Stephan

This should have been the one with Egyptian hieroglyphs. I'll fix that tomorrow. I'll fix this tomorrow. This is probably due to a too large colission sphere. I will re-upload my version tomorrow.

You need to be in Extended mode. In Mindstorms mode the Decoration Tool does not work.

Fix is issued. You can download it again.

Which pieces? I can create a fix tomorrow.

Added version 20221229: LINK. I noticed some posts in the forum which I have missed previously; I will include those fixes/parts in the next update. This version includes 98 new parts, 46 updated parts, 213 new decorated parts, 1 new color, a new version of the 2020NewPreColoredParts palette and a new version of the DecorationMapping! Even though the parts are thoroughly checked, you might still encounter unforeseen problems during some builds. If that is the case, please let me know. For which parts are you most excited? Enjoy

Development Version 20221229 Version 20221229 or GitHub [download files separate] and LXF file with new and updated parts New parts 1411 —— Corn Cob with Husk [BL: 1411*] 1745 —— Plate, Round 1 x 2 Half with 1 Stud (Jumper) 1746 —— Tower Roof 4 x 8 x 6 Half Cone Shaped with Roof Tiles 1747 —— Plant Stem / Stalk with 2 Leaves and Bar Attachments 1748 —— Tile, Round 1 x 2 Half — decoratable 1749 —— Support 2 x 4 x 13 Semicircle with 5 Pin Holes 1750 —— Slope, Curved 2 x 2 x 1 Inverted with 2 Recessed Studs 1751 —— Tile 4 x 4 — decoratable 1871 —— Slope, Curved 1 x 1 x 1 1/3 Corner [BL: bb1284*] — decoratable 1874 —— Windscreen 6 x 9 x 1 2/3 — decoratable 1936 —— Technic Turntable / Swashplate 5 x 5 Top with 5 Pin Holes 1937 —— Technic Turntable / Swashplate 5 x 5 Base with 4 Pin Holes 1938 —— Technic Ball Joint Swashplate with 4 Grooves and Square Hole 2008 —— Hair Mid-Length Swept Back with Ruffled Back 2010 —— Minifig Headwear Hat Brimmed 2012 —— Minifig Neckwear Breathing Apparatus (Cad Bane) 2016 —— Minifig Neckwear Armor Shoulder Pads Rounded with Neck Protection and Clip on Back [Plain] 2387 —— Technic Panel Fairing #7 3L Very Small Smooth, Side A — decoratable 2389 —— Technic Panel Fairing #8 3L Very Small Smooth, Side B — decoratable 2391 —— Technic Beam 1 x 7 Thick with Alternating Holes 2393 —— Technic Pin Connector Hub Perpendicular 3L with 2 Pins 2395 —— Technic Panel Fairing #9 Medium Triangle Smooth — decoratable 2403 —— Technic Panel Fairing #10 Medium Triangle Smooth — decoratable 2457 —— Technic Panel Fairing 2 x 3 x 1 #3 Angled — decoratable 2459 —— Technic Panel Car Mudguard Arched 9 x 2 x 3, Arched Top #42 — decoratable 3704 —— Technic, Axle 2L 4350 —— Electric 4.5V 3 C-Cell Battery Box without Switch 4 x 22 — multi-colorable 5840 —— Technic Bush with Lip [BL: x1299] 18821 —— Minifigure, Head, Modified Manta with Air Tank — multi-colorable, decoratable 22168 —— Electric, Light Unit Powered Up Attachment — multi-colorable 24219 —— Minifigure, Head, Modified SW Ugnaught — decoratable 25508 —— Minifigure Skirt Cloth 3 Truncated Points Partial Wrap 26990 —— Minifigure, Head, Modified with Flaming Hair — multi-colorable, decoratable 28657 —— Minifigure, Utensil Goblet [transparent] 30101 —— Door, Frame 2 x 8 x 6 Swivel with Bottom Notches 30102 —— Door 2 x 5 x 5 Swivel, Flat Base — decoratable 35157 —— Glass for Train Door with Lip on All Sides 35635 —— Minifigure Armor with 2 Flaps over Shoulders 35701 —— Minifigure, Hair Short, Parted with Two Pigtails, Hole for Pin on Top 36060 —— Minifigure, Hair Coiled and Short 36481 —— Technic, Gear 24 Tooth with 3 Axle Holes [BL: x187] 36756 —— Rat / Mouse — decoratable 37614 —— Minifigure Armor Shoulder Pads Ridged 37619 —— Minifigure, Headgear Helmet SW Range Trooper — decoratable 37631 —— Minifigure, Headgear Helmet SW Enfys Nest — multi-colorable, decoratable 38547 —— Dragon Wing 8 1/4 x 5 — multi-colorable 42819 —— Door 1 x 4 x 5 Train Right, Thick Support at Bottom 43967 —— Door 1 x 4 x 5 Train Left, Thick Support at Bottom 44511 —— Tower Roof 8 x 12 x 10 Onion Dome 48267 —— Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] 50335 —— Vehicle, Digger Bucket 7 Teeth 3 x 6, Rise Inside with Locking 2 Finger Hinge 54662 —— Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers on Ends, 7 