Jump to content

Paul Klop

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    93

  • Joined

  • Last visited

 Content Type 

Everything posted by Paul Klop

  1. Paul Klop
    Thanks for your kind comment . I agree with the tyres. They should have a 'Claas' tyre profile. And with the wide Claas tyres it's more to drive over grass (which a sprayer also does ). This tyres are more meant for water the potatoes and more vegetables. (Credits to my father ). Thanks for commenting!
  2. Paul Klop
    Yes, you are true. I made the sprayer wider than the 'original'. It's 2 studs more than it should be. Otherwise it should be (almost) impossible to put the wheel hubs into the chassis. And as I mentioned earlier, the 'arms are also shorter than they should... I'm hoping that you still forgive this.. Thank you @Leonardo da Bricki and @Jody Meyer!!
  3. Paul Klop
    Thank you all for the very nice comments! In the next video, I'm going to do the insides/internals and the underneath. Because I'm going to film with a real Agrifac (for the next video) it can take a while (I think it wil be the end of september ) . So hopefully you can wait that long... Again thanks for the comments!
  4. Paul Klop
    Thanks, and that's absolutely true. I just watched your video again and it's very smart how you used all the pieces in your C-model! I just measured and here they are: Collapsed Lenght: 51cm Width: 25cm Height: 20,5cm Fold out Lenght: 48cm Width: 130cm Height: 20,5cm The 'arms' on the real machine are 24-51 metres long (different versions) so you can say that the Lego version is scaled between 1:18 - 1:39 But I can't make the 'arms' to long because it's Lego.. And if you look to the main body you can say that the scale is 1:12. That means the 'arms' on the Lego version are way to short to match with the real vehicle . Thanks for your question! Thanks! The wheels are very good for this machine. The only problem is that the Lego wheel hubs have to much play, so you need to strengthen it with some axles and stuff. Otherwise you get a stanced sprayer
  5. Paul Klop
    Hi everyone! After 5/6 months I made a new creation. This time an Agrifac Condor. An Agrifac Condor is a agricultural self propelled sprayer for crop protection. Here are some photos and of course a video enjoy! And the video... Feel free to comment and stay tuned for the next video with a real Agrifac Condor.
  6. Paul Klop
    Congratulations to the winners and the people who entered this contest . Looking forward to the next one
  7. Paul Klop
    16: 10 29: 6 15: 4 25: 3 13: 2 23: 1
  8. Paul Klop
    Yes! I can see them This thing is very amazing!
  9. Paul Klop
    Like some other ones, I also cannot see the pictures . Can anyone, who sees the pictures, tell in which browser the are?
  10. Paul Klop
    Thank you very much! I also uploaded the LDD file
  11. Paul Klop
    Okay sounds very cool ! I'm waiting for the next update
  12. Paul Klop
    Hi, I made a LLD file but I cannot post it on my site so that's coming soon. But I made instructions for the lift gate, you can find them here: http://paul.klop4you.nl/technic/192/ If you have any questions, feel free to ask.
  13. Paul Klop
    In one word: WOW! This thing is going to be very cool. As you said, you have scrapped the gearbox.. Is there a gearbox in the new chassis?
  14. Paul Klop
    Thank you very much!
  15. Paul Klop
    Thanks! You are free to use this design. It would be very cool when reffering to this post but that's not an obligation.
  16. Paul Klop
    Thank you very much! Sorry for the late reaction... Yes, here they are! I tried to make a LDD file of the lift gate but it became a great mess so I try to do it another time. (if you don't want it anymore, please let me know). The side: The loading platform: And finally the overall view: Thanks for your comment! I very like such reactions (the other ones are also awesome ).
  17. Paul Klop
    Thank you very much! Thank you! I see that you are right... The tail gate raises all the way up and then the tail gate closes.. (in real life) . If I tear the truck down I would make some photos from the mechanism. Thanks for your comment!
  18. Paul Klop
    Thank you all very much!!!
  19. Paul Klop
    Thank you very much! I expirimented many times with the tail gate. I made it with pneumatics but that was not accurate enough. Large actuators didn't fit well and after many tries I came up with this idea . Thank you very much! I think you meant this with a belly shot: Thank you very much!
  20. Paul Klop
    Hi guys! Awesome that you want to see my new MOC . It's a Truck with Tail Gate. This truck has a lift gate which works like a real one. The lift gate works with 3 small actuators and the max. weight is 200 grams. That's not much but for Lego parts it's enough. If the load is more than 200 grams, the connection between the middle actuator and the bed falls apart . The truck drives with a L motor and steers with a servo. The 3 actuators are powerered by 2 M motors (1 for highering and lowering and 1 for tilting the bed). Here are some photos and a video. Thanks for watching! If you have some questions, feel free to ask!
  21. Paul Klop
    I didn't see it Thanks for the cool video!
  22. Paul Klop
    Thank you, I tried to make an old race car. You can said it's an F1 car Thanks! I don't know, I don't have those tires so I couldn't test those. But with the larger tires the car is higher from the ground and then it's more like the porsche 804. As I said I don't have those tires and I didn't know that they exist... Thanks for your reply! Thank you very much! The downside of all those PF elements is that you can't make an fake engine in it. I tried to compensate this with the 3 gears at the back. I hope that you understand. But thanks for your comment!
  23. Paul Klop
    Hello everyone! This is my lego Technic Old Race Car. It's not based on any particular model but it must look like an old race car. This car is driven by a L motor, steers with a servo and has suspension. The goal for me was to build a car with suspension. I looked at the 24 Hours Racer (set 42039) how this al works. When I tried to put a servo motor on it I came to the conclusion that I need to change the steering a little bit. Here's a video and some photos. I also made a instructions video (and LDD file) for the front suspension with servo motor. You can download the instructions on http://paul.klop4you.nl/instructions/lego-technic-old-race-car/ and here is the video If you want some photos of the front suspension please say it in the comments. Thanks for watching this topic!
  24. Paul Klop
    If you press F5 (or refresh button) while this website is loading, I think the problem is over. I also have the same problem.. If I press F5 it loads very quickly. Btw, is your front bumper not to low? On the trophy trucks I found on Google the front bumper is as high as the wheel... but overal it looks cool!
  25. Paul Klop
    ..and you have made it! Great job! The steering mechanism is very good, it's a pity that you discovered that the1st and 3rd axle should be steered.
×
×
  • Create New...