Search the Community
Showing results for tags 'Helicopter'.
-
hello guys this my model lego helicopter in 3D with Softimage : Please escuse me for my English, I am French:) I am a fan of légo technic and I wanted to work on the 3D assembly(editing) of my model of helicopter. I made the 3D at the same time as I went up my Helicopter really lego and here is the result :) Do not hesitate has to tell me that you think of it :)
- 12 replies
-
- Helicopter
- Lego
-
(and 5 more)
Tagged with:
-
UPDATE 13/8-2015: I present to you my finished entry for the TC7 contest, the Van Heli-sing armored van/assault helicopter. I will take you through the transformation process as I show pictures of the various stages of transformation. At first it might look like an ordinary armored van (you know, the ones you see in all the Hollywood movies). Nothing fancy, it has a bull bar up front with some powerful lights, and it features a double bottom with angled armour panels (grey) to help deflect landmines and IEDs it might drive over. And now the show starts: First thing it does is to deploy a tricycle landing gear detup, similar to what you see on larger transport helicopters like the Sikorsky CH-53 etc. At the same time, the car's wheels are retracted and hidden inside the body of the van. Also, the long white axle poking out the front is supposed to be for aerial refueling (no function from that axle, except to give it a more helicopter-y look): Next, a ramp opens in the rear, to fasilitate the deployment of the tail boom assembly: As this is deployed, the roof can be opened as well And the main rotor is deployed upwards and rearwards by about seven studs. Also inside the front roof hatches are two large missiles. Both sides of the vehicle have doors that open towards the back, revealing crew served M134 Miniguns: Inside you can see a red 2L axle peeking out. That is supposed to hold a sniper's rifle (that I of course forgot to fit for the photo). It can be used by hand, or it can take the place of one of the Miniguns: The helicopter can also quickly be configured for a gunship role, by closing the doors and lowering and angling the guns forward: The functions are a good mix of manual and mechanical solutions. A lot of worm gears have been used, and things work satisfactory, as you can see in the video Here be a video of the whole transformation. Proper video, not stop motion . Original post: I've had an idea forthis contest for a long time, but only yesterday got around to put that idea down in some bricks! So far I only have the size and a couple of functions nailed, but I hope to finish it in time for the deadline. The above picture shows the model setup in "civilian".. It is duspposed to be a van of some sorts. Not many features except for steering, and perhaps some opening doors when I get around to start on the bodywork. Next picture shows the model in "battle" mode: As you can see the idea is to turn it into a helicopter. The shape of the thing is loosely inspired by an Sikorsky CH-53 (or at least that was what I had in my mind designing it), but of course at a much smaller scale. The front wheels turn 90 degrees upward and smaller landing wheels are deployed on the underside (not visible on this pic). Making the front wheel mechanism was a real pain, as I really wanted them to have steering when in "civilian". Maybe half the total time building this yesterday was used to figure out a suitable solution there, and I ended up with the worm-drive system you can see in front of the wheels. The rear wheels rotate down under and through 180 degrees, as more helicopter-like are being deployed where the car-wheels were. This was the first thing I designed, and decided the overall scale of the model. It uses a worm-drive system similar to the front wheels. The tail boom extends some 18 studs out to the rear (through the yet-to-be-built rear doors) much the same way crane booms do. The rear part is then manually turned up 180 degrees and the tail rotor blades are manually deployed. The main rotor is lifted up and aft roughly six studs (through the yet-to-be-built roof), and the rotor blades are automatically deployed onece you turn the power on due to centrifugal force. Both main- and tail rotors are powered. I plan to either have deployable stub wings with an assortment of missiles/rockets/guns on each side, or possibly openable doors with deployable crew operated miniguns or something on each side. Will have to wait and see what there's room for Of course the body still remains, as well as some technical issues, but so far most things are working satisfactory. As for the name, I was planning to use Van Damme, or possible Damned Van, but piterx beat me to it. However I am satisfied with the current Van Helising, as it is a double wordplay Hope you like it, and hope to have some more work done by tonight