Teeth, with Hole 61520 —— Windscreen 6 x 4 x 1 1/3 without Bottom Tabs and with Solid Studs [BL: 6152b] 64872 —— Technic, Steering Arm 5.5 x 2 with Towball Socket Rounded, Chamfered [Reinforced] 67737 —— Propeller 4 Blade 5 Diameter with Rounded Ends and Closed Hub 67929 —— Plate, Modified 8 x 8 with Cut Corners, Raised Sides and 4 Feet 68327 —— Wheel 41mm D. x 15mm Technic 68547 —— Wave Rounded Straight Swirls with Bar End (Cloud / Wind Gusts) 69754 —— Projectile Launcher, 1 x 2 Mini Blaster / Tile Shooter 69755 —— Projectile Launcher Part, Trigger for Bazooka, Mini Blaster / Shooter 69761 —— Technic, Gear 22 Tooth Bevel 69762 —— Technic, Gear 14 Tooth Bevel Thick 69767 —— Minifigure, Weapon Bazooka, Mini Blaster / Shooter 71603 —— Electric, Light & Sound 4 x 20 x 5 Insectoid Stinger [BL: x239] — decoratable 72514 —— Belville, Clothes Crown Mini [BL: x250] — multi-colorable 73389 —— Wheel 75mm D. x 41mm Technic Racing Large #1 Model Left Side (Spokes Slanted Left) 73398 —— Wheel 75mm D. x 41mm Technic Racing Large #2 Model Right Side (Spokes Slanted Right) 77107 —— Support 11 x 11 Girder, Round 77127 —— Figure Base Luigi with 4 Top Studs and LCD Screens for Eyes and Chest — multi-colorable, decoratable (note: since the decoratable surfaces are behind the screen glass, you can only decorate this one through the 2020 New Pre-Colored Parts palette) 77834 —— Brick, Modified 2 x 2 x 5 with 2 x 4 Plate Base, Spring Unit, and 2 Technic Holes [BL: 80432c01] — multi-colorable 78645 —— Minifigure, Headgear Helmet with Horns, SW Mandalorian — multi-colorable, decoratable 80273 —— Technic, Liftarm, Modified Rotor 5 Blade with Square Hole 80274 —— Technic, Panel Curved #62 5 x 4 Tapered Right 80278 —— Technic, Panel Curved #63 5 x 4 Tapered Left 80279 —— Tire 87.9 x 44 80319 —— Plate, Modified 8 x 8 with Double-Sided Adhesive Tape on Back [BL: 79759c01] — multi-colorable, decoratable 80326 —— Flag 2 x 2 Square with Flared Edge — decoratable 80477 —— Technic, Pin with Bar and Tow Ball, 3L 80543 —— Arch 1 x 4 x 3 80563 —— Technic Rotation Joint Disk with Pin Hole and 2 Pins 80677 —— Tile, Round 2 x 2 Splat with Side Extensions — decoratable 81346 —— Technic, Gear 20 Tooth with Clutch on Both Sides 81911 —— Windscreen 2 x 4 x 1 Curved 84867 —— Legs with Plate Round 2 x 2 and Axle Hole - 4 Feet 86368 —— Minifigure, Hair Female Long Tousled with Center Part 88105 —— Minifigure, Head, Modified SW Ree-Yees — multi-colorable, decoratable 90826 —— Minifigure, Utensil Broom Bristles with Stud Holder 98878 —— Windscreen 10 x 4 x 2 with Bar Handle 100560 —— Neckwear Cape, Pauldron, Tattered 100646 —— Minifig Neckwear Armor Shoulder Pads with Clip on Back — decoratable 107700 —— BBB Train Wheel XXL Flanged Driver 43.2 mm 360831 —— Minifigure, Weapon Web Effect, Long and Narrow, Bars at Both Ends [BL: 36083a] 360832 —— Minifigure, Weapon Web Effect, Handcuffs [BL: 36083b] 360833 —— Minifigure, Weapon Web Effect, Medium, Bar on Back [BL: 36083c] 360834 —— Minifigure, Weapon Web Effect, Small, Short Bar on Front and Back [BL: 36083d] 360835 —— Minifigure, Weapon Web Effect, Large, Bar on Back, Bar Handles on Sides [BL: 36083e] 360836 —— Minifigure, Weapon Web Effect, Two Branches, Bars on Each End [BL: 36083f] Original parts — updated parts Custom parts — updated parts Original / Custom parts — decorated parts New colors New assembly • 77127 (9324, 58213) • 22168 (25452, 25450, 62498, {23816}) • 77834 (80432, 80433) {} = original LDD part Updated original parts • Updated connections: 4035, 32828 • Updated collision data: 3029, 3034, 3068, 3623, 3666, 4282, 15395, 15461, 26047, 32828, 48989, 54200, 60477, 87580, 99781 • Added decoration surface: 4515, 24119, 27925, 28946, 28948, 28949, 32316, 60581, 64799 • Updated decoration surface: 2723 • Updated 3D model: 6152, 24119, 30410 Updated custom parts • Updated connections: 2711, 2719, 4261, 4262, 4263, 4442, 26559, 32828, 49309, 67440, 69066, 86876 • Added decoration surface: 35700, 49311, 71682, 89679 • Added collisions: 25195, 26559, 35464, 49309 • Updated collisions: 37352, 69958 • Updated 3D model: 4263, 25195, 80222 • Updated name: 26559, 35464, 49309, 67440, 69066, 79393 • Changed default camera angle: 71682 Other notes:

