Search the Community
Showing results for tags 'Superheroes'.
-
Lex Luthor has improved his LexBot and is ready to take on Superman again! With a fully loaded K-Cannon and a supply to last, he is ready to take on the alien once again! I did like the set from a while back, but mostly because it supplied some parts I could use to build something better. I can't recall if it stands taller than the original, but I have bulked it up and added armaments and armour. Then I swapped the figure from the set with the one from the promotional polybag from LEGO Batman 2. Comments, critique and etc welcome.
-
A MOC Narrated By Batzzaro Himself (With Comments By Me) Me Am Batzarro! Me Am World's Worst Dectective. I Built this MOC when I acquired Batzzaro. Me In Me Unnatural Habitat Me Without Me Signal I wanted a place for him to be properly displayed, along with my Bat Signal. You No Enjoy! FYI: I actually Build this. The background was too dark (stupid camera) so I had to remove it.
-
Here is my 'Harley Quinn's Pet Shop'. I copied some layout from [10218] Pet Shop. Front: Harley Quinn’s Pet Shop by Hay Core, on Flickr The Harley Quinn's motor bike is designed by LEGO video game. I copied it. 1st Floor: 2nd Floor: Roof: "Na na na na Come on Come on Come on I like it Like it" Thanks for looking. Comments and suggestions are more than welcome. The Street of Superheroes
-
2014 is nearly over and throughout the year we've have some great new sets for the Superheroes theme, but the question is, which has been your favourite. These can include the normal sets and UCS Tumber, aswell as any polybags you have particularly liked. You can either choose your overall favourite set or separate it between the two different themes of Marvel and DC, i think i will do both. Marvel - Milano Spaceship Rescue DC - Jokers Steamroller Overall - Milano Spaceship Rescue
- 32 replies
-
- Superheroes
- DC
-
(and 2 more)
Tagged with:
-
So I went a few weeks back the LEGO Store and bought all the Civil War sets and a few Micro Racers sets. And well you know those horrible stories you hear about it LEGO mishaps in production. For example that one time Louis Lane's face was printed onto the wrong head. Anyways I think my experience was a nightmare. I open up the Micro Racers: The Flash vs. Captain Cold set I was astonished to find that the set had a lot of problems. As you can see the list of problems with the set. For the Flash: No head or helmet... And the Powerboltz can didn't have any printing.: For Captain Cold: This is much worse... No head or parka... They sent the wrong color legs. And the freeze gun... Much worse the blaster is a piece I've never seen before and does not exist in any set. But the most disappointing I think is they sent me a fire piece, HE'S CAPTAIN COLD!!! So I had to contact the Shop online and ordered the parts but they won't be coming for a long time because they don't have spare parts in stock... Ya so I just thought I'd share my experience with all you guys! (And if someone could help me post the images that would help a lot, thanks!)
- 94 replies
-
- DC
- Superheroes
-
(and 2 more)
Tagged with:
-
Behold! The Dark Knights oldest and goofiest/awesome vehicle! I helped my friends brother build this awhile ago and mn I think it looks pretty cool. Enjoy! Whirly Bat (joint MOC) by Total BrickMaster, on Flickr Whirly Bat (joint MOC) by Total BrickMaster, on Flickr
- 3 replies
-
- batman
- whirly bat
-
(and 8 more)
Tagged with:
-
Hi all, Complete long shot but does anyone happen to be selling the 4 statuettes from the Helicarrier set? Iron Man, Captain America, Hawkeye and Nick Fury (I have the SHIELD agent). Last 4 I need to complete my Superheroes line up. I was after one on Bricklink which was a good price from the US and as they got my message somebody else purchased it . You win some, you lose some!
-
So this topic could be pointless but I wanted to put some of my ideas out there. The post ideas about what a character (if released) would need. So without further ado here we go: Mystique:This one http://tvtropes.org/pmwiki/pmwiki.php/ComicBook/Mystique Hair- AoU Black Widow Hair in Red Head-Medium Blue or Blue Printed Head Torso-Medium Blue or Blue Printed Torso Arms-Medium Blue or Blue Arms Hands-Black Hands Hips-Black Printed Hips Legs-Black Legs Captain America: This one http://tvtropes.org/pmwiki/pmwiki.php/ComicBook/CaptainAmerica Head-Blue Printed Head Torso-Blue Printed Torso Arms-Dual Molded Blue Top/White Bottom Hands-Red Hands Hips-Blue Hips Legs-Dual Molded Blue Top/Red Bottom I have a couple more but I'll wait a bit to post them. Also the variant of the characters are shown in the links as the first image. Happy Building!
- 4 replies
-
- Perfect
- Superheroes
-
(and 1 more)
Tagged with:
-
8 films in 8 days! LEGO Batman. Check it out and tell us what you think.
