Search the Community
Showing results for tags 'Fire'.
-
A fire has broken out downtown. In the garage, under the apartment a fire started in a car. In no-time the entire garage on fire. The resident of the apartment was in the room above the garage. When he heard a noise in his garage. To his surprise, there was a fire. But it was to late, he was closed in. There wasn't a way out. He called the fire department. When the Fire department was at the scene, 2 firefighters went inside to rescue the trapped man. 2 other firefighters were extinguishing the garage fire. The fire could spread to the BrickBank and 2 other building. More crews arrived at the scene, they were used to prevent the fires from spreading to the other buildings. The man was saved by the fire department. The ambulance taked care or him. The fire department prevented the fires from spreading. *Note: Maby some things in the text are not corrrect, English is not my main language The garage fire with the apartment above. The ambulance take care of the man. The first engine on the scene. Firefighers getting in a building near the fire to check if it is spread. The brick bank has been evacuated. I hope you liked this MOC!
-
Hi guys, I'm new here, and I want to present my newest MOC: Pierce Arrow XT "Tiller Truck" in colors of San Jose Fire Department A tiller truck, also known as a tractor-drawn aerial, tiller ladder, or hook-and-ladder truck, is a specialized turntable ladder mounted on a semi-trailer truck. Unlike a commercial semi, the trailer and tractor are permanently combined and special tools are required to separate them. It has two drivers, with separate steering wheels for front and rear wheels. One of the main features of the tiller-truck is its enhanced maneuverability. The independent steering of the front and back wheels allow the tiller to make much sharper turns which is particularly helpful on narrow streets and apartment complexes with mazelike roads. An additional feature of the tiller-truck is that its overall length, over 50 feet (15 m) for most models, allows for additional storage of tools and Equipment Some departments elect to use tiller-quints, which are tiller trucks that have the added feature of being fitted with an on-board water tank.[5] These are particularly useful for smaller departments that do not have enough personnel to staff both an engine company and a truck company. Real tiller truck responding: My Lego model has this functions: Hauler: - front axle steering "Hand of God" - movable engine pistons, wheel setup 6x4 - cab tilting - openable doors - lighting: 5x PF Lights, 6x Light brick 1x2 - (Lights & Sound) Ladder trailer: - wheels steering, (either with steering wheel in tillermans cab or through gearing on fifth wheel) - openable stowage compartments - sliding doors on tillerman`s cab - side outriggers - (hand operated) - ladder lifting - 2x linear actuator (hand operated) - ladder rotation - (hand operated) ,360° range - ladder boom (hand operated with string) - lighting: 5x PF Lights, Battery-Box, 1x PF Switch,+ 1x M-Motor & 2x PF Switch for flashing effect -
Tuesday, early in the moring. The fire department recive a call of a yacht that's on fire. When the first engine arrives at the scene, the flames are coming out of the front. 2 Firefighters are getting a hose to fight the fire. 2 Other firefighters are looking for any victims. A second engine & a fire boat arrives at the scene to help. The boat is checking if nobody is in the water. The second engine helps with fighting the fire. The fire was under control in 20 minutes. The police is still investigating how the fire started. *Note: Maby some things in the text are not corrrect, English is not my main language The first engine just arrived. The fire boat is at the scene The fire is getting extinguished. The second engine just arrived. The fire is under control, 2 firefighters are checking. I hope you liked this MOC!
-
I thought she deserved a vehicle of her own, but I couldn't really think of many vehicles that'd be useful for a spy, so I decided to go for the classics and build a mini-mecha. To access the mecha's interior, the hood folds up and the chest folds down. Since her Ultimate's main power is beetle bomb, I gave her a little pet beetle. It could be a plushie, but that'd make the launcher completely inexplicable, rather than merely mostly inexplicable. Sadly, I couldn't figure out a way to give it three pairs of legs rather than two. Thoughts? The red light inside the hood is supposed to represent some kind of heat ray device. The tr. red tiles are a stand-in for a Nexo Power shield inlay. When I build it in real life, I'm planning to replace the assembly connecting that little grappling hook to the rest of the mech with a stud launcher. Gallery. Comments and criticism appreciated!