I have not yet seen 3D models for these parts. So perhaps in the (near) future.

This will be fixed eventually, but not for the next update since it doesn't influence custom decorations or official ones. But it shall be fixed for the update after the next one.

It is already included for the next one :)

Yes :) i have two weeks off from work, so expect it somewhere in these 2 weeks ;)

First we have to check the consequences. If all decoration files need to be updated, it might not be beneficial. No real minifigure torso part is printed to the edges.

Thanks! I actually did not disable physics/colissions. I had to update some colissions since the underside of plates is often used by a corner of another piece.

That should be a relatively easy fix then.

I need some advice on the connection between 1936 and 1938. Maybe the sphere connection will be the best? Or a hinge? Fixed

I did it by trial and error this time and had to re-do the lower legs 3 times because I messed up the dimensions of the inner/upper connections...

@jester, is the above problem something we can fix in de UV map?

I am working through the older parts without colissions. But they will be distributed across multiple updates. New parts will always have their colissions though.

Sorry, no update date yet. I hope to be able to give you guys an early Christmas present.

Yes, it is :)

I have not had this problem in any builds I did. But I will double check. Yess! Will be added. There might be an update to the 3D model, but that will be no issue.

No, they are not added yet. I fix parts when I build the sets. And untill release they are waiting until I upload them to Github/Patreon or until I create the update :)

I build it as well and can confirm that most of these errors are fixed.

I already added this one for the next update. Will be there a well :)

@polymaker, Do you know if it is possible to add 2 wire marker annotations to a part? I am working on the new LED lights and the middle part should use two wire markers. Maybe a way to cheat it? While writing this I thought of an idea... I can split the centre part in the upper and lower sub-part...

They show where and in which size to place decorations.