Considering that this is a big DIY project I thought I post a seperate topic showing my progress. Incase you didn't see my post in the other topic and due to some of the details in my other post having changed from my original plans, I figured I would repost the updated details in this thread. The desk will be made from 18mm plywood and will be 1650mm long, 533mm wide and 660mm high. The shelving will be made from 12mm ply and will have 28 shelves, each shelf will be 801mm long and 150mm wide. Total height of desk and shelving unit will be 2262mm. I am also going to build a wall unit to give me extra shelves which will be 825mm long, 150mm wide and 1120mm high. The main shelving unit on the desk will hold 168 plastic food containers and the wall unit will hold another 60 containers giving a total of 228. Each shelf on the desk and wall unit will be angled at roughly 15° and they have an edging strip to stop the containers sliding out. I have added a piece of offcut in the centre of the desk shelving unit at the top that sticks out to fit a worklight as this unit will be in the corner of my living room which isn't that well lite. My Dad had a spare LED batten light fixture that will be screwed to this bracket. I have also added a L-shaped section under the desk for my 1x1 storage bricks that I have all my Power Functions stuff in. This image shows the SketchUp drawing of what I'm building. Ignore the different coloured textures in this image, I have coloured them like this as the SketchUp file also contains a cutting plan of each sheet and the different colours help me to know which part is what. The desk, shelves and wall unit will be painted gloss white to match my computer and electronics desks. The image shows part of my LEGO collection stored in plastic food containers which will be placed on the shelves and wall unit. Still have loads of parts that still need sorting as you can see to the right of the photo. Hope you don't mind me creating a new topic but this is a big DIY job and I felt it should have it's own thread. Plenty more updates to come. -
Hello Eurobricks! Today I present you the review of an unusual, very playable and exciting old LEGO set - the Aero Tube Hangar. 01 by Farseer Eldar, on Flickr Set Name: Aero Tube Hangar Set Number: 7317 Year of Release: 2001 Number of Pieces: 706 Number of Minifigures: 5 (all Martian) Price: $ 90.00 ($ 0.13 per brick) Life on Mars was a short-lived, but interesting LEGO Space theme. It explored the world of Martians, who are surprisingly friendly to human astronauts, which is rather unusual for LEGO and science fiction in general. The Aero Tube Hangar is the main base of the Martians. It was the dream of my childhood, but I got this set only in 2013, when I was already an AFOL. So, let's get started. Box The main box is large, what fits this set. The front side depicts the Aero Tube Hangar in all its glory: 02 by Farseer Eldar, on Flickr On the back side the functions of the set are shown: 03 by Farseer Eldar, on Flickr Old-type boxes with flip covers are great for storage: Box by Farseer Eldar, on Flickr Different parts of the set were sorted into three additional boxes which are not cool as the main one, but useful: 04 by Farseer Eldar, on Flickr Instruction Booklet The instructions start with the same image as seen on the box: 05 by Farseer Eldar, on Flickr Next there are the minifigures (note the misspelling of Arcturus) and the hypersleds with a warning: 06 by Farseer Eldar, on Flickr The first model to assemble is the mech: 07 by Farseer Eldar, on Flickr Note that this is an old instruction, and there is no list of required parts on each step. The last pages show how to connect the tubes and how to use them and some ads (I will put them under a spoiler): This set also has a small advertising booklet: 13 by Farseer Eldar, on Flickr There are sets from other series on another side: 14 by Farseer Eldar, on Flickr Unfortunately, almost all that themes (Alpha Team, Studios and LoM itself) didn't live to this day. Only Star Wars do. Minifigures This set includes five minifigures. All of them are Martians, and there are no humans: 15 by Farseer Eldar, on Flickr These Martians are, very much like Blacks from Harry Potter, named after different stars and constellations. Perhaps their names sound differently in Martian language, and