-
Hello, This is my first MOC, which is based off of the only rear mounted pump truck in New Zealand, Sockburn 257, now Nelson 217. (Sorry about the large image size) http://i.imgur.com/GhuhaxQ.jpg http://i.imgur.com/9zgpbWg.jpg http://i.imgur.com/506ZtH9.jpg http://i.imgur.com/O00GtNv.jpg http://i.imgur.com/Wn2sqpo.jpg http://i.imgur.com/zorYV3o.jpg http://i.imgur.com/tCE33lr.jpg http://i.imgur.com/7KA5Cmr.jpg
-
Hi again, today I post my Airport Fire Truck, the model is from the 2013 set 60061 "Airport Fire Truck". I like the design and the model, so I decided not distorting it further. I added a fire hose on the right side, a fire spear in the front, more equipments and lights.
-
Hi mates, today I post my Fire Truck Ladder no. 2, the model is based on 2012 set 60002 "Fire Truck". I added two more big compartments and two small boxes, light, more equipments, two small fire hoses with control panel. Finally, I added more segments to the ladder and a chest.
-
Hello, this is the time to post my Fire Ladder no.1. The model is based on 2004 set 7239 "Fire Truck". Now has a lot of equipments, more storage boxes and compartments, fire hoses and two control panel on the sides, lights, water spear and ladder with 7239 mechanism. This truck can tow a divers unit with dinghy. The divers unit:
-
Hello! I continue to post my creations on Fire Trucks theme. This is the time of the my Off Road Fire Truck. Is based on the model from 2012 set 4208 "4x4 Fire Truck". Over the standard set equipments, now has two more large compartments, more equipments as chainsaw, a fire hose with relative control panel and lights.
-
I think this was my second mini movie. Camping in the wild and scary things will happen.with a twist (of course) in the end.
-
Hello folks! Many people feel disappointed seeing newest incarnation of ToaTahu. Well, I can agree that some details could be made in better way (like arms) but overall I think he's a good set. Not perfect but good. Anyway I decided to give new Bionicle a chance and I bought Tahu. When I finally built him I felt that something is wrong with design - and I slowly began to improve him. And you know what? I really ejnoy this moment! So, here it is. My newest Tahu remake. Brickshelf (no collages) | DeviantArt| Flickr | Blog Don't worry if you feel that pictures are too small. If you go to my flickr/DA gallery (depending on what's your favourite) you should be able to see larger images. If you don't like collages - don't worry, you can still go to my Brickshelf gallery. I'm going to make a short video-presentation but I don't know when I'll finish it. Some details: As you can see his legs are now armoured not only from front but from behind too. I'm not sure about the side-panels but I'm afraid I don't have enough HF red parts. I decided to change his original hands into something a bit different. I came up with some new patents but finally I decided to use something simillar to MrBoltTron's concept because it looks much better. And yeah, he can hold his swords in hands! Last thing in this photo which I mention is armour which covers his gears. Don't worry, you can still rotate them (and arms) but more armour means reduced mobility. Fortunately on acceptable level :) Tahu can hold his swords on his back. The only disadvatage is that he's leaning little backwards but hey - these swords are little heavy! Anyway, for me it's still ok. Original model has a golden mask which makes Tahu more powerful. I made a collage with it: Still looks ok but I'm not sure if red one is better. You see, this construction has many golden parts (probably too much) and it needs some reds for contrast. And - what do you think about using this golden mask for Jaller remake creation? ;) Some extras: "Meet my new pet": Some of you may be wondering - what's happen to Tahu's surfing board? Well, I had so many pictures to process that I totally forgot about this :/ Anyway I hope you enjoyed my creation. And if you like you can ask me about it - I'll try my best to answer all your questions :) Best regards, ~ QQS EDIT Lava Board update:
-
Hello Community! It's been quite awhile since my last MOC. But I wasn't passive. In the meantime I've upgrated some of my models, especially the ones of my petroleum plant fire brigade "Jade Öl AG". So, let's start with a new special tanker equipped with a high reachable Turret, mobile water cannon and a heavy duty pump. It carries 7,000 liters of water and 3,000 liters of foam to the scene. You'll find a few more pics in the gallery on my blog. So, hope you like it. Comments and critics are welcome as usual. More MOCs to come. Regards!
