Zerobricks

I'm gonna try my luck, because i always wanted to work there :)

WTF is that ugly thing? A transporter?

Please send me the rules and i will make new topics for each part.

Fine with me :) Gonna keep adding new parts in the same file.

Grouping few parts in a larger part, that cant be taken apart, unless you ungroup it.

Looking cool! Do the other two have the wheels at back? Flame one is the best!

These connectors cant be tilted to 90 degrees bottom to bottom.

20 tooth cown gear 5x11 frame http://media.peeron.com/pics/inv/custpics/....1247111463.jpg 5x7 frame big pneumatic cylinder big pneumatic pump 13 studs long rack technic axle joiner perpendicular triple new 3 studs wide differential old 4 studs wide differential 11x3 panel power functions switch fake piston engine small pneumatic cylinder pneumatic compressor pump 7 studs long rack pneumatic valve (new studless style)

Ability to group parts into a larger module, would be nice too.

Even though the LU-mode palette includes a lot of bricks, there are still many missing. However, with a bit of fantasy and creativity, it possible to create and share alternatives to these bricks by making custom variants of the parts that are that available in LDD. If you want to participate and help add custom made pieces, read the rules and post what you got here Rules of the Topic (Please read these guidelines before posting) - Report piece number and piece description, in order to help to generate the index. - Use code and description provided on peeron website. - For example: 73037 - Winch 2 x 4 x 2 - Insert a thumbnail of your original piece, to provide an immediate identification. - Insert a thumbnail (or more, if you create different versions) of your creation, in order to provide a preview. - The thumbnails should be small, not more than 150x150 pixel (if the piece is complex, thumbnails should be bigger). - Report a comment of your work, specifing limits and advantages. - and obviously... Share you lxf file! INDEX Technic 47224c01 - Pneumtaic Cilinder - by Zblj 2797c02 - Pneumatic Pump - by Zbl bb339c01 - Power Functions Switch - by Zblj x189c01- Pneumatic Cylinder - by Zblj x191c01- Pneumatic Pum Small - by Zbl 4694b - Pneumatic Switch with Pin Holes - by Zblj 5292 - Motor RC Race Buggy - by Zblj 6272c01 - RC Buggy Battery/Reciever Unit - by Zblj 58120c01 - Power Functions M motor - by Zblj 2847c01 - 9V Battery Box 4x14x4 - by Tore M 92693 - Mini Linear Actuator - by Tore M 47154 - Electric Motor 9V - by OrbitSoldier 46217c01 - 3x4x1-2/3 Gearbox - by OrbitSoldier x939 - Technic Thread Small - by bbqqq 47306 - Beam 5 with 2 Ball Joints - by Costy 87407 - Gear 20 Tooth Bevel with Pin Hole - by Zblj [OUTDATED] 64178 - Liftarm 5x11 Open Center Frame - by Zblj [OUTDATED] 64179 - Liftarm 5x7 Open Center - by Zblj [OUTDATED] 67761- Gear Rack 1x7 with Axle and Pin Holes - by Zblj [OUTDATED] 64781 - Gear Rack 1x13 with Axle and Pin Holes - by Zblj [OUTDATED] 63869 - Axle and Pin Connector Perpendicular Triple - by Zblj [OUTDATED] 62821- Gear Differential with innder Tabs - by Zblj [OUTDATED] 2850 - Technic Engine Cylinder - by Zblj [OUTDATED] 62531 - Technic Panel Curved 11x3 - by Zblj [OUTDATED] 6573 - Gear Differential - by Zblj [OUTDATED] Misc. 73037 - Winch 2x4x2 - by Calabar 30295 - Car Base 12x18x1-1/3 - by Deadalus304 71612cx1 - Cone 4x4x7 Drill - by Deadalus304 30299 - Cockpit 10x14x2-2/3 - by Deadalus304 30298 - Windscreen 10x14x2-2/3 Roll Cage - by Deadalus304 967 - Plate 4x8 with Helicopter Rotor Holder - by Giovanne 968 - 4x14x1 Trailer Base - by Giovanne 3137c01 - Brick 2x2 with Wheels - by Giovanne 2605c01 - Brick 1x2x2-1/3 Shcok Absorber - by Toa_Of_Justice x1957px1 - Black Cloth Sail 17x18 - by bbqqq x1957px1 - White Cloth Sail 17x18 with Red Stripes - by bbqqq x1957px1 - Cloth Sail 17x28 [version 2] - by bbqqq x1958px1 - White Cloth Sail 18x20 with red Stripes - by bbqqq 30184 - 6x26x2-2/3 Trailer - by Toa_Of_Justice 4228 - Inverted Slope 5x6x2 - by Giovanne [OUTDATED] Baseplates 2552 - Baseplate Raised 32x32 with Ramp and Pit - by Solidbrick 2552 - Baseplate Raised 32x32 with Ramp and Pit [updated version]- by zinfinion 6024 - Baseplate Raised 32x32 Canyon - by Solidbrick Figures/Animals 30486c01 / 30487c01- Kaadu (Gungan Beast) - by ADHO15 64800pb01c01 - Tauntaun - by ILikePi 64800pb01c01 - Tauntaun - by ADHO15 sw071 - Jabba the Hutt - by ADHO15 sw402 - Jabba the Hutt - by ADHO15

I usually either get idea from thin air, or by randomly playing with bricks, until it hits me :)

This month (June) the competition is all about Wheels – Whether it’s an offroad terrain vehicle, a large flatbed truck, a plane, conveyor belt or otherwise – your model must contain lots of wheels! The wheels do not necessarily need to be for driving on, they do not all need to be of the same shapes and sizes – but they must have a relevance to the model, and there must be lots of them. For me this is such a random challenge, but who cares :). So i suppose you can make multiple axel cranes, heavy transport units, offroad trucks, trucks with trailers... You guys have any ideas?

Good idea! Pressing the button makes its light, right? These would make some great headlights untill you run out of battery

Problem is even with a sliding red gear the friction due to drive torque might rip out the shaft from the u joint.

First of all you dont have enough room for tracks, they are 5 studs wide and you gave them 4 studs width. Secondly tracks dont attach to wheels, but with some work arround you can place them under wheel, and just keep on adding and rotating tracks around.

Thats really cute, and the movable head and tail sure add a,lot to the cuteness :)

Thanks, because this is a big one.

Close it until there is no gap, and use arrow keys for proper closing-opening. Goona try it in LDD now. EDIT yes, use arrow keys or click the angle tools pointers (the ones that look like lego plates with 1 middle stud).

I found another bug. The cross axle connector wont allow axles to go all the way in, but the normal round connector does. Picture:

I was staring at my pumo trying to find better uses for it, and got the ieda for macpheron suspension. This type of suspension is used in most cars for the frontw heels because of its simplicity and space saving properties. I might just build a FWD normalday car with it :)

ART did an 8x8 i think. Look it up :)

Impressive, but i am a bit surprised by the lack of clutches and 1:1 gearing from the M motor for 3 gearbox switching. They really nicely synced track and superstructure rotation! I suggest you to use google translate, it does its job good.

Thats just cool! But why didnt you put the canisters sideways?

Sadly, i disassembled the car for parts and later better rebuilt. There were no issues that i know off, cause XL motors eat less power than XL's.

Curve is the best for me.