-
Talia: Awake and alert yet, my Detective? The tranquilliser i prepared was timed to wear off around now. It must be quite dark in there, and the air will run out shortly. Are you beginning to take me seriously, at last? The Heretic throws a safe with Batman inside into a pool The Leviathan Helicopter Before i begin talking i just wanted to say one thing. Batman Incorporated: Leviathan Best. Batman. Comic. Ever So this is Wayne Tower Penthouse as it appears in Batman Incorporated. So i finally finished this Moc after making a few others on the way. I think it turned out ok. My favourite part has to be the Leviathan Helicopter, that will be a keep for the next year or so. I have had this in mind ever since i read Batman Incorporated. What a great conclusion to the run of the decade. So i think i will stop making Batman Mocs for a while and expand to other themes. Based off the events in Batman Incorporated #7
- 5 replies
-
- Batman
- Incorporated
-
(and 7 more)
Tagged with:
-
A few months ago, I've made this MOC. The Rock Raiders can use this vehicle to transport energy crystals and mining equipment to locations what's not reachable for ground vehicles. It's based on the original Rock Raiders 4980 Tunnel Transport. But it's not a replacement for the original one, but a extra air unit with more functionality;) Landing pads adapts to the surface Cabin and engines can be connected together Crystal carrier Bobcat More photo's at Flickr: Hope you like it :)
-
WIP... New version at post #5. 2 YouTube Lego helicopter realistic roter head swashplate LDD cyclic & collective sim 4 by Nachapon S., on Flickr YouTube Lego helicopter realistic roter head swashplate LDD cyclic & collective sim by Nachapon S., on Flickr YouTube Lego helicopter realistic roter head swashplate LDD cyclic & collective sim official 9396 lxf by P4trickvH by Nachapon S., on Flickr
- 54 replies
-
- Helicopter
- roter
-
(and 3 more)
Tagged with:
-
Hey all! This is a bit of a redesign from an earlier copter from last year... I always thought that it would be cool to have a LEGO City theme of the future. Nothing too far into the future... maybe just a "Near-Future" theme. This Copter here comes equipped with NOTAR Thanks for taking a look! And, as always, critques and suggestions are welcome. rongYIREN
- 10 replies
-
- Helicopter
- Future
-
(and 1 more)
Tagged with:
-
Hi, Lately I haven't come around posting any of my MOCs, however I felt that this had to change. So, to start of with, here's my latest creation: the Pegasus UAV. It's an unmanned remotely operated helicopter featuring the latest within surveillance and weapons technology. It was developed to operate from the new corvette (HMS Svea) that I'm currently working on (there's a sneak preview on it on one of the pictures). More information, specifications and pictures can be found over at Mocpages (pictures can also be found at Brickshelf when it goes public). Thanks for viewing. Regards, Wombat
- 3 replies
-
- Helicopter
- UAV
- (and 8 more)
-
Shawna Sheepkorsky needed a way to deliver flowers to and from her shops all over FABULAND. Now, with this helicopter, nothing will stand in her way. Inspired to some extent by the Bell 47, but that didn't make such a good pun. More pictures over on Flickr. Thanks for looking!
-
Hello ! I have made this skycrane for a contest on TechLUG. The objectives were : Have a mechanism for the rotation of the rotors A host mechanism The helicopter must can catch a container It can have a motorization with a battery box and a M motor for the rotation of the rotors ant the host mechanism We had a maximum of 900 parts I chose to make a gearbox to have the possibility to choose between the rotation of the rotors or the host mechanism. The gearbox is activated by a crank. There is a linear clutch to have progressive acceleration of the rotors and to secure they when the M motor is turning. On these pictures, you can see the rotors mechanism. Here, the pictures of the host mechanism. The clamp is openable by a little mechanism. The motorizatioon can be add in the cab, by removing the interior. It is not the best solution, but there is not space is this helicopter. (You can see it in the video) For the design, I choosed to have a thin fairing. The advantage is the helicopter is more resembling reality ; but there is little place for the mechanic. There are just 2 seats in the cab. A made a detailled turbine. It is imposing, it released to the fairing.