-
Hey guys, This build was just a redo of a castle set i wish i had when i was a kid. A friend told me to enter it into CCCXII so I did but it didn't really fit in to any categories so I entered it into miscellaneous - large. This would have been good in last years categories, as there was a category for a redo of and old set with new parts. But whatever I'm very happy with this build. (also the gate at the front can be raised and lowered by the chains attached and in the middle of the castle there is a trap door that falls down to imprison unwanted intruders) Enjoy guys and let me know what you think! Front view: Rear view Dragon close up:
-
Hi Its been a while since I first posted my origanal Scotsburgh Fire department Appliances photo's http://www.eurobricks.com/forum/index.php?showtopic=75356&hl= so thought it was about time I gave an update. Here are appliances/engines that were introduced through 2014. The first appliance/engine is a Scania/Bronto 28m Allrounder, which is an Aerial Rescue Pump. Basically a combined aerial appliance and Rescue Pump. As detailed its on a Scania crew cab chassis with double rear axle to take the weight and has Bronto 28m boom package. First photo's of this are from my LDD design of the appliance. I have brick built it so photo's to follow. Scania Chassis with water tank Scania Chassis with bodywork Unfortunatley I couldn't work out how to get LDD to allow the boom package to fit on the body, but you'll see it when I post the brick built version. Comments as always welcome.
-
This build has been a slow "Labour of Love" since summer 2012. I have made many modifications to it throughout the past 18 months. And now that Brent Waller's Ghostbuster's 30th Anniversary Ecto-1 Cuusoo project won the latest Cuusoo review I thought now was a good a time as any to post this build. There are a few Lego Ghostbuster Fire House's on the web and I drew my inspiration from Sean Kenny's build which you will see some similarities. My intention is to have this as a "Working" Fire station as part of my Scotsburgh Fire Dept. The following pictures are of first version of building. The first photo is of the station footprint and street. http://www.flickr.co...157641348126655 This photo is of the ground floor Appliance Hall with appliance doorway. http://www.flickr.co...57641348126655/ I then realised that the Appliance Hall wasnt going to be wide enough so, I took version 1 down and revised the footprint and changed the door at the back of the Applaince Hall to lead straight onto the pavement http://www.flickr.co...57641348126655/ http://www.flickr.co...57641348126655/ And completed Ground floor Appliance Hall with stairs leading to the First floor http://www.flickr.co...57641348126655/ First Floor in Build http://www.flickr.co...57641348126655/ http://www.flickr.co...57641348126655/ Ground and First Floor together with Second Floor in build and roof http://www.flickr.co...157641348126655 As can be seen from this photo and the one above, the front and back and both sides of the First and Second floors are symetrical http://www.flickr.co...157641348126655 And this photo shows the size of the building with the Fire engine alongside. It does fit into the Appliance Hall under the Archway, just. http://www.flickr.co...157641348126655 Well that is version 1 and Version 2. More to follow.
-
For a long time, I've had half a fire engine sitting on the shelf. Finally, after finding (and buying.... ) the Lego Fire Station 60004 on sale, I got around to finishing it. (Pardon the quality of the pics) Its taken quite a few iterations to reach the end result, and I quite like it. Its a typical main fire engine - the backstay of any modern fire department. It carries pumps, ladders and breathing apparatuses, as well as its own water tank, used for first efforts until a fire hydrant or similar water supply can be hooked up. Front left view: Rear-right view: Cab: The cab easily seats three, and has rear sliding-doors for easier access. (Or alternatively, just a gimmick from the builders side... ). Fire-chiefs sedan and hose tender trailer: Originally, I wanted to include the hoses on the fire engine itself, but I found it took too much room. Therefore, I decided to design a small hose tender trailer. As the fire engine is already by far the largest truck in the city, adding a trailer seemed a bit over the top. Therefore, I quickly put together a small fire-chief's sedan to pull the trailer. And, for all its simplicity, I quite like it. The tender trailer has a diesel pump, to allow it to pump water from for instance a pond, over longer distances to the scene of the fire. Front-left view: Rear-right view: Comparison with the 60004 turntable ladder truck And a small "action-shot": Thank you all for watching. C&C are welcome, of course. On a side note, I am planning to convert the 60004 building to some sort of modular standard. /Bregir out
-
I got this idea from the new 60061 set but other than that it is my own design. The truck was built of bricks which I bought from flea market. I used an old windshield in poor condition for modification. It was fun to build.
