Search the Community
Showing results for tags 'old fashioned'.
Found 4 results
-
This updated version of my 2023 MOC of the UP house - set 43217 (and a back half addition I found on Rebrickable by user rykfield) features a new removable modular footprint. The green Studebaker is also new. This version of the house folds open and locks shut on a Technic pin. I built the house's rear half from some movie-accurate instructions on Rebrickable, as seen here. The rear half of the house. The lower floor features a living room, foyer, and dining room while the upper floor features a bedroom and music room. This is the inside of the front half of the building. The rear half of the house's interior. Most of the furniture seen in these two pictures is recolored from the Friends 'Downtown Flower shop and Furniture Store' (set 41732) along with a few pieces from the 'Moving Truck GWP' ( set 40586) and the original UP house itself. The removable modular base without the house. It features a birdbath, driveway, and opening gate. This car's bullet-nose front end was inspired by the look of the 1950 / 51 Studebaker Commander while the color scheme and rear bodywork were inspired by a old Indiana Jones MOC by @hachiroku. The rear has two coverings partially obscuring the rear wheels, in true '50's elegance. The roof comes off to place a figure at the wheel and in the backseat. This mini fig (the owner of house and car) is modeled after my Great Uncle Jack. (the family just calls him Uncle Jack) He's an ex-Marine, Korean War vet, and tough as nails with razor-sharp wit. Yet he's also the nicest, most friendly man you'll ever meet. NOTE: Sorry for the dark colors of the photos. My phone hates taking pictures of things that are blue and / or green. I had three different light sources, and it still turns out too dark! Thoughts? -
What does a railroad do with a tired, worn out (yet historic) steam loco from an earlier timeframe, when scrap prices are too low to make it worthwhile to destroy right away? Why, send it to some lineside municipality looking to fill out a park and get a tax write-off to boot! Such was the fate of a lot of older locomotives in the early 1900's, 20's, and 30's. (The 4-4-0 Texas of the The Great Locomotive Chase fame comes to mind in this regard.) Sadly, a lot of World War II scrap drives drove towns and cities to destroy historic engines and other pieces of our shared industrial heritage, causing irreplaceable pieces to be destroyed and untold damage to be done to others. In the decades following the 1940's, many engines were also destroyed by Mother Nature - left to rot in public parks until they were beyond saving and the cutting torch was brought in to put them out of their misery. Thankfully, not all was lost in these dark times! A lot were pulled from their pedestal and refurbished cosmetically, with shelters erected around them. Some very lucky few were even restored to working order for a new generation to enjoy the sights, sounds, ands smells of a living steam loco and a long-passed way of life. Now, onto the LEGO model itself. This modular-compatible plinth was born out of a idea to show off a western loco in a modern LUG layout without it looking odd. The locomotive portion of the model was heavily inspired by the famous C.P. Huntington 4-2-4T steam loco originally owned by the Central Pacific, which was at one point on a plinth very similar to this one. Thoughts? EDIT 7/19/23: Added new pictures, as I made the model modular-building compatible. Original pictures in spoiler:
-
I remade my magic school bus model into a school bus from an older time period (the 1940's) and I think I like this version better. There are some anachronisms (such as the swinging stop sign arm) that didn't exist on school buses in the '40s, but I am using Modular Building / Winter Village logic here: old fashioned vehicles and buildings, with some modern features strewn about when needed. Like many of my vehicle models the roof does not come off to get at the inside details, but then again, there aren't much in the way of details in there anyway. (Yes, the stop sign is printed wonky. There is nothing I can do about it.) Thoughts?
