Leewan Posted January 22, 2015 PoI and PoE are my favourites ! The proportions and the Hau Mask of Fire make Ekimu look kind of chubby, it's funny. Where did you get 4M length armor in white? Its not in any set I know of Knockoff Ninjago action figure. Share this post Link to post Share on other sites
TheDesuComplex Posted January 23, 2015 One good idea for a temporary mask for Ekimu would be the Golden Skull Spider mask. It has similar proportions and color to the MoC, and you could even say that Ekimu is being controlled by the LoSS using it. Share this post Link to post Share on other sites
Logan McOwen Posted January 23, 2015 (edited) That's pretty good! What mask/helmet do you intend to use on your final version of Ekimu? I have actually ordered the gold Skull Spider mask from Bricklink, and will be using that. Where did you get 4M length armor in white? Its not in any set I know of They're from a knockoff Ninjago Ultrabuild set I got a while back. PoI and PoE are my favourites ! The proportions and the Hau Mask of Fire make Ekimu look kind of chubby, it's funny. I kinda wanna keep him in the Hau because of that :P Edited January 23, 2015 by LewiMOC Share this post Link to post Share on other sites
Rayskull Posted January 23, 2015 (edited) @ Leewan: I really like the squat look of Ekimu I just completed my Protector of Ice! No new armor, under his chest you can see white teeth going around his waist mounted to an angled Technic joint. I like the Megatron style cannon here. (also kind of looks like a possible Ekimu hammer build hmmm) The knees are tight with the extensions, but I like the look. I considered adding a sword, but I really like this clean look. I filled in his back: Installed a ball joint on his back. you can see the weapon mods better here, they come off cleanly no peg left in the hand. Lets drop the back plating so you can see the shoulder build: Its my original mod. The teeth on the minifig arms cover the tops of his shoulders nicely. Group Shot! Of the three he's the best balanced, nothing heavy on his back. Ironically I planned on only doing a POI, but the colors of these kits were sooo nice. I think I'm taking a break till the new sets come out :P Edited January 23, 2015 by Rayskull Share this post Link to post Share on other sites
Dr_Chronos Posted January 23, 2015 (edited) @ Leewan: I really like the squat look of Ekimu I just completed my Protector of Ice! No new armor, the're white teeth going around his waist mounted to an angled Technic joint. I filled in his back: Lets drop the back plating so you can see the shoulder build... my original mod :) The teeth on the arms cover the tops of his shoulders nicely. Group Shot! I think I'm taking a break till the new sets come out :P VERY nice Oh hey, I made some mods to my Protectors recently! Check 'em! Also, I made a mockup of Ekimu early this morning. Apologies for the grainy photos, I'm lazy and just used my phone :P Looks very similar to the real ekimu if not exact Edited February 20, 2015 by VBBN No need to quote large strings of images Share this post Link to post Share on other sites
Leewan Posted January 23, 2015 @ Leewan: I really like the squat look of Ekimu Oh, I never said I didn't like it. Your Protectors are really badass, especially the PoJ and PoI. Share this post Link to post Share on other sites
Rayskull Posted January 24, 2015 (edited) Oh, I never said I didn't like it. Your Protectors are really badass, especially the PoJ and PoI. Thanks, I found out later POI looks better with shorts. I see what you did there with POE's pants. BTW do you have Pohatu, curious to see what that mask looks like on Ekimu. One more thing if you remove the new armor from his knees, you'll have the official Ekimu build :) He has silver feet and blue upper thighs, but I'm certain you nailed it! . . . There, POI with shorts, like the official build! Edited January 24, 2015 by Rayskull Share this post Link to post Share on other sites
Mutant Orc Posted January 25, 2015 All these Mods and MOCs are great! Share this post Link to post Share on other sites
BrickBuilder3213 Posted January 25, 2015 I love all of these MODs... But, Lewis' Chubby Ekimu is a winner for me. ;w; With a few colour swaps, he could be Turaga/Mask Maker Lhikan. Share this post Link to post Share on other sites
Mr. Gundam Posted January 26, 2015 @Rayskull, the extensions on the legs are genius, pure genius @LewiMOC, Your Ekimu MOC is awesome Share this post Link to post Share on other sites
Logan McOwen Posted January 26, 2015 I love all of these MODs... But, Lewis' Chubby Ekimu is a winner for me. ;w; @LewiMOC, Your Ekimu MOC is awesome I'm glad you guys like him! :D Share this post Link to post Share on other sites
Rayskull Posted January 26, 2015 (edited) @Rayskull, the extensions on the legs are genius, pure genius @LewiMOC, Your Ekimu MOC is awesome I love the extension piece, as long as dark bley is part of the overall colors the outcome is fantastic! ...also you can trap trans colors... Making them accents. Still playing with the legs on POI. Now he looks like the rest with bell bottoms. -the ekimu build is super nice... I may try it with Pohatus mask :) . Edited January 26, 2015 by Rayskull Share this post Link to post Share on other sites
Rayskull Posted January 30, 2015 (edited) Can I bother you guys once more... I redesigned the shield so as to store a sword (that he was surely missing) I made a few other adjustments...moved the gun forward (better pose-ability), put normal studs in and changed the arm and leg build Edited January 30, 2015 by Rayskull Share this post Link to post Share on other sites