-
Hello everybody, i'd like to introduce my newest creation! This is my minfig-scale ladder truck, based on a Metz L32A on Mercedes Atego Chassis. I hope you enjoy! 1 by hypo_fire, on Flickr 2 by hypo_fire, on Flickr 3 by hypo_fire, on Flickr 4 by hypo_fire, on Flickr 5 by hypo_fire, on Flickr 6 by hypo_fire, on Flickr 7 by hypo_fire, on Flickr 8 by hypo_fire, on Flickr 9 by hypo_fire, on Flickr 10 by hypo_fire, on Flickr 11 by hypo_fire, on Flickr 12 by hypo_fire, on Flickr With kind regards, Heiko
-
https://www.flickr.c...in/photostream/ 2014 Pierce Arrow XT which will be identical to all 6 Squads in the city Cummins Engine, Allison transmission, Whelen LED Lighting, Dual Q sirens, Martin Horns, 21" Grover Horns, EQ2B, Mars 888s, Roto-Ray, 1500 GPM, 500 Gallon tank 50 Gal of Class A&B foam, Full set of Hurst tools.. http://<a href="https://www.flickr.com/photos/114983766@N07/15053205876" title="Squad 1 drivers side by benjamin2051, on Flickr"><img src="https://farm4.staticflickr.com/3897/15053205876_369c66c292_c.jpg" width="800" height="319" alt="Squad 1 drivers side"></a> https://www.flickr.c...in/photostream/ https://www.flickr.c...in/photostream/ https://www.flickr.c...in/photostream/ https://www.flickr.c...in/photostream/ 2013 Freightliner M2-106/ Pierce/ E-One Teleboom This is a one of a kind apparatus for Brickwater, The body was made by Pierce but the Pump, aerial device is made by E-One. https://www.flickr.c...in/photostream/ https://www.flickr.c...in/photostream/ https://www.flickr.c...in/photostream/ STATMEDICS Ambulance 132 This State of the art Ambulance was built by International on a WorkStar chassis and Braun with a Chief XL 14ft box, this unit is classified as an MICU, This unit Features Heat, A/C, Headsets for all personal in the unit, Full Whelen LED lighting with Halogen Scene lights, a Federal Q2B siren, Federal PA300, with a Howler, Grover 21" Stuttertone air horns. https://www.flickr.com/photos/114983766@N07/14889611648/in/photostream/ https://www.flickr.com/photos/114983766@N07/14889514059/in/photostream/ Well the pictures didn't work -__-
-
Smaug laying waste to Lake-Town. Another last minute entry for MEC category C.
-
Hello, I am new here on Euro Bricks, but I have been building for some time and I have started a Fire dept. I was wondering what I could improve on and what is liked/ disliked. There are more, I just haven't gotten around to taking pictures of them..
-
Hi, Ive mostly been building Fire/ EMS/ Police MOCs, but I now want to start building a city with a Downtown, Midtown, Suburb and rural area, Could I please have some tips/ pointers on where to start and how to make it more realistic?
-
A small experimental vignette that allowed me to perform various testing. Rings of Fire by Veynom, on Flickr - First rock creation; - First flame attempt; - First use of my new photo studio. More pictures: Rings of Fire by Veynom, on Flickr Rings of Fire by Veynom, on Flickr Quite far from my usual comfort zone but I enjoyed it.
-
Hi After taking a while to find a good time to upload this, as there have been a few good variations of this Modular plus the Coastguard version and after several requests, I thought now was a good at time as any to upload my version of a 2 bay MOD of the 10197 Fire Brigade. I built this over a year ago and realy only some internal details to finish it off. The building has been extended to the rear also to accomodate the fire engines based there. As my trucks are 23 studs long I needed 25 studs clearance and I wanted a bit of space all around so I built this station on a 48stud long baseplate and the applaince hall floor is 32 studs long using 2 x 16 stud tiles. There is even enough room for the engine from 7945 if it was stationed there. Front View - Date of when Station was extended Rear View - On roof you can see the enclosure for the pole drop from the room and this goes direct to the Ground floor. Side Side (Junior officers room) Side (Breathing Apparatus servicing room) Appliance Hall - Engine Room Upper Floor Rear (clockwise - Dorm, Pole Drop, Lecture Room, Senior Officer's office, Bathroom) Upper Floor Front - Not much different from the original but extra sofa and a table with chairs Hope you liked it and comments are always welcome.
-
As part of SeTechnic's 16th Contest, PG52 / PG5200 posted this great Lego Technic Fire Truck which has both Lego Pneumatics and Linear Actuator mechanisms. His (narrated in French) shows it in action. Read more about it on SeTechnic (in the original French and in this English translation). One can change the Google Translate "To" language to match your native language for better understanding.