- 5 replies
-
- Skycrane
- Motorizable
-
(and 2 more)
Tagged with:
-
REVIEW - 42052 - HEAVY LIFT HELICOPTER INTRODUCTION Helicopters, planes...basically everything airborne is +1 for me. The 9396 - Helicopter is one of my favorite models. I own three copies, which says it all. the news about a new helicopter made me very excited. The news about twin rotors made me even more excited. Although I must admit I was hoping for a Chinook style tandem rotor, instead of a double rotor where one is positioned on top of the other. This set does come with a Chinook style B-model, so maybe that will be worth building. One thing I immediately like better than the 9396 is the color scheme. I love the bright orange-white combination. This set seems to have a huge number of panels, which is not to everyone's liking. Let's find out what's going on underneath that smooth surface! Note: All images can be clicked for hi-res versions. SET INFORMATION Number: 42052 Title: Heavy Lift Helicopter Theme: Technic Released: 2016 Part Count: 1042 Box Weight: 1831 gr Box Dimensions: 57,0 cm x 37,3 cm x 8,0 cm Set Price (MSRP): € 119,99 Price per Part: € 0,115 Links: Brickset, Bricklink THE BOX The box is fairly big, which indicates a pretty big model. Unfortunately the box was damaged. Some cracks and dents, but luckily it wasn't ripped apart, like my Mercedes box. I'm not sure if TLG sends out the sets the same way when they sell via S&H, because I would be slightly disappointed to receive my sets like this. Update: I've seen more complaints about wrecked and/or damaged boxes, so there's room for improvement in the shipping department. The front of the box shows the helicopter lifting it's load. The model is 60 cm long and 53 cm wide. It also shows the contra-rotating rotors. As you can see an M-motor and battery box are included, so there are some powered functions. BACK The back of the box shows which functions are powered. We will deal with the functions later. It also shows the Chinook style B-model, which has motorised functions too. Looking at the front of the B-model I am not very tempted to build it. It looks like a flying guinea-pig CONTENT OF THE BOX The box contains: Sealed instruction booklet with stickers 6 Helicopter Blades 1 Sealed M-Motor 1 Battery Box 2 Soft Axles 10 Unnumbered Bags SEALED INSTRUCTIONS WITH STICKERS The stickers are sealed with the instruction booklet, like we are getting used to with bigger sets. I've said it before, but TLG deserves a big thumbs-up for this! The sticker sheet is still in perfect shape! HELICOPTER BLADES This set contains six of the Large Technic Rotor Blades, first released in the 9396 - Helicopter in 2012. PF BATTERY BOX AND M-MOTOR SOFT AXLES Two Soft Axles, or Flex Axles, are delivered unbagged. 19L? Who knows! More on these later BAGS Ten bags containing the rest of the, mostly white, parts. HIGHLIGHTED PARTS This chapter describes new and interesting parts. Not sure if it's a trend, but like the 24 Hours Race Car this set also has an abundance of panels. I've counted 51 of 'em (not counting the engine covers). It does have two new panels, introduced in most of the 1H 2016 sets. As from today this set officially contains the most Technic Panels. One more than the 42025 - Cargo Plane. 42052 - 51 panels 42025 - 50 panels 42039 - 47 panels BLUE 5x3 BENT PANELS These new Bent Panels seem to be very suited to make fenders/wheel arches and seats. AXLE AND PIN HOLE The axle counterpart of the Pin and Pin Hole. YELLOW 5L AXLE From what I can tell at the moment, the yellow 6L Axle is unique to this set. I made a mistake here. It's actually a yellow 5L axle instead of 6L. RED 6L AXLE Like the yellow 6L axle, the red 5L Axle seems to be unique to this set. This will obviously change over the course of time, but for now it's the only set containing them. I made a mistake here. It's actually a red 6L axle instead of 5L. 19L SOFT AXLES Finally, the black 19L Soft Axles! A lot of people will be glad to see these being used again. Only released in the 8450 - The Mission in 1999, this part has become very rare. DRUM TIPPER Of course these are no Cement Mixer Drum Tippers (60018 - Cement Mixer, 7990 - Cement Mixer). These are Helicopter Engine Covers, and quite good looking ones. They seem to be more versatile then you'd imagine, since they already appeared in 4 other sets. GREEN 3x11 PANEL Two green 3x11 Panels, not to be confused with bright green, used in the 42039. This is the same green as the 42008 - Service Truck from 2013. ORANGE PANELS A collection of 13 orange panels. WHITE PANELS A collection of 34 white panels. WHITE 5x11 TAPERED PANEL PLATE Introduced last year in the Fire Plane, this is a relatively new panel. 2x4 PERPENDICULAR BENT PIN CONNECTOR This 2x4 Perpendicular Bent Pin Connector was introduced in 2013 and it's one of those parts flying under the radar. You won't be needing this every day, but who knows when it might come in handy. PART LIST The set consists of 1042, shown below. THE BUILD Upon opening the booklet with building instructions, I noticed the color of the pages has slightly changed. The pages are lighter blue than we're used to. Probably to increase the contrast and make the difference between the darker colors better visible. This new color is used in every booklet of the new sets. The build setup is a bit different than we're used to. Usually you start by building one side, followed by adding things inside and finished by closing up the model. This time you start by building the fuselage, after which you continue with the gear box and rotors. ROTORS The image below shows the mechanism for the contra-rotating rotors. Actually I made a mistake here. I switched the two turntables. Luckily it didn't take me long to find out. At the top you can see an Axle Connector with Axle Hole which is connected to an axle going through the turntables. This axle is only connected to one of the turntables (obviously). The first set of rotors is connected to one of the turntables, while the other is connected to the axle going through the turntable. This is demonstrated in the video below. GEARBOX Here