-
I got a copy of set 76388 - Hogsmeade Village Visit on Saturday the 5th of February from the LEGO Store in my town. It will be heavily modified to fit into my existing setup, with back halves added to the buildings, same as I did to set 10217 - Diagon Alley set and heavily inspired by the style of 10193 - Medieval Market Village (both sets of which I've owned for over a decade now!) for use in my early-to-mid 1900's-town. You can find all those buildings, along with a few more, below. The Leviathan Inn Here are the pictures of "The Leviathan", which is supposed to be a bar / inn of some sort, and was formerly known as "The Three Broomsticks" pub. This building has a newly added back half and revised details on the inside, including more bench seating, a few beds upstairs, steam heat, drink dispenser tap, and a much-needed cash register. Side note: One of the dark green windows is backwards in this picture and has since been rotated into its proper place. The rear of the model. Unlike the revised Candy Shop, this building opens up to 180 degrees, allowing for the building's inside details to be more accessible. The entire rear half is new, along with most of the building's furniture and all the printed parts. Inside on the upper floor is a few beds for weary travelers, with two beds and two chairs. The room also features a steam-heater modeled after the one in the 2008 Modular Building, set 10185 - Green Grocer. The lower floor has tripled it's seating with two more "picnic" benches. I also added a drink tap to the counter beside a cash register. (the latter feature was sorely missing from the original set!) Wonka Candy Shop This is a rebranded Honeydukes from set 76388 - Hogsmeade Visit with a back half to the building and a (NEW) second sales floor added on. The name WONKA will go over the front door in printed 1 x 1 tiles I don't have in LDD, along with quite a few other parts missing from this model. ...and yes, that's supposed to be Willy Wonka standing out front of the shop. Rear view of the building. (Wonka should really look into getting that roof fixed as you can practically see inside the attic!) Also, the building can only open up to 90 degrees for inside access due to the overhanging structure of the roof and a few other items. This store has everything; a wall of Everlasting Gobstopper's in the four flavors, Scrumdidilyumptious bars, Square Candies That Look 'Round, new-formula Fizzy-Lifting drinks, a Wonka chocolate fountain, Exploding Candy (for your enemies), Lollipops of all kinds, and many more items. (Ok, so I didn't design most of the items in here. square candies and the Gobstopper wall are all I added of consequence to the inside. The rest of the sweets are repurposed / duplicated from the set, but they ARE in there.) Octan Gas Station (and 1920's fuel tanker truck) Here is my WIP version of my gas station and early tanker truck. I added a back wall to the building, made it look more late 1920's / early '30's by adding painted wooden siding, and removing the Christmas-time items as were originally installed by the designer. Also, several printed items are missing in this picture that will be added later. (Thanks to my brother who gave me the new 32 x 32 road plate for this project.) The truck was originally from set 10222 - Winter Village Post Office, while the building is inspired by Brick City Depot's Winter Village Gas Station, which you can see at their website. The Captain's Daughter Tavern This English style tavern was built from set 10193 - Medieval Market Village, and expanded by my brother to have an inside staircase and a better chimney. Rear view of this building. The inside of the model features a Frog on the bar (for no real reason), a inside staircase, and a bunch of seating on the second floor. Their is a gumball machine on the second floor at the top of the stairs. Backwash Bros. Saloon This model was inspired by set 79109 - Colby City Showdown from the 2013 Lone Ranger theme. I turned the 1 story bank into a 2 story saloon, complete with two lift-away sections to access the inside. This picture is from 2015, and the "neon" Saloon sign no longer exists. The first floor features the bar with old fashioned cash register, and a staircase to more seating on the second floor. The second floor features more seats and a piano. This level was originally supposed to be a game room, filled with pool tables and poker dealers. Unfortunately, the room never happened as the space constraints left too little space to place figures. The Adventuring Surplus Store This building was originally part of set 10217 - Diagon Alley, specifically Ollivander's wand Shop. I added a rear to the building and redid the interior to have more of an adventure supply / military surplus store. The store is currently owned and run by Bob from LEGO Universe, and features a few items from the game inside. The rear of the store features the back door. The shop only opens 90 degrees instead of 180, due to the roof being in the way. Inside we have weapons of various origins, from deep space to the distant past. Upstairs is the clothing section, with several space suits and battle armor on display. My Sig-Fig's House This building was originally the Blacksmith's shop from set 10193 - Medieval Market Village released back in 2009. I got it in 2011, near the end of it's production run. It has been turned into my mini-figures house, complete with furnished interior. Here is the rear of the house, continuing the wooden patterns from the front. The inside of the building features a couch, bed and a pot bellied stove. Their is a staircase, which was completely missing in the original set. Johnny Thunder's "Adventurers, Inc." Office (and Johnny's car) This Adventurers model was inspired by my original Johnny Thunder office building from 2015. I modified it into a corner building with a tower like in set 10255 - Assembly Square.The building is modular, and comes apart into three sections: roof, second floor and main floor. This model is my actually second tallest creation, as it's shorter than Lord Sam Sinister's Mansion and only slightly taller than my Saloon. The lower floor features a cabinet from set 10228 - Haunted House and a 1920's style ivory phone borrowed from set 10218 - Pet Shop. A hat rack (also from the Pet Shop set) is next to the wall opposite the desk. The far wall features some treasure from Johnny and his friends many adventurers, such as the Golden Shield from "Orient Expedition", a T-Rex tooth from "Dino Island", a trident from the "Quest for Atlantis", the replica hammer of the Thunder god from the "Age of Ragnarok", the helmet of a dwarf from "The Search for Middle Zealand", and many others artifacts. the upper floor features Johnny's bed, a stove, table with root beer bottle, and a radio / record player. This concludes my buildings I've built since 2013 that I still have built, with more to come. A few of these pictures are from 2015 and 2017... but I'll let you guess which ones. Any Questions, complaints, suggestions, etc. are welcome!