Seasider

I like the idea of a non-vehicle contest. Vintage technic sets used to have machines a b/c models. But I agree we might need to define where said machine would be used, or what size of machine you’re talking about. Eg something that you would use at home … so for example, a hand drill, a washing machine, an exercise machine, a food processor The only problem with defining a completion by price is how you define that price. Or are you talking about taking a set from TLG and then making another set from it? We did this with the C-model contest as it was called

The rules state you can use extra wheels for decorative purposes. So I’d interpret that as a 4 wheeled vehicle with a 5th wheel mounted to a rear door, like a Land Rover, would meet the rules

Thanks @Jim I’m sure lots of people will still make random suggestions for rule changes

Thanks @Jim and @Milan. Time to check my box of wheels and tyres and then get my thinking cap on. I’m hoping we get some great varied models with this one.

And hopefully there will be a new contest soon so you could build and entry for that

<cough> @Jim Competition ? <cough>

Don’t go giving clues away so that people start building already

So what happened to the next competition? It all went radio silent

The Speed Champions Bugatti Chiron used a red band as the rear lights

Forgot about that, ours is always a Monday in the U.K. so it’s Monday next week.

Ahh … that explains it … would love to have that sort of free time

How have you managed to reverse engineer that so quickly ?

I’ll wait and see what happens to prices, but a definite add for me as I’ve got all the modern NASA sets

Think they’ve done a great job in this. Good mix of looks and “functionality” to me. Interesting that it picks up on Apollo 17, the last mission. definitely one to add to the space collection

Back of the box is leaked .. 70cm tall (as I calculated/guessed) and on a 30cm base. Plus comes with some side builds too

I think you’re right with the booster parts from the Gunship.

I think the bottom of the boosters are the barrel piece 64951. I think I can see the rings with grooves in them are Technic Pulley wheels. But not sure of their diameter.

I was guessing about 70cm tall too, did a rough count of bricks on the rocket and base. I understand why it’s not the same scale as the Apollo as that would be a very big model and even harder to display. To me this looks great as it is.

You know me @Jim I’d be thinking of something that isn’t an American truck as that’s the obvious choice. But I have a truck in mind that I’m sure fits the bill. Are you going to allow “licenced” models / models based on real vehicles ?

Oooh a new contest, good job I’m back from holiday. A size limit contest is good. I don’t build/have many trucks but I know I’ve got those wheels/tyres in my collection. if you’re going the truck route can we define what a truck is? It’s a very American term and from my view (working in the industry) can be interpreted as many things.

Having just watched @kbalage’s video I find this a really interesting set and definitely one to add to the collection. I was one of the few people that got the Forma Koi set and I do wish TLG did a few more kinetic sculpture / mechanism type sets. Unfortunately watching Sariels review proved to me why I generally avoid his videos these days. He obviously didn’t do the maths to work out the relative size / distance of the sun and earth … it’s huge! And I’d love to know how he’d solve the problems of the moon orbit and earth orbits not being perfect. For (I assume) most people they’re close enough, especially as this is very similar to lots or Orreries that have appeared through history

Yeah it annoyed me that you could see tan, white and even lbg when looking around the model so I tried to convert as much to dbg or black as possible, trying to choose the colour based off where it is on the model. Makes the model look a lot more finished. Things like the red underneath the cockpit annoyed me. as the most basic I’d switch out I’d switch the ball pins to black, any 2l axles to black and also the lbg perpendicular connectors on the wing roots to black.

@Jim - I did a very deep recolour on my ornithopter, I posted a list of everything I changed in the thread in the licensed area you may want to take a look. I can share a photo or take new ones if you need.