you can see the setup of the gearbox. A basic setup with a single layer of gears (more or less). You can see the 3L Driving Ring on both sides of the model, used to switch between the different functions. CARGO BAY DOORS I found the mechanism to open the bottom cargo bay doors to be very intriguing. Here you can see three stages of moving the H-Frame down. The video below demonstrates the gearbox and the mechanism for the cargo bay doors. This video shows the gearbox mounted on the fuselage, and the contra-rotating rotors. CARGO CONTAINER The cargo container wraps up the build. FINISHED MODEL Leaving the other building steps for you to discover, we skip right to the finished model. There's always a lot of debate about panels and closing a Technic model with them. I personally love a finished look with panels. Looking at the image below, I can only compliment the designer with his accomplishment. The helicopter looks fantastic! The design itself is fantastic and the color scheme is really spot on. This helicopter looks even better than the 9396 - Helicopter, which I will compare later in this review. The Drum Tipper parts used as engine covers is very well done. You would almost think they are designed to be used in this helicopter. SIDE REAR VIEW In this picture you can clearly see the rear cargo bay door/ramp and the landing gear. The tail rudders are operated manually, which is slightly disappointing. The solution in the 42025 - Cargo Plane was much better. The landing gear is pretty clever though. Very simple, but it works like a charm, using nothing more than gravity. SIDE VIEW The side view shows how well the helicopter has been designed. The panels align very well and the model is almost entirely closed. This is a matter of personal preference, but I absolutely love it. BOTTOM VIEW Yup, there it is...the battery box. You can also see the mechanism to operate the tail wing. I find this to be a weak spot of the model. The lever is positioned very close to the wing itself, which feels a bit useless. It would have been great to operate the wing with the orange Bionicle Tooth located near the tail gate. You can clearly see which panels are used for cargo bay doors. Two 3x11 panels are used as bottom cargo bay doors, and a 5x11 is used as the back cargo bay door (ramp). Both are operated by the Power Functions motor (see features and functions). FRONT VIEW REAR VIEW ADDITIONAL IMAGES Here are two additional images from different angles. PARTS LEFT It's interesting too see TLG provided an extra 19L Soft Axle. It appears to be used in the B-model, but it somehow feels like an added bonus, since this part is wanted by a lot of builders. The 6L"]http://alpha.brickli..."color":11}"]6L Rigid Hose[/url], which is also used in the B-model, is extra too. Since the instruction booklet tells us we are only supposed to get a single 19L Soft Axle, I am not sure whether it's used in the B-model (it looks that way though). FEATURES AND FUNCTIONS This set has the following features: Contra-rotating rotors (Power Functions) Opening bottom cargo bay doors (Power Functions) Opening rear cargo bay door/ramp (Power Functions) Operating the winch Operating tail wing (Manual) Operating tail rudders (Manual) Landing gear Castering nose wheel The following video demonstrated all of the functions/features. I have added an IR receiver and I am using a PF remote to operate the powered functions. As you can see all the functions work very smooth. The powered functions work pretty fast, so there's no waiting for ages before the cargo doors open up. The winch is the slowest of them all, but that makes sense. As you could read in the review, I don't really like the manual tail wind and rudder functions. I know a designer needs to make concessions, but wasn't it possible to operate the tail wing with the orange bionicle tooth. The castering nose wheel does work properly, and so does the landing gear. Both very simple, but they do their job. SUMMARY Like I said at the beginning of my review, I am fan of flying machines. And to be honest, I am an even bigger fan of helicopters than planes or jets. This might influence my judgement. I am also a big fan of white, orange and grey, so that's another plus. And I happen to like models finished with panels. Do you see where this is going?! I absolutely love this model. The 9396 - Helicopter was one of my favorite models, but I like this one even better. The closed design is something I like a lot, as long as the model is packing some functions too. Panels alone don't cut it. Well, this set has some cool features under those panels. The mechanism for the contra-rotating rotors is pretty nifty. So are the bottom cargo bay doors. The things I like the least is are the tail wing and tail rudders. The tail wing is operated manually, but it's a simple lever positioned very closely to the actual wing. And the rudders are operated by simply moving the rudders themselves. As with the Mercedes I am not a big fan of operating a model by using the switch on the battery box. It confuses me, and you can't easily reach it. I understand TLG can't throw in a remote and IR receiver each time they supply a PF motor, but it's probably one of the modifications most AFOLs will immediately apply. That being said, I absolutely recommend getting this fantastic model! SCORE Okay, so how do I grade this set? 9 DESIGN Absolutely magnificent. 8 BUILDING EXPERIENCE Great build with some clever techniques. 8 FEATURES Great functions, but rudder and tail controls need improvement. 8 PLAYABILITY Lots of things to operate, but would work better with a remote control. 9 PARTS Contains lots of new parts and loads of white panels. 9 VALUE FOR MONEY Worth every penny. Will buy another one. 8,5 ABSOLUTE EYECATCHER BONUS COMPARISON I will end this review with a comparison between the "new" and "old" helicopter. As you can see my 9396 has a yellow and black color scheme, instead of the original yellow and red, but it will give you a clear picture on how these two compare. More pictures can be found on my Flickr page. Thanks for reading and I hope you enjoyed it.
