Bricksandparts Posted June 4, 2012 Hey bricksandParts. Could you try Those Decals i requested Next Maybe, I won't be able to do all of them though, which ones are most important? Share this post Link to post Share on other sites
Nick Gemini Posted June 4, 2012 (edited) Maybe, I won't be able to do all of them though, which ones are most important? Li Mei & Christie Monteiro & Mileena . Edited June 4, 2012 by Nick Gemini Share this post Link to post Share on other sites
JeanGreyForever Posted June 5, 2012 Hey Bricksandparts. Could you possibly make the Jean Grey/Phoenix decal I requested? Share this post Link to post Share on other sites
Wormwood Posted June 5, 2012 Hello, I'm new here. I was wondering if any of you might be able to help me out with something. I really love LEGO microfigs, and was wondering if it'd be possible to create a LEGO Voldemort (from Harry Potter) microfig? This would utilize the same face and front torso as the standard minifig, but scaled down just slightly to fit a LEGO microfig body. Here's a pic of the original LEGO figure: http://images2.wikia.nocookie.net/__cb20110222051916/lego/images/thumb/c/ce/Voldy2.jpg/307px-Voldy2.jpg And for reference, a pic of a LEGO microfig: http://www.thebricklife.com/wp-content/uploads/Lego-Champion-Microfigure.jpg You'll notice that the microfig is essentially one solid color, except where the torso and face are, etc. So, the Voldemort would be a black body, black all up and down the back, black legs, black sides, a decal-ed torso and face on just the front (a bit of the sides wrapping around, for the face, as seen in the pic). Would this be at all possible? Would any of you be willing to help create this for me, for a price/know of someone who would? I'd like it as close to professional LEGO quality as possible, with the decals pretty much permanent, if possible. Please let me know. I'd really love to just buy the completed microfig from someone who knows what they're doing. Thanks very much! Sincerely, Wormwood Hi everyone, sorry to be annoying, but would anyone be able to help me out with this? I'd really appreciate it! Thanks. -Wormwood Share this post Link to post Share on other sites
Emperor Krulos Posted June 6, 2012 (edited) Sandy Cheeks Decal on Flickr. sandy_cheeks von emperorkrulos auf Flickr And of Phoenix. This one is in two versions: regular female minifig (used the cmf cheerleaderas reference) and simple circular shapes phoenix_jean_grey von emperorkrulos auf Flickr Sorry. Fledglings may not post urls. Edit: Added thumbnail views. Edited June 7, 2012 by Emperor Krulos Fixed links urls. Share this post Link to post Share on other sites
JeanGreyForever Posted June 7, 2012 Sandy Cheeks Decal on Flickr. flickr.com/photos/77166538@N02/7346066820/ And of Phoenix. This one is in two versions: regular female minifig (used the cmf cheerleaderas reference) and simple circular shapes flickr.com/photos/77166538@N02/7346195696/ Sorry. Fledglings may not post urls. Oh love it!!! Thank-you so much :) Share this post Link to post Share on other sites
Emperor Krulos Posted June 7, 2012 Voldemort Microfig. There is no microfig template I'm aware of, so I had to measure it out myself. I hope it works. voldemort von emperorkrulos auf Flickr Share this post Link to post Share on other sites
mrklaw Posted June 7, 2012 (edited) Hi, I'd love a 'Big Ben' clock face decal that would fit on a 2x2 tan tile. The Big Ben architecture set is great, but many people have said that the clock face sticks out too much. Also its a generic white clock with a second hand which is all wrong. Big Ben only has hour and minute hands, plus it is much more ornate than the standard clock. A custom decal on a square tile would be able to get both the clock face with more detail, but also the square gold detail surrounding the clock. (apologies if this is strictly minifigs only, I couldn't see where else to post) edit: As the clock face is white, and printers don't print white, would I need to apply the decal to a white tile I guess? Edited June 7, 2012 by mrklaw Share this post Link to post Share on other sites