I went for as much modification as possible replacing most if not all of the parts that weren’t DBG or Black, even replacing some LBG parts. Here is my full list, listed by part colour. The list shows part (id in brackets), number of, colour I changed to, and then step numbers where the change occurred. thankfully I already had 3L black pins as they’re expensive sorry for the formatting, cut and paste from IOS Notes and I can’t work out how to change font on my iphone White Double split connector (69819) x2 - Black - 103 Brick 1x2 studs on side (11211) x5 - Black - 94,95,245 Axle pin without friction x6 - no changed Liftarm 1x3 (32523) x4 - Black - 17,52,86 Plate 1x4 (3710) x10 - DBG - 115,118,161,189,202,324,326,336,338 Liftarm Thin 1x5 Axle Holes (11478) x2 - Black - 67 Technic Brick 1x6 (3894) x2 - Black - 11 Liftarm 1x9 (40490) x2 - DBG - 144,151 Tan Pin 3/4 (32002) x4 - DBG - 99,295 Axle pin no friction (3749) x6 - not changed Bracket 1x2x2 (44728) x1 - Black - 237 Plate 1x3 (3623) x8 - DBG - 42,76,96,320,324,336 Plate 2x3 (3021) x3 - DBG - 9,89,93 Plate 2x3 (3021) x1 - Black - 239 Brick 1x4 studs on side (30414) x4 - DBG - 45,48,79,82 Arch (3659) x5 - DBG - 139,156 Tile 1x4 (2431) x2 - Black - 159 Slope 2x4 (3037) x1 - Black - 115 Plate 1x10 (4477) x2 - DBG - 45,79 Red Bush (3713) x7 - Black or LBG - 54,61,69,73,126 1/2 Friction Pin (89678) x30 - DBG - 4,5,6,11,13,16,44,48,51,83, 140,141,143,147,148,150,284,292 Friction Pin with Tow Ball (6628a) x20 - Black - 111,112,113,114,145,152, 175,176,177,178,314,315,317,318 Bar with 1x1 Round Stud (32828) - Black - 243 Axle 2L Notched (32062) x31 - Black - 18,67,99,103,104,111,112,113,114, 123,124,175,176,177,178,303,311 Brick 1x2 (3004) x7 - Black - 13,156,237,241,243,248 Brick 1x2 with Hole and Plate (73109) x1 - LBG - 91 Liftarm L Shape 2x4 (32140) x2 - Black - 52,86 Axle 6L (3706) x3 - Black - 61,69,106 Tile 2x6 (69729) x1 - Black - 167 Plate 2x6 (3795) x2 - Black - 11,12 Axle 10L (3737) x1 - Black - 54 Blue Friction Axle Pin (43093) x7 - not changed Friction Pin 3L (6558) x20 - Black - 6,14,111,112,113,114,175,176,177,178, 233,236,297,305,321 Yellow Bush 1/2 (4265c) x4 - LBG - 61,69 Brick 1x1 with Hole (6541) x10 - Black - 115,117,130,134,219,225 Brick 1x1 with Hole (6541) x4 - BDG - 184,187,197,200 Plate 1x2 with Pin Hole Top (11458) x1 - Black - 18 Axle 3L (4519) x8 - LBG - 314,315,317,318 Liftarm T shape (60484) x1 - Black - 67 Brick 1x3 (3622) x2 - Black - 219,225 Liftarm Thin 1x6 (32063) x2 - Black - 101, 102 Orange Bar 1L with Tow Ball (22484) x4 - Dark Bluish Grey - Stages 122, 137, 138 Lime Brick 1x2 (3004) x4 - Black - 47, 82, 262, 271 Plate 1x2 (3023) x1 - Black - 160 Plate 2x2 (3022) x3 - Black - 13,14,322 Plate 2x2 (3022) x2 - DBG - 333,345 LBG Bush 1/2 (4265c) x4 - not changed Bush (3713) x3 - Black - 99,107 Round 2x2 Hole (15535) x1 - Black - 11 Liftarm 1x2 (60483) x2 - Black - 285,293 Technic connector double 3L (32557) - Black - 67 Brick 2x2 studs on side (22885) - Black - 247 Brick 1x2 with hole (3700) x8 - DBG - 13,182,195,232,233,235,236 Panel (87552) x2 - Black - 235 Connector round 2l (62462) x2 - Black - 117 Liftarm crank (61408) x2 - Black - 72,73 Axle and Pin Connector 3L (42003) x8 - Black - 111,112,113,114, 175,176,177,178 Axle connector 3L (26287) x2 - DBG - 131 Slope curved 3 (50950) x1 - Black - 18 Hinge plate (44568) x2 > 44567b x4 - DBG - 325,337 Liftarm thin 6 (32063) x2 - Black - 296 Liftarm 13 (41239) x1 - Black - 61 Pink Plate Round 1x1 (4073) x2 - DBG - 331,343 Nougat Oval 1x2 (1126) x1 - Black - 51

Your right it’s generally said books 1-3 are “normal” and the weird stuff is 4-6