-
Eurobricks and Rebrickable were challenged by LEGO® to make alternate models for current year city sets. The builds had to only use the pieces in available in the official LEGO model, be made in LDD, digitized, tested in real brick and be a model a 7-10 year old could build. I received set 60046 "Helicopter Surveillance". This set has a lot of variety, in both parts and colour, but only the masonry profile brick is available in any quantity. Here are my alternate models: Yacht Club Heist On the dock, the white tile gate turns to access to the gang plank. I put the 'Keep Out' stickered tile on the outside brown box. Boat on the Trailer The boat will slide smoothly down the trailer to launch, and the sail rotates. Wind Turbine and Maintenance Truck The wind turbine rotates 360 degrees around the column and the blades spin. There is a trap door in the ceiling to access the roof.
- 4 replies
-
- Helicopter
- yacht club
-
(and 2 more)
Tagged with:
-
Mike and Dr. Lightning can oversee the whole site using this observation helicopter, not only giving invaluable views but unearthing hidden treasures too! Archaeology from the sky has been gleaning amazing results for decades, so of course the Adventurers team need to have a helicopter. I broke one of my rules I half set myself when I started the Adventurer Refresh. I did want to keep things within the timescale I set, the interbellum years and the fashions, styles and technology of the time. However a helicopter was too much to resist. So, in my Adventurer universe, technology is a little more advanced so they can have a helicopter like this um, twenty years too early... I'm going to plead Rule of Cool to this. Mike completed his studies and is now one of Dr Lightning's grad students. Still happy to fly or drive anywhere he is working on a doctorate of his own with field study and adventure in between the sensible research stages. Mike was one of the more annoying characters in my games. Maybe because my little brother insisted on playing with that minifig, maybe it was the stupid little slingshot. Anyway, this figure remains in the spirit of the original, but a little more mature. I worked with the waistcoat, but thought jeans worked well for the outfit. The long hair in place of the messy fringe printed on the old face and this older face print with a similar expression as the old. Still searching for any new discoverie to be made, Dr Lightning isn't ready to retire just yet. With the help of his younger friends he is out and about to observe evidence and formulate new theories. This is a simple update of the figure, I thought the smarter suit and the grey hat worked well for the elder character. It is the detective torso, it looks a little bit 'field work' and a little bit 'lecturing'. Just what Doctor Lightning needs. Anyway, with this post the last of the major Good Guy characters from Adventurer's that I owned and have a fondness for are posted! I'll be making a little central post with a timeline and canon at some point. There are some more MOCs to post for good guys from Pharaoh's Quest and bad guys from Adventurers, then some of my own creation.
- 5 replies
-
- MOC
- Adventurers
-
(and 1 more)
Tagged with:
-
My build for the contest uses sets #8068 and #42020, which have 408 and 145 pieces respectively, for a total of 553 pieces. I used 490 on the ship and 14 on the stand. Leaving 34 and 29 pieces unused. The Leftovers by CleverNiftyDude, on Flickr Major pin and axle shortage with these two sets. VTOL Heli-plane by CleverNiftyDude, on Flickr The stand,...barely stands, but I was able to get some cool banking shots,... as it slowly fell over. VTOL with Pilot by CleverNiftyDude, on Flickr Just happen to have a matching Technic Fig for scale,..Nice! Unfortunately my entry post will be pilot-less, as he is not part of either set. VTOL Cockpit by CleverNiftyDude, on Flickr A close-up of the pit, with assorted NF controls and interface. VTOL Top view by CleverNiftyDude, on Flickr Functions incude: Manual 90 deg. swivel of wings/props/landing wheels Manual tail fin rotation HOG prop spin. HOG Ratcheted rescue basket I think I'm going to try to get a few more photos before I enter it. Cheers.
-
The AVH scout craft is used for travel within the narrow confines of major population centers. Where more typical fighters are considered a safety risk. The landing skids have room for a pair of troopers. EDIT: I found the lost roto piece, added plasma cannons and a larger tail stablizer. image by austindhinton95, on Flickr image by austindhinton95, on Flickr