- 1 reply
-
- Batman
- Superheroes
-
(and 1 more)
Tagged with:
-
The Man of Steel fights The Incredible Hulk in this brand new video of test footage from my Lego Justice League / Avengers crossover project. Stay during the credits to see additional footage from the DC / Marvel Project!
-
After a post by a fellow member, I learned that 76021 was already in shelves at the Houston LEGO Store. What followed can be best described as "sheer joy." I had been looking forward to this set since initial descriptions surfaced. A Marvel set that's larger than 400 pieces? A set based on Guardians of the Galaxy, one of the comics on my pull list? I was sold. But did the Milano Spaceship Rescue turn out as well as I'd hoped? Is it truly "all that and a bag of chips?" Read on to find out... Name: The Milano Spaceship Rescue Theme: LEGO Marvel Superheroes Year: 2014 Pieces: 665 Minifigs: 5 Minifigures Price: USD $74.99 Minifigures: There are 5 minifigures included, 4 of which are exclusive. The Sakaaran appears in all three sets based on the film. I'll start with Star-Lord, the rebellious prince of Spartax. Star-Lord wears a maroon jumpsuit for space flight. His facial expressions are snarky and angry, similar to most of the other LEGO Marvel Superheroes. His hair is pretty common to find these days, nothing to get excited about. I am excited, however, by his new dual blasters. They're very accurate to the comics and to what we've seen of the film so far. He also comes with a helmet complete with hair! It doesn't look as bad as you might expect. He doesn't tower over minifigures, but it's fairly noticeable. And he has this gun... thing? I'm sure all will be explained in the film. Next up is Gamora, the most dangerous assassin in the galaxy and the daughter of Thanos, the Mad Titan. Her jumpsuit is basically the female counterpart to Star-Lord's, which makes them seem more like a team. Her hair is unique, and useful to MOCers wanting to create a punk rock/pop star. Drax the Destroyer, a being created with the sole purpose of killing Thanos, completes the Guardians included here. He is controversially grey, falling victim to what I'll call "concept art" syndrome, much like sleeveless widow's peak Mandarin. Drax is adorned with tattoos across his torso and on his arms. If you look closely, you can see little LEGO skulls. Neat-o! Ronan the Accuser, the Supreme Accuser of the Kree Empire, takes the role as lead villain, though he is much more (morally) grey in the comics. Only time will tell if the film will follow that characterization. He has a nice headdress that doesn't fold his cape up too much. He also wields the Universal Weapon and carries what I presume to be one of the infinity gems, or stones as they are called in the MCU. The Sakaaran appears to be a member of the Shadow People, the creators of the Old Power. He looks A-OK! Pretty menacing, but forgettable on the whole. His weapon is generic enough to be used for space themed MOCs. The Necrocraft Cockpit Open The Sakaaran sits at the controls... The engine Beauty shot! The Sakaaran ship, or Necrofighter in proper terms, is a nice inclusion. Menacing, swooshable, and equipped with two new spring missiles. The controls are simple, but at least they're there (I'm looking at you, Extremis helicopter...). The Milano Well equipped for any battle... I was surprised that the designer didn't include any of the new spring missiles. There's plenty of room underneath (as you'll see later on). They're super functional and I'm mildly disappointed that we didn't get any to add to the fire power of the Guardians. Thrusters The underside Just a quick note, it's nice that the big holes on the underside are covered by large thrusters. It's not perfect but it gets the job done. Rear view The interior Gamora's controls are a printed tile, previously seen in some of the Star Wars sets... Aurebesh lettering? Mark your calendars, everyone: Disney is planning a crossover. Might the Millennium Falcon meet the Milano? Seating (and a fire extinguisher) ...and some more seating! Are you "Hooked on a Feeling?" Get ready for lift off! Comparison with 6869 Quinjet Aerial Attack Conclusions... So that's the Milano! Overall this was a joy. The interior is great: spacious, plenty of seating, a very detailed cockpit, lot's of free clips. What's not to love? The window in the back is a nice surprise and gives it some atmosphere. Another nice surprise is the stereo! I imagine that'll be a bigger plot point in the film than we previously thought. Can somebody say: "That's momma Star-Lord's mixtape?" Back on track: The build was nicely paced, I was never bored. The ship is heavy and full of features so you feel like you're getting your money's worth. Both fighters are very swooshable. There are a smattering of new elements for the MOCers and the figures will leave all of the Marvel fans and kids happy. If I had some criticisms, they're that the wings take a little time to adjust because the ball joints are very close together so it was difficult to position them correctly. Also the lack of Groot as a potted plant is disappointing given how easy it would have been to include. Perhaps he doesn't have that ability in the film, only time will tell. But in the end... Playability: 10/10 (No spring missiles for the Milano, but the interior, swooshability, and Sakaaran Necrofighter more than make up for it) Design: 10/10 (I see no problems here. As I said before, the build is excellently paced and the Milano is very sturdy) Price: 9/10 (665 pieces is average for $74. It's forgivable though because the Milano is pretty heavy so you feel like you get your money's worth and there is so much playability) Overall: 10/10 (Don't delay come June 1!) Bonus As a little celebration of the LEGO Marvel Universe entering the cosmic realm, I took a group photo of all of the characters we have thus far...