bekindsorewind Posted June 10, 2012 (edited) Sandy Cheeks Decal on Flickr. sandy_cheeks von emperorkrulos auf Flickr And of Phoenix. This one is in two versions: regular female minifig (used the cmf cheerleaderas reference) and simple circular shapes phoenix_jean_grey von emperorkrulos auf Flickr Sorry. Fledglings may not post urls. Edit: Added thumbnail views. Thanks so much! It looks exactly like the original torso. Could you make a replica of this torso in Yellow (I use sticker paper) http://www.bricklink.com/catalogItemPic.asp?P=973pb1143c01 With this bow tie pattern on the neck? http://www.bricklink.com/catalogItem.asp?P=973pb947 thanks so much! = ) i kinda have made a mockup : Edited June 10, 2012 by bekindsorewind Share this post Link to post Share on other sites
LuxorV Posted June 10, 2012 There is no microfig template I'm aware of, so I had to measure it out myself. I think I'll have to correct you on this (a bit technical, probably, but it has all the necessary elements). Share this post Link to post Share on other sites
Emperor Krulos Posted June 10, 2012 (edited) I think I'll have to correct you on this (a bit technical, probably, but it has all the necessary elements). Thank you very much. This will make things easier. You should have it added to the index, so other may find it. big ben clock face for mrklaw Edited June 10, 2012 by Emperor Krulos Share this post Link to post Share on other sites
LuxorV Posted June 10, 2012 Thank you very much. This will make things easier. You should have it added to the index, so other may find it. You're welcome. Actually, it is in the Index, in the Templates category. Share this post Link to post Share on other sites
Hersbrucker Posted June 12, 2012 (edited) It's not for MiniFigs, but I hope somebody can help me with that. I need a scan of this part: Best way in print size 1x4 Tile And maybe somebody can change it also for a 1x2 Tile Maybe I don't need this original decal, you can create also a own decal like this Edited June 12, 2012 by Hersbrucker Share this post Link to post Share on other sites
Blockburn Posted June 12, 2012 Hi! I was wondering if somebody could make me a M43 Telogreika uniform decal in Olive Green. I would really appreciate it! M43 Olive Green Sample Thanks! Share this post Link to post Share on other sites
Nick Gemini Posted June 12, 2012 (edited) I Hate to bug.But could somebody create those Decals i requested last week. I Really Need them. Here they are again (Ref Pics) Mokap (Mortal Kombat) http://images3.wikia.nocookie.net/__cb20110509181810/mk/images/thumb/8/8c/Mkda-render53.jpg/250px-Mkda-render53.jpg Mileena (Mortal Kombat 9) http://images2.wikia.nocookie.net/__cb20110505174827/mk/images/thumb/9/92/Mileena_versus_render Li Mei (Mortal Kombat Deadly Alliance) http://img.gamefaqs.net/screens/3/7/7/gfs_52758_2_7_thm.jpg Christie Monteiro (Tekken) http://upload.wikimedia.org/wikipedia/en/thumb/c/c6/Christie-Monteiro.png/250px-Christie-Monteiro.png Edited June 12, 2012 by Nick Gemini Share this post Link to post Share on other sites
Fives Posted June 13, 2012 (edited) Hello everyone! I'm new to the customization world. I've dabbled in a few little things, like altering pieces, but nothing on a full minifig scale. With the upcoming release of the new Old Republic Star Wars sets, I noticed that there were some characters from the trailers for the game which were left out of the sets. It would be much appreciated if someone could make face, torso and leg decals for Kao Cen Darach and Darth Vindican. Here are some reference images: Kao Cen Darach http://images1.wikia.nocookie.net/__cb20111206011335/fanon/images/d/d9/Kao_Cen_Darach.jpg http://images.wikia.com/starwars/images/9/91/SateleShansMaster-Return.jpg (if you could leave the horns off the decal, that would be great! I plan on painting a leftover Maul headpiece) Darth Vindican http://images.wikia.com/starwars/images/8/88/MalgusMaster-Return.jpg http://images4.wikia.nocookie.net/__cb20120503101204/swtor/images/c/c3/Malgus_and_Vindican_next_to_Fury.png (I would like if Vindican's skin color was dark red) Again, thank you to whoever makes these! Thanks a bunch! EDIT: also, this may not belong here, but what sort of paper should I use for printing decals? I've never done it before, so I'm unsure if sticky paper from Staples would work, or if I need something more specific. Edited June 13, 2012 by Fives Share this post Link to post Share on other sites
