Pentomind Posted May 23, 2018 (edited) Hello ! For my first topic here I would like to share with you a small thing I made that proved itself very useful ! I've had my 31039 sitting at the top of a 2 meters high shelf for a few month now and all I could see all day was the underneath of it. I was quite sad of this because I love this set and it's a very displayable model so I decided to work on a stand to display it. I wanted it to be : - As light as possible - Easy to use with any model - Made of common parts (actually the few parts I had left available) - And most important with ADJUSTABLE TILT ANGLE so I can modify the model position depending of how high the model is displayed. Here is the result : The stand is very sturdy and can handle a quite heavy model as long as it is well balanced on the stand. The model connects thanks to two 1x4 Technic bricks joined by a 2x4 plate : The parts are quite common and the rarest of them is the black 24T (I wanted the stand as black as possible ) Here are some pictures of the stand with the model on display : I also tested it with the 75102 and 75175 and both worked fine with the stand ! I think it can be easily modified to display technic models by replacing the technic bricks with Beams. I hope you will enjoy this stand, feel free to ask any question or suggest any improvement ! Oh and here is what it looks like on display at the top of the shelf : Edited May 23, 2018 by Pentomind adding more pictures Share this post Link to post Share on other sites
Littleworlds Posted May 23, 2018 Nice! This is definitely something worth having. I'm using non-technic parts for mine so far, but this one really gives the displays dynamic. Share this post Link to post Share on other sites
Shiva Posted May 24, 2018 Pentomind, thumbs up to that display stand :) Share this post Link to post Share on other sites
leroyjenkins Posted June 1, 2018 this is really sweet. would you be able to post a pic of just the bottom part of the stand? is that part 30260 that allows it to slant? thanks Share this post Link to post Share on other sites
Pentomind Posted June 2, 2018 (edited) 13 hours ago, leroyjenkins said: this is really sweet. would you be able to post a pic of just the bottom part of the stand? is that part 30260 that allows it to slant? thanks I was not able to identify which part is 30260, but here is a picture of the bottom part : and here is a copy of the part list to build this stand (two half bushes are missing from the list) : Edited June 2, 2018 by Pentomind error in part list Share this post Link to post Share on other sites
leroyjenkins Posted June 4, 2018 thanks- i appreciate it Share this post Link to post Share on other sites
Marts25 Posted June 8, 2018 Excellent, I love your stand because it would be useful for my model... I have encounter problems to make all position of a horse without stand, A horse of 1.5 kg of bricks. Do you think it could support it??? thanks and nice post! Share this post Link to post Share on other sites
Pentomind Posted June 18, 2018 On 6/8/2018 at 3:14 AM, Marts25 said: Excellent, I love your stand because it would be useful for my model... I have encounter problems to make all position of a horse without stand, A horse of 1.5 kg of bricks. Do you think it could support it??? thanks and nice post! I'm not sure it could handle the weight of the horse, It's possible that the axle running trough the gear at the bottom twists because of the weight. Maybe it could work if the horse have two legs on the ground, or if you create a reinforced version of the stand... Share this post Link to post Share on other sites
Personne Posted November 22, 2020 (edited) Hello, I know it is an old post, but would you be kind enough to take a picture of the part. If you have time, please post more close up pictures, I will create an LXF or IO file, and make it available to all Edited November 22, 2020 by Personne Share this post Link to post Share on other sites
emkra Posted January 7, 2021 Great design. I need couple of those for my planes. Then I will have to worry about cat turning them over. Share this post Link to post Share on other sites
emkra Posted January 7, 2021 On 11/22/2020 at 8:44 PM, Personne said: Hello, I know it is an old post, but would you be kind enough to take a picture of the part. If you have time, please post more close up pictures, I will create an LXF or IO file, and make it available to all Marked part is 2905 listed in part list Share this post Link to post Share on other sites
emkra Posted January 7, 2021 I made stud.io file of the stand. I did not see any particular function of part 32291 - was it used just because it was available? https://www.dropbox.com/s/247fm8uszw4wjej/Pentomind_Stand.io?dl=0 Share this post Link to post Share on other sites
Pentomind Posted January 7, 2021 Thank you. The purpose of the part 32291 is not shown on the pictures but there actually is one. I added this part to be able to easily attach a 1x4 (or 6 or 8) tile using half Technic pins so I can add a label to the stand like the name or reference of the model displayed. Share this post Link to post Share on other sites
emkra Posted January 7, 2021 I created one using my own stock (not entirely black). It serves the purpose perfectly. Share this post Link to post Share on other sites
Pentomind Posted January 7, 2021 1 hour ago, emkra said: I created one using my own stock (not entirely black). It serves the purpose perfectly. I'm happy to know that it is useful to other people. One of my coworkers who is not into lego very much asked for two of them for a x-wing and a tie fighter he bought. Don't hesitate to share a picture of your stand with us. Share this post Link to post Share on other sites
emkra Posted January 17, 2021 (edited) Display stand in action. For the white & red plane I had to use additional bigger plate. Edited January 17, 2021 by emkra Share this post Link to post Share on other sites