- 67 replies
-
- Superheroes
- Marvel
-
(and 4 more)
Tagged with:
-
Hi was just thinking of about at this time what do you think is the best £/$ 20 superheroes set my personal belief is that it is the cap vs. hydra set but really wanting your opinions !
- 18 replies
-
- Superheroes
- batman
-
(and 1 more)
Tagged with:
-
Am sitting in my car on the way to London Westfield and was wondering what superheroes set I should buy , I've got about £70 and I would convert it into dollars but since the lego group rip off the uk by charging the same amount in pounds as it is in dollars it doesn't really matter . Personally I think I'm leaning towards the steam roller set.
- 8 replies
-
- Superheroes
- Batman
-
(and 1 more)
Tagged with:
-
This is my another modularized superheroes building. The building is based on '76018 : Hulk Lab Smash'. Some parts of Knowhere Escape Mission (76020) were used for the roof. I used most bricks from Lego store pick-a-brick except those products. It is a still work in progress. I need some plates and tiles to complete it. Front [WIP] Modularized A.I.M on Flickr Two-story building 1st floor The portal machine designed from 'Lego Movie' is updated. 2nd floor Taskmaster on Flickr Thor on Flickr The roof Thanks for looking. Comments, suggestions and grammar corrections are more than welcome. Here are other modularized buildings: Daily Bugle: http://www.eurobrick...showtopic=83150 Super bank: http://www.eurobrick...showtopic=83039 Fun house: http://www.eurobrick...showtopic=83074
-
I'm a huge Batman fan and was excited when they first announced that Batman would be joining the LEGO family alongside Star Wars and Harry Potter. I managed to collect a few sets from the original Batman theme but because I was young, I couldn't afford awesome sets like 7783 or 7785. (I still think the older Batcave is a lot better looking than the newer one...) I was wondering which Batman set my fellow Eurobricks users like the most. My favorite Batman set of all time is easily 7781 The Batmobile: Two-Face's Escape. The Batmobile that comes in this set looks like the iconic Batmobile from Tim Burton's '89 film. It even has the odd nose piece that is actually a launching missile! Batman looks very cool with the shiny gold bat symbol and utility belt on his torso; very much like Michael Keaton's Batman. The Two-Face minifig is also way better looking than the newer one. He looks very much like the Two-Face from Batman: The Animated Series more than Tommy Lee Jones' awful performance. Maybe it's just nostalgia that makes me like this set so much. I used to play with it for hours. That's just me though. What do you guys think? What's your favorite Batman LEGO set?
- 18 replies
-
- Batman
- Superheroes
-
(and 2 more)
Tagged with:
-
Hey guys! I just saw pictures of the new Lego Star Wars advent calendar and I'm still thinking why TLG doesn't release a super hero one as well. What are your thoughts?
- 2 replies
-
- Superheroes
- batman
-
(and 4 more)
Tagged with:
-
Hi everyone, I got a little bored being at home today so I decided to dream up a little game. Basically the game is the same as wheres waldo but you have to spot batman hiding among the Lego. As when i took the pictures i looked at them on my cameras little screen some are more obvious than they are suppose to be. Anyway if the games popular I will do some more, Also if anyone else wants to do some please go ahead. Starting with the most obvious... After yet another Breakout at arkham batman needed some downtime, Unfortunately in the lego world its hard to get away from the prying eyes of the man upstairs. Wheres batman??? by Legocollecter123, on Flickr What better way to get away from it all than on a nice peaceful cruise.... Or not... Wheres batman??? by Legocollecter123, on Flickr Maybe bats can find some solitude in middle earth? Wheres batman??? by Legocollecter123, on Flickr They will never spot me here. Wheres batman??? by Legocollecter123, on Flickr This one wasnt such a good hiding place Wheres batman??? by Legocollecter123, on Flickr He never really wanted to be a vigilante. Wheres batman??? by Legocollecter123, on Flickr "A nice forest retreat they said" Wheres batman??? by Legocollecter123, on Flickr Back home to Gotham Wheres batman??? by Legocollecter123, on Flickr Please do let me know what you guys think, Enjoy.