RoyalBrickCustoms Posted June 14, 2012 Hello everyone! I'm new to the customization world. I've dabbled in a few little things, like altering pieces, but nothing on a full minifig scale. With the upcoming release of the new Old Republic Star Wars sets, I noticed that there were some characters from the trailers for the game which were left out of the sets. It would be much appreciated if someone could make face, torso and leg decals for Kao Cen Darach and Darth Vindican. Here are some reference images: Kao Cen Darach http://images1.wikia.nocookie.net/__cb20111206011335/fanon/images/d/d9/Kao_Cen_Darach.jpg http://images.wikia.com/starwars/images/9/91/SateleShansMaster-Return.jpg (if you could leave the horns off the decal, that would be great! I plan on painting a leftover Maul headpiece) Darth Vindican http://images.wikia.com/starwars/images/8/88/MalgusMaster-Return.jpg http://images4.wikia.nocookie.net/__cb20120503101204/swtor/images/c/c3/Malgus_and_Vindican_next_to_Fury.png (I would like if Vindican's skin color was dark red) Again, thank you to whoever makes these! Thanks a bunch! EDIT: also, this may not belong here, but what sort of paper should I use for printing decals? I've never done it before, so I'm unsure if sticky paper from Staples would work, or if I need something more specific. I would be happy to create these Star Wars decals for you. I specialize in SW and Castle themed customs specifically Jedi so this will be fun to do. I don't know how long it will take but I will post pics when I'm done. Hi Folks, I wondered if one of the talented folks on the Eurobricks forum could possibly create a custom decal for me? It's a decal of this armour, from the Star Wars The Old Republic Game. For reference, the armour set is called Jedi Battlelord's Armour: This is a screenshot of my Jedi Guardian, Master Kurtt Krueger. I would ideally like two decals for this armour, one fully coloured, and one with the green areas left blank, to be used with waterslide transfer paper over an appropriately coloured torso. Not sure what sort of decal could be done with the legs, if any. Many thanks to whoever decides to have a go at this armour/decal. Cheers, Kurtt Hey I'm making some KOTOR decals for someone else and I'd be happy make yours also. I'll post pics when I'm done. Share this post Link to post Share on other sites
Fives Posted June 14, 2012 (edited) I would be happy to create these Star Wars decals for you. I specialize in SW and Castle themed customs specifically Jedi so this will be fun to do. I don't know how long it will take but I will post pics when I'm done. Thank you so much! I do have one question: in regards to printing decals, what should I use? Does any sort of sticky paper work, or do I need something more specific? Again, thanks so much! Edited June 14, 2012 by Fives Share this post Link to post Share on other sites
bekindsorewind Posted June 15, 2012 Could someone make this torso, but make the jacket available for any color? (transparent) http://www.bricklink.com/catalogItemPic.asp?M=lor012 Share this post Link to post Share on other sites
azuremoon Posted June 16, 2012 i'd hate to annoy anyone but i would like a ninjago pythor styled torso/legs decal. preferably with a purple background. Please please please thanks in advance azuremoon Share this post Link to post Share on other sites
mrklaw Posted June 16, 2012 Thank you so much! I do have one question: in regards to printing decals, what should I use? Does any sort of sticky paper work, or do I need something more specific? Again, thanks so much! You can get away with self adhesive printer labels, or better - waterside decals. See info here - Waterside decal thread Share this post Link to post Share on other sites
Emperor Krulos Posted June 16, 2012 Not my best, but I doubt it will be noticed much on the actual Minifig frodo frodo Share this post Link to post Share on other sites
PMJ Posted June 17, 2012 I'd like to request back and front decals for Res-q torsos in green, olive green, and tan. Share this post Link to post Share on other sites
Emperor Krulos Posted June 17, 2012 (edited) Res-Q Decals They are transparent, so that you can put them to any Minifig Body Edited June 17, 2012 by Emperor Krulos Share this post Link to post Share on other sites