here the human equivalents are given. Riegel (note the misspelling - the star is called Rigel) is the leader of Martian people and the general of the Aero Tube Hangar. He does not like laziness and disorder. His favourite food is space slugs. Unlike other Martians, he has a different skin tone and wears some sign (maybe honorific) on his chest. Cassiopeia is the daughter of Riegel. She does not look like her father, but very likely looks like her mother. Later she visited Earth with the austronauts. Mizar is a Martian technician. He wears something like a gas mask. Vega is a scientist who specializes in excavation. He likes sandwiches. Arcturus is a spy from another tribe of Martians which tries to still energy-rich biodium ore from the Hangar. In 1930s he was the leader of Martians, and his invasion of Earth and subsequent defeat were described by Orson Welles. All these figures are exclusive except Vega (who also appeared in 7316, 1195 and 7320) and Mizar (who also appeared in 7321). The Martians have the same bodies and hands with Trade Federation battle droids: 16 by Farseer Eldar, on Flickr Except they are sturdier due to different legs and (in my case) shorter use. The Martians move through the aero tubes using hypersleds molded especially for them: 17 by Farseer Eldar, on Flickr The white hypersled glows in the dark. Mech This small mech is used for scouting and defense: 47 by Farseer Eldar, on Flickr The mech's limbs are very mobile, which is rather good for early LEGO walkers: 48 by Farseer Eldar, on Flickr The only flaw is the lack of knee joints: 49 by Farseer Eldar, on Flickr The right hand holds a cannon to repel enemies, and the left hand has a hook to lift meteorites: 50 by Farseer Eldar, on Flickr The cockpit is open and has a holder for a Martian pilot, and a printed control panel: 51 by Farseer Eldar, on Flickr Flyer Another vehicle in this set is a flyer (or convertiplane, to be precise). It looks similar to Scorpion from James Cameron's Avatar and Banshee from Starcraft II. 55 by Farseer Eldar, on Flickr The propeller engines rotate freely: 53 by Farseer Eldar, on Flickr The pilot is interestingly attached to the cockpit - only their arm is attached to a lever which is connected to one of the flyer's cannons: 52 by Farseer Eldar, on Flickr Transportation Now it's the time to review the most noteworthy feature of this set. The Martians can be transported through aero tubes using this pump: 42 by Farseer Eldar, on Flickr The pump is one very big part with some adjustments. It looks like some futuristic storage house or power plant. The black upper part, which is made of rubber, can be rotated to shange the direction of air flow. The aero tubes are flexible, transparent and not perfectly round. They should be plugged into purple solid connectors very tightly, so they will be disconnected with a click: 43 by Farseer Eldar, on Flickr This system was used again in two sets from Mars Mission line (7690 and 7691), but there the tubes were orange and human-built. And the aliens were hostile and didn't come from Mars, so this was a completely different theme. Unfortunately, humans (or other non-Martian minifigures) cannot ride or even get into the tubes - their arms are too large: 44 by Farseer Eldar, on Flickr Mizar needs to get to the red mech bay. He lies in a hypersled at the main station: 18 by Farseer Eldar, on Flickr To suck him into the tube, we should rotate the upper part of the pump counterclockwise until it stops and then squeeze it: 19 by Farseer Eldar, on Flickr Now the Martian can be seen within the tube: 20 by Farseer Eldar, on Flickr Then, we remove a stopper and place the tube in the required direction using gears and the steering wheel: 21 by Farseer Eldar, on Flickr 22 by Farseer Eldar, on Flickr There is another fork on Mizar's way, and here we also should set a course by moving the tubes: 23 by Farseer Eldar, on Flickr The stopper is removed: 24 by Farseer Eldar, on Flickr And then the tube can be moved on rails: 25 by Farseer Eldar, on Flickr The drawback of this process is that the supports are constantly shifting and can hang in air. Next we rotate the pump clockwise and slam it. Now the air pushes the hypersled from the rube, and Mizar rides to his destination. 