-
Please support at https://ideas.lego.com/projects/63155 :laugh: "Focus up ladies. Good evening, and welcome to the birthing suite. I am pleased to announce the imminent arrival of your bouncing b@d@$$ baby brother." - Tony Stark This is my rendition of the Hall of Armor, reproduce in 2 minifig scale and staying as close to the original design as best I can. Hopefully with your support this can be owned by many other enthusiast! If you like what you see here, don't forget to check out my other projects: https://ideas.lego.c...ects/58144 https://ideas.lego.c...ects/58146 Details of the single modular unit, designed to be combined into a set of 7. Set of 7 with movie accurate Iron Man suits design, starting with Mark I to Mark VII. Note the single wall in between each modular unit. Should the budget allows, a full set equipped with the center circular stage can be included. Of course, it would be best if the budget allows for the inclusion of Dum-E the robotic arm and the rest of the equipments, allowing fans to recreate the iconic movie scene. Please support at https://ideas.lego.c...cts/63155 :laugh:
- 11 replies
-
- Iron Man
- Tony Stark
-
(and 8 more)
Tagged with:
-
I saw one of these kind of pages for Batman so I figured why not do one for Flash. I'm looking for ways to make Flash's villains to go along with a MOC - Flash Museum. Any ideas are welcome and do not have to be purists.
- 20 replies
-
- Flash
- Barry Allen
-
(and 6 more)
Tagged with:
-
eliza' florist inspires me to create this building. eliza' florist: http://www.eurobrick...showtopic=91046 Here is my 'Poison Ivy's Florist Shop'. I copied some layout and floor tile pattern from the eliza's florist. Most of bricks are from Lego store pick-a-brick so, the building looks like a 'LEGO Friends' building. [MOC] Poison Ivy’s Florist Shop by Hay Core, on Flickr Front and Side A signboard shows I V. I can not put Y on the board. Back and Side Does poison Ivy need stairs? I don't know. I just put a cheap ladder. 1st Floor The building is disguised as a normal florist shop. Ivy's henchman is a count clerk. 2nd Floor Ivy's room on the second floor. I copied the design of candles and a display case. The problem is I can not remember where I saw them. I'm sorry I can not cite it. Roof Poisoned flowers are grown on the rooftop garden. Do not buy them. Thanks for looking. Comments, suggestions and grammar corrections are more than welcome. Super Heroes X Modular [MOC] Street of Superheroes by Hay Core, on Flickr
- 9 replies
-
- MOC
- Poison Ivy
-
(and 1 more)
Tagged with:
-
With the Release of LEGO: MARVEL Superheroes on the way I thought it was time to make an Agent Coulson Minifig, cos this universe needs one! So inspired by the new series of 'Marvel's Agents of Shield' being broadcast and what references on LEGO Coulson exist, that's what I did, along with a few members of his handpicked task-force to accompany him. Agent Coulson Leo Fitz Jemma Simmons Click on any image to go to my Flickr Page, where the full size image can be downloaded for your enjoyment! (Colours may appear a little strange on-screen, this is because they are designed for printing, so they should appear correct when printed) :) If you do use this decal, I would love to see how it turns out and where in the universe it ends up. So do send me a link to any pictures or MOCs you have either through Flickr or any of methods on the bottom of the image, enjoy! This Decal is for Personal Use Only! This Decal is NOT for Commercial Use!
-
Superheroes teams up for some construction work. Spider-man´s spider sense is not what it´s used to be.....
-
- Spider-man
- Superheroes
-
(and 5 more)
Tagged with:
-
This is a MOC I have been meaning to make ever since I got Clark Kent but only got around to making it recently. It is a rather simple build; Clark with some accessories, and the phone booth. But I think it is nice all the same. Unfortunately, I didn't have enough clear 1x2 bricks to make it all around But besides that, I think this is a good MOC. But what do you think? C&C welcome.
- 14 replies
-
- MOC
- Superheroes
-
(and 4 more)
Tagged with:
-
EDIT: FIXED! Images are now up on imgur! So I have a bit of a story: I have the Damian Wayne Robin minifigure and I thought it'd be nice if he smiled for once, so I decide to buy the Juniors Batcave set for parts, the bright blue Batman, and Robin's face that has a similar design to Damian's, except it has two new expressions. Of course, with my luck, the set I bought just so happened to be missing that Robin head, so I used the replacement parts service on LEGO's website, and within a few days, it arrived. However, I think I have a whole new face print. http://i.imgur.com/95Cyi13.jpg?1 Normal face currently available to everyone http://i.imgur.com/nunObDS.jpg Its unique alternate expression http://i.imgur.com/NhP5WJy.jpg Comparison with other expressions, very bottom head is the unique expression. I like it. It reminds me of a scared Emmet, and It's very different to what I should have received. Here's a result from a quick search on Google, for those who either don't have the set or don't know what I'm talking about. I've heard of misprints such as designs on wrong colored pieces and designs printed with wrong colored inks, but not anything like this, as well as the fact that LEGO sent me this "misprint" through its replacement service So what do you guys think? A new print for next year accidentally released early? A rejected print? Has anyone else ran into something similar?