Logan McOwen Posted January 30, 2015 (edited) More from me! I got the Protector of Fire yesterday, and made some modifications to him. He's also got a couple of friends. Please excuse the huge, grainy photo. Edited February 23, 2015 by Leewan Resized picture Share this post Link to post Share on other sites
Rayskull Posted January 30, 2015 (edited) Nice, they look like they're awaiting orders. I spy a POI with a POF build :) Edited January 30, 2015 by Rayskull Share this post Link to post Share on other sites
Rayskull Posted February 12, 2015 (edited) Okay guys its been a while, all the excitement has died down. I've been tinkering and I have a new super complex shoulder design. This is a modification of my original mod. Originally I wanted more support for the shoulders. I wanted to lock them in. and so I created a cage for the shoulders: http://www.brickshel...oulder_cage.png This is a good setup for a POF / POW / Ekimu build. This build yields new opportunities for shoulder armor.... of course you may have other ideas. The green section is completely optional here. The back will look busy, or more bionicle-y. http://www.brickshel...lder_cage_2.png A few more pics for clarification: http://www.brickshel...lder_cage_3.png http://www.brickshel...lder_cage_4.png I'm waiting on a few pieces to finish this up. Edited February 23, 2015 by Leewan Share this post Link to post Share on other sites
Rayskull Posted February 13, 2015 (edited) Okay, so my previous mod was not very elegant. I have much more simple reinforcement: which in person looks like this: not too different from the front, shoulder spikes retained: Edited February 16, 2015 by Rayskull Share this post Link to post Share on other sites
TheOneVeyronian Posted February 13, 2015 I know I'm really late to the party, but I have got to say that all the Protectors and the alternate builds really are brilliant. In fact, a while ago it gave me the inspiration to create a baby version of my sigfig (which I'll show if people really want to see it), so I must give credit to Rayskull for the wonderful little build I just wish I had enough little Technic pieces to make all my Protectors look even anything like these ones Share this post Link to post Share on other sites
Rayskull Posted February 14, 2015 (edited) I know I'm really late to the party, but I have got to say that all the Protectors and the alternate builds really are brilliant. In fact, a while ago it gave me the inspiration to create a baby version of my sigfig (which I'll show if people really want to see it), so I must give credit to Rayskull for the wonderful little build I just wish I had enough little Technic pieces to make all my Protectors look even anything like these ones You can through Bricklink for about $10. Pay with Paypal. Give it a shot. I still bought like 5 sets so I don't feel guilty buying new parts from resellers...who I think also purchased some in bulk. That's how I do it. BTW show us your Sig fig! Edited February 14, 2015 by Rayskull Share this post Link to post Share on other sites
TheOneVeyronian Posted February 14, 2015 (edited) You can through Bricklink for about $10. Pay with Paypal. Give it a shot. I still bought like 5 sets so I don't feel guilty buying new parts from resellers...who I think also purchased some in bulk. That's how I do it. BTW show us your Sig fig! Oh, I use BL all the time, the problem arises from not having enough money left over for BL. That and I've spent all this month's BL fund on another MOC And sure, I'll show you my sigfig. The big one is my sigfig, the Protector size one based on your build is the baby version. Be aware: the big one especially has quite a lot of custom sculpted parts as it's impossible to replicate the self-made character with purist techniques: And obviously a pic of just the one actually relevant to this thread. The head is custom but everything else is purist: Sorry about the clutter. EDIT: Typo. My new computer seems to have a habit of adding random keystrokes. Edited February 14, 2015 by TheOneVeyronian Share this post Link to post Share on other sites
Rayskull Posted February 14, 2015 looks great in those colors, the custom head has a story I'm sure. Hands and feet on the big one look nice. All sorts of cool stuff in the background. Share this post Link to post Share on other sites
Crabster Posted February 14, 2015 (edited) Great. All your custom pieces are very cool. What the type of material did you use to make those parts? Amazing one eye Bugatti veyron head! Edited February 14, 2015 by Crabster Share this post Link to post Share on other sites
TheOneVeyronian Posted February 15, 2015 Great. All your custom pieces are very cool. What the type of material did you use to make those parts? Amazing one eye Bugatti veyron head! Thanks! The head sculpt for the big one was actually made over 3 years ago. Believe it or not, the heads are made using paper, reinforced using aluminium mesh, then painted and finished with polyurethane varnish. The arrowhead is made with clay and finished a similar way. In fact, I might make a new topic covering those and other similar builds to avoid cluttering up the thread that is supposed to be about Protector builds, but I would have to do a lot of preparatory work beforehand for them to make any sense Share this post Link to post Share on other sites
The Phantom Terror Posted February 20, 2015 Unfortunately, I haven't been able to make any custom Protectors of my own with the new parts yet. But I did try using this torso for a larger build. I think it works. :) Share this post Link to post Share on other sites