26 by Farseer Eldar, on Flickr 27 by Farseer Eldar, on Flickr That's it! Mizar has arrived and is ready to work! 28 by Farseer Eldar, on Flickr 29 by Farseer Eldar, on Flickr Now Riegel must lead an excavation expedition, and he prepares to depart: 30 by Farseer Eldar, on Flickr But wait... He is stuck within the tube - probably due to his medal: 31 by Farseer Eldar, on Flickr In reality there is nothing to do with the medal. Sometimes Martians get stuck in tubes and cannot be launched. Nevertheless, the construction is made very soundly. We turn the pump counterclockwise, suck Riegel into the tube and place it to the left side: 32 by Farseer Eldar, on Flickr Next we turn the pump clockwise, push the Martian ruler forward, and he is now ready to lead the expedition: 33 by Farseer Eldar, on Flickr Buildings Let's take a closer look at the hangar buildings. Here is the biggest one: 34 by Farseer Eldar, on Flickr The "umbrellas" with tools and control panels are attached to the sides via bridges: 35 by Farseer Eldar, on Flickr At the top there is a tower from which Riegel oversees his domain: 36 by Farseer Eldar, on Flickr The flyer can be hung on axles: 54 by Farseer Eldar, on Flickr The tower holds a turning crane which is used to put meteorites to the site for further dissection and processing: 37 by Farseer Eldar, on Flickr This meteorite contains biodium - a substance used by Martians as energy source. They collect meteorites especially to obtain biodium: 38 by Farseer Eldar, on Flickr One purple "umbrella" (or "mushroom" if you like it more) has some control panels: 39 by Farseer Eldar, on Flickr These Martians should be really cold resistant - they walk bare-handed and bare-headed in the open air at -50 degrees Celsius (or -58 Fahrenheit). Under the second "umbrella" they store their equipment, which unfortunately does not suit their hands at all: 40 by Farseer Eldar, on Flickr 41 by Farseer Eldar, on Flickr Walkie-talkies (there are two of them!) and circular saws are common, but the grey wrench is a valuable acquisition. The aero tubes lead to mech bays: 45 by Farseer Eldar, on Flickr Each is painted in colors of different Martian mechs. The blue one corresponds to the heavily weaponized Red Planet Protector (7313), and the pinkish-red one - to the Recon Mech RP (7314). The light-grey studs are used to connect the mechs. It should be noted that the entire Life on Mars theme is rich in colors and non-standard parts. It had the first appearances of rare "sand" colors, such as sand purple, sand red, sand green and sand blue. Unfortunately, only two last colors are still produced nowadays. The bays can be disconnected from the tube ports: 46 by Farseer Eldar, on Flickr This set has only two bays, but three ports. The third port is supposed to be connected with a tan bay coming in 7316 - the Excavation Searcher. In conclusion, I will show the extra parts of the set: differently colored droid arms (both Martian and mechanic), another Riegel's medal and transparent studs: 56 by Farseer Eldar, on Flickr Pros/Cons Pros: + Tubes + Tubes + TUBES!!! + Rare colors + Non-standard parts + Martians + Mech and flyer + No stickers! Cons: - Martians sometimes get stuck in tubes - Supports not always stand firm - Tubes are not compatible with traditional minifigures - Primitive build - Not so many Martians - No humans Thank you for reading! And what can you say about this set?
-
This is render of a commissioned model I am working on. 90% of the bricks are already ordered so building can soon start. The model has about 50k bricks and is 2m75 x 1 m in size
-
Hello! So, I am starting to create a realistic LEGO City Layout, based off of metropolutan areas like New York City or Hong Kong. I want to have billboards in my city to add the feel of Corporate America and commercialism in my city (which are defining features of cities like NYC). I abhor stickers, because I would rather have a brick-built sign than a sticker (I reserve stickers for things you can't build, like a menu sign within a building). Any tips on making realistic brick-built billboards? I see all these cool images online, many of whom use SNOT, but I don't know how they specifically built it. I am quite new to MOC building in general, so I appreciate any and all help! Thanks
-
