Jump to content

legolijntje

LDD Moderator
 View Profile  See their activity

  • Posts

    3,053

  • Joined

  • Last visited

 Content Type 

Everything posted by legolijntje

  1. legolijntje
    That looks very, very nice. Very good job! :thumbup:
  2. legolijntje
    I'm starting to worry now, they're not yet listed on the Dutch S@H
  3. legolijntje
    This may be useful to you.
  4. legolijntje
    Thanks everyone for your models so far. I'm trying to update the index, but I can't reach my index file, because it's in a backup (I had to wipe my pc because I had a virus). But, as stupid as I am, I forgot which program I used to backup I will try some googling, but I'm also busy at the moment preparing for my vacation. That brings me to the point that I will be away for three and a half weeks starting at the end of this week.
  5. legolijntje
    You can just run the setup of the newest version. You don't need to delete or uninstall anything. (At least that's what I'm always doing...)
  6. legolijntje
    There's nothing you can really do about that. I think your best "solution" would be to split your complete model into a few files. For example, if you are building a house, make a file for the first floor, a file for the second floor, a file for the third floor etc
  7. legolijntje
    That's a problem that has occured often. Most of the time, people have placed this part wrong. Check in the book if you placed it correctly, so the little bit that sticks out (not the axle) is pointing in the correct direction (I don't know ho to explain it more clearly ).
  8. legolijntje
    The only reason I can think of not to buy it, is if you don't have enough money. I don't think there are any other reasons... Well, you have probably no organs left
  9. legolijntje
    I also think it won't be sold out so quickly, but it's just that I don't want to take any risks. I will my bang my head 100 times against a wall, if it seems my predection wasn't correct and the thing was sold out in the night I was asleep
  10. legolijntje
    So, does anyone know how late and in which time-zone the set goes on sale? I know it's on 1 august, but 1 august starts earlier in some parts of the world... Anyway, I think I'll just wait until midnight (local time, it's the same as the one in Denmark) to see if I can order one. I think they won't sell out that fast, but I don't want to take any risks. I know this has been asked before, but couldn't find any answer...
  11. legolijntje
    That's certainly possible, I'm using this possibility for a long time already in the LDraw index, also for the Castle theme
  12. legolijntje
    I wonder if it really needs more budget. I mean, take a look at SR3D Builder. It is made by 1 person, but it includes both the advantages of LDD and LDraw and even more: a whole set of tools to animate and test your Technic functions. So, if that can be made by 1 person, it can also be done by the LDD team. But, of course the LDD team has to make all the parts by themself too, which Sergio (from SR3D Builder) doesn't have to.
  13. legolijntje
    It was here
  14. legolijntje
    You can order it directly at Shop@Home from 1 august or buy it in the official LEGO stores (also from 1 august).
  15. legolijntje
    No, that's not a problem of SR3D Builder. It's because the part (in this case an nxt) is made of subparts. You can read more about this here (but maybe there are more solutions). I don't have much experience with this either...
  16. legolijntje
    @happymark: That's a nice room you have there! And the content of the room is even better
  17. legolijntje
    Well, the mirror building function is very simple. When you press the mirror building button, you'll see a mirror appearing on the sreen. You have to place it where you want the the border (mirror) between left and right. After that, you can just build on one of the sides like normally. The only disadvantage though is that you can't select (so can't change color, shape or place) existing parts.
  18. legolijntje
    That looks amazing Sergio. I can't wait to try the Theo Jansen mechanism myself in SR3D Builder The pneumatic movements look also very good. Keep up the good work! Btw, I just remembered something that would be very useful to add in a next release ( I want this for such a loooong time now, but I always forgot to ask): being able to make mostly straight flex axles. Your program can handle curved flex axles very good, but straight ones (such as in the hood of 8145) is a pain. Anyway, the installer is busy now with the newest version. Thanks for all your work
  19. legolijntje
    I add steps and rotation steps in SR3D Builder. I also use the group function to make my sub-models. When I'm done I export all the seperate groups and import and replace them all in MLcad so LPub understands the submodels (it can only understand mpd files, no groups from SR3D Builder).
  20. legolijntje
    Well, the instruction miner isn't made for making the actual instructions, so that's why LPub can do more than the instruction miner The instruction miner is made for adding Steps and Rotation steps and changing the order of the parts. This information is used by LPub to generate the instructions. It are the same META commands MLcad adds for the STEP and ROTSTEP
  21. legolijntje
    First, you have select the gear/axle/whatever you want to add to the animation console with the "Animation Mode - Rotate" button. Then, you press the right mouse button and you select the "Add to animation console". Don't forget you have to register your SR3D Builder first, to be able to use the animation console.
  22. legolijntje
    That looks amazing! Good work Sergio
  23. legolijntje
    The latest version (as you can see here) is version 0.8.3.18 released on 2013.02.08
  24. legolijntje
    I don't understand your worries? That LDraw.xml has nothing to do with rendering LDraw models. That LDraw.xml is used by LDD to correctly export LDD models to LDraw
  25. legolijntje
    What I do when creating instructions: Create the model in SR3D Builder with the sub-models I want in the instructions created in a seperate group Export all the groups Import and place the groups in MLcad Add the (if needed) other things like ghost parts in MLcad Make the instructions with LPub
×
×
  • Create New...