one23one23four

Eurobricks Vassals
  • Content count

    16
  • Joined

  • Last visited

About one23one23four

  1. This is another version of khatmorg's great design. I pretty much only changed the wings and when I was about to start ordering the parts I realized, that this brick is not available in dark red, so I had to change the way the wings connected to the body. This turned out to be more difficult than I thought and in the end I settled for some two studs connections with the idea that it will only be a display model and I could sacrifice durability. After receiving the parts I found a few more weaknesses and overall the transition between the wings and the body has too many gaps. I'm uploading the .lxf file and would greatly appreciate it if anybody could offer any suggestions how to improve the model. Thank you! D-7 Jedi Starfighter.lxf
  2. [Model MOC] T-47 Airspeeder (Snowspeeder)

    I think that if you use this slope instead it would be less steppy, but that would mean redesigning the whole wings and also I'm not sure if the angle would be right.
  3. The UCS Hype. What will 2017 bring? (40th Anniversary)

    Has the UCS Deathstar been officially confirmed for this autumn? I think I first read about it a few months ago, but have no idea from where did this information originate. How much time in advance do you think we'll know if there is going to be something special for the 40th anniversary?
  4. [MOC] Another AT-ST version 2

    Thank you for the heads up. I'll postpone bricklinking the parts I need. I don't know how I've missed the hose, but it does look great. The fact that you haven't used any illegal connections made me like the model even more when you first posted it.
  5. [MOC] Another AT-ST version 2

    anothergol, you've added some great finishing touches. I'm actually reluctant to modify my model because I was able to pose it just perfectly and don't want to mess with it, but probably will anyway. Can I just ask is the hose in the back of the head Hose, Flexible Ribbed with 8mm Ends? Does it connect anywhere, or did you just cut it and bend it in place? Thank you for updating the instructions!
  6. [MOD] Wing and landing gear for Kylo Ren's Command Shuttle

    I want to build a black shuttle at some point in the future and am wondering if it's worth it getting the original set and replacing the gray parts which are visible with black, or should I just bricklink it? Either way I'm going to have to do a lot of bricklinking, but if I get the set I'm also getting Kylo Ren. Any advice?
  7. [MOD] 9500 Sith Fury-class Interceptor

    And now my original set looks much worse. I hate it when that happens. Is it sturdy? Any chance of you doing an .LXF file?
  8. [MOC] Another AT-ST version 2

    I received the last few parts I needed a few days ago, but have built only the legs, due to lack of time. The only parts I chose not to order were the LBG Paint rollers because they are just too expensive. I'll get them when they appear in a new set and the price drops. I very much enjoyed building it so far and was impressed by the way you've designed the feet. I hope to be able to finish it tonight. Thank you again for posting the instructions!
  9. This is a great build! I like the D-7 Starfighter very much, but was disappointed by the official version. The UCS is nice, but I'd prefer a minifig scale model. Thank you for providing instructions! I was going to bricklink the parts, but after seeing this excellent model, and also this one I decided to try to modify it, so that it has brick build wings. I still like everything else, so kept it and just did some work on the wings. Would it be incredibly rude if I asked you for your opinion, after copying your design? I tried four or five different methods and was barely able to finish one of them, so would really appreciate some help.
  10. [MOD] Council of Elrond

    This is indeed an excellent model, but I'm afraid it is out of my creative reach. I do want to build a rock base, but for now I consider this project done and updating it is not at the top of my to do list. However I am curious how the floor in Alebricks version is made.
  11. [MOC] Another AT-ST version 2

    Could you please tell me if the part over the vents in the back is this one? I've managed to replace some of the parts with similar molds, which are more common, but this one seems to be unique and quite rare.
  12. [MOC] Another AT-ST version 2

    Thank you for clarifying! I was actually wondering about the hose on the top and thought the green parts were just parts, which aren't visible so the colour didn't matter.
  13. [MOC] Another AT-ST version 2

    Hello I'd like to bricklink your AT-ST could you please tell me does the LXF file have all the parts? I had to change some colours when exporting to brickling and a few parts seem quite rare and wanted to be sure I wouldn't need to paint or modify anything. Thank you for sharing your creation and letting people build it!
  14. [MOD] Council of Elrond

    A few years ago, when I had recently came out of my dark ages, I saw this very beautiful creation by Flickr user Paul Trach / Disco86. I wanted to build something similar, but to this day I'm not sure how to make some of the details, so I decided to aim lower. I already had the official Council of Elrond 79006 and I wanted to incorporate the arches and basically build a larger area where I could sit all the characters, who are present at the meeting in the book. At the time I wasn't aware of Eurobrick, or maybe had seen it but didn't know it had such a big community, but was somehow able to find this version on an image site. The rocks seemed the most difficult part to recreate and would also require many pieces, which I'd have to order, so I decided to just use @richchie's small buildings in Disco86's colour scheme. This was also my first big Bricklink project and I didn't know about Brickstock or Brickficiency, so as you can imagine it took quite a while to finish and was also quite expensive. I can't really say it's my design, but it's my version of a great set and two exceptional other people's creations. I've had it displayed for maybe three years, but have recently started thinking about replacing the tiles with sideways placed bricks, using some snot techniques, which I couldn't have imagined when I was first building it. There's usually a tree behind Elrond, but I wasn't pleased with it so removed it and took the opportunity to take some pictures without it in the way. I'm uploading the LDD file without the minifigs, because I don't know how to find the exact ones. Feel free to share your opinion and I would appreciate some ideas how to make a better tree. The one in the file is just a placeholder, but the real one wasn't much better. Council of Elrond MOD.lxf
  15. [MOD/MOC] Incom T-47 Snowspeeder

    LiLmeFromDaFuture I very much like the grille and I think your speeder would make a great display piece because of the excellent stand. The only thing which bothers me is the illegal connections. I might actually end up ordering all the parts for yours and also the ones I need to modify mine according to ScottishDave's version. I'm glad that the newly revealed sets were disappointing for me, because I'll be able to work on more detailed other people's creations. I would like to thank both ScottishDave and LiLmeFromDaFuture for posting the instructions files and thus enabling other people to enjoy and display such great builds. You should really consider accepting donations.