This MOC is my representation of the Motorbike of the "Classic" Ghost Rider (Johnny Blaze and Dan Ketch) from The Marvel Univers. It's inspired by "the Spirit of vengeance" of the terrific builder called Ben Cossy on flickr and MOCS based on the LEGO Marvel video games. The MOC has 111 pieces... X6 and it's the devil's number ! The Showcase video is online on YouTube and the Building Instructions are available on Rebrickable ! The Building Instruction is a PDF file : https://rebrickable.com/mocs/MOC-25824/BricksFeeder/ghost-riders-motorbike/#comments More shots below : I hope you enjoy the build! Let me know what you think about ! If you have some remark or problem with the instructions, let me know and I will correct. Don’t hesitate if you have questions!Moreover, could you post pictures of yours when you finish to build it and write a comment below please? Thanks ! :)
-
Hey guys, I’m searching MOC instructions and LDD files for my near-future huge Lego city. I plan of course doing some MOC modulars but there are some very nice MOCs created by other people! I made a list of all the designers I found, I hope that list helps some other people who search modular instructions! Here are the MOCers with instructions that are definitely worth looking at (with no particular order): —Brick Ative (by @lookl and @Pakita) ebay Rebrickable —SteBrick (by @stef2280) Bricklink Stebrick Rebrickable —Snaillad (instructions on sale by @2013-lego) (by @snaillad) ebay Rebrickable —Sheo (by @sheo) Rebrickable —peedeejay (by @peedeejay) ebay Rebrickable —bricksandtiles (by @Giacinto Consiglio) ebay Rebrickable —Kristel (by @Kristel) Rebrickable —brickcitydepot (by @brickcitydepot) brickcitydepot ebay Amazon no starch press Barnes and Noble —Ryan Taggart (by @ryantaggart) snakebyte.dk LDD File of Construction Site –geo.gr (by @Gunman) ebay —BrickToyCo (by @Tobysan) BrickToyCo —hermez (by @hermez) Rebrickable —mestari (by @Mestari) Rebrickable —Huaojozu (by @Huaojozu) Rebrickable —2013-lego (by @2013-lego) (his own designed modulars) ebay Rebrickable —Duncaadkin0 (by @Dakar A) ebay —BrickBuildersPro (by @lgorlando) BrickBuildersPro ebay Amazon —The Brick Show Shop The Brick Show ebay —andrepsramos ebay TISMSTORE Rebrickable –Brickstruct Bricklink Brickstruct —10214 Alternative Build (by Garom) Rebrickable —The Magic House (by valgarise) Smart Bricks —Bob's Burgers (by jtam1608) ebay —Villa Maison (by @marcosbessa) (found the LDD file on LDD gallery as it’s no longer available in his own website): LDD File —Train Station (by @LegoWolf) (link to download the LDD file is on his Flickr): LDD File Here are some other ones (those which doesn't really interest me but I'm sure that will interest many others): —SkywardBrick Rebrickable —TheUniqueBrick TheUniqueBrick Rebrickable ebay —A *Deal* 4 U (by waltzking) Bricklink —Bricker and Co Bricker and Co ebay —Bjor Schoute ebay —sabriyo Sabriyo Customs ebay —Bauanleitungenmartin ebay —Berth Rebrickable —Soar Brick soarbrick ebay —gryffindorcommonroom ebay —scottcdavid ebay —sodabilly ebay —bolbuyk Rebrickable —deconstructor1 ebay —jval (Need for Brick) Bricklink Rebrickable —Fully Brick Models Bricklink —Brick Vice Bricklink Rebrickable —BrickusMaximus Bricklink —SonicSunday Rebrickable —Brickalive Rebrickable BlocK Shop —custombricks.de CUSTOMBRICKS Rebrickable —The Royal Church (by ateameric) Rebrickable —Alternative for Town Bridge (by Albertovax Corner) Bricklink —Bowling Alley (by drtyksh) ebay —Book Store (by Lair of Maedhros) Bricklink So that’s all I found. Maybe you wonder “why he’s asking for new instructions, he already found enough!” I ask it because I’m just purchasing/will just purchase the instructions in the categorie “must-have” . In LDD gallery, there are some interesting MOCs, you can download them too. I hope that list helps some people and some people helps me by recommending/finding more modular instructions/LDD files Cheers!
-
What are your favorite MOC genres to build within, admire others' work from, or aspire to hopefully build within in the near future if you'll ever have the opportunity? Whether they be based upon past or present preexisting themes, licenses, or product lines already covered by Lego (Star Wars, Classic Space, Ninjago, etc.), or perhaps they've never been truly touched upon by Lego (Steampunk, Post-Apocalyptic, Licensed Franchises never yet partnered with TLG, etc.), discuss your favorites here and share creations from those genres built by yourself or others.
