Jump to content

DrJB

Eurobricks Dukes
 View Profile  See their activity

  • Posts

    3,006

  • Joined

  • Last visited

 Content Type 

Everything posted by DrJB

  1. DrJB
    I'd have to agree that the older 'studded' sets were more 'difficult' to build. These include both the 8880 supercar and the space shuttle 8480. There, the build steps were in 'layers' and it was often difficult to 'see' the differences from one step to the next. There, it was 'imperative' to collect all parts for each step, to make sure none is forgotten. Plus, the 'studded' look made it very difficult to 'discern' the drawings.
  2. DrJB
    You're absolutely right. The instructions did get updated and look fine. Though I think the front cover (POV render) still shows gears with an incorrect offset. Not many people would notice those as well. Also, I somehow have an LDR file and it has the incorrect offset in it as well. one would notice that of course. There is an Akiyuki Rainbow Wave module? ... I thought such module was done by someone else, but he was 'inspired' by Akiyuki. Can you put the link to the module you're referring to?
  3. DrJB
    Also, what's with this part? It used to be rather cheap but now, because of Akiyuki's modules (invisible lift & planets), it's about $0.30 each? Supply and demand again?
  4. DrJB
    I was going through some of the instructions (commendable work, Blakbird et. al.) and I found a tiny/minor error in the cup-to-cup module. The five gears to the right are placed 1M higher than they should be, and as such, they do not mesh with the center gear. This might have been addressed before but, just in case. Cheers.
  5. DrJB
    Nicely done, thank you. I've seen technic sets evolve over the many years and I'm not sure I prefer the 'paneled' look. I'd rather have the lines somehow 'defined' yet an open interior with a lot of functions. Bu, that a whole other discussion. Also, I wonder how this compares when sat next to 8450, sizewise. The pictures below are not to the same scale, obviously. Anyone has both and can take a photo? Incidentally, the color schemes are 'close': light blue + black vs. Turquoise + black. vs.
  6. DrJB
    For 'spring' suspensions, there are few parts as shown below. It all depends on how long ago you started buying lego and how many parts you have collected. Some parts came up in single or few sets (e.g 8448, 8466) and are more difficult to get. The whole list is here: https://www.bricklink.com/catalogList.asp?catType=P&catString=141
  7. DrJB
    The blue piece came in the Mindstorms Vision Command (below) and other sets. It is just connector and works well with another part. + I have not found much use for the blue part over the years. Maybe the best way to see how many of these pieces (in OP's original post) are used is to build the camera support module (you do not need the camera), that has pan/tilt, in set 9731
  8. DrJB
    There are few options for suspension arms and spindles, though only very few exist in LDD. SO, what is the exact issue you're facing: What parts exist in LDD? ... or what options are there in real life?
  9. DrJB
    About 200k for Technic. Double that if I include Non-Technic (e.g. Classic, Friends, Elves, Ninjago, Bionicle, Chima, FLL ...). Just like NYChase, I think it's about time to offload and recoup usage of one bedroom.
  10. DrJB
    As to understanding why it works, it's just few sinewaves (projection of blob trajectory onto horizontal plane) whose frequencies are slightly off ... at times they're in phase, at others not, and then anything in between. I'm tempted to do an LDD model and would appreciate few static shots. A while back (~10 years) I bought 10 differentials from Lego.edu with big hopes/dreams to do something useful with them. This project is just it. Where else can you use that many differentials? Well, maybe this marvel and the Lego Antikythera (can't find the link now)
  11. DrJB
    Nicely done. The only concern I would have is that the tracks typically do not generate enough friction. As such, maybe some rubber inserts (as those that came in the EV3 Extension Set) might help here.
  12. DrJB
    This would be my most sought-after set. Alas, not looking seriously these days, but still has a spot for it next to my other cars (not as many as BlakBird's though). I was not much into collecting back then, but this set was on sale on TLG for $100 only, for several weeks. Of course, this was before the entrepreneurs from eBay got on board with hoarding/collecting/investing/speculating in Lego Technic.
  13. DrJB
    Thank you, got it.
  14. DrJB
    LOL ... typo corrected. I meant 8043 and 8455. Though, maybe it's true I can't pick from 8043 and 8043, because I have 2 copies of the set Also, we see many such topics ona regular basis. I think this topic should have a 'voting' section, so we get to see what's the all-time favorite set.
  15. DrJB
    LDD does not have ALL parts, however you can build 'look-alike' as in old pneumatic parts. LDRAW is the most powerful of all available, but the learning curve is a bit steep. Also, LDD is very strict on 'collisions' and illegal builds. That said, it is very interactive and its 'snap' feature makes it my choice for entry level. I'd say start with LDD< and once you've learned of its lmitations, you can then 'graduate' to LDRAW. I haven't trie stud.io yet so can't comment on it.
  16. DrJB
    Only one hour ago and now, it seems the 'special' is gone?
  17. DrJB
    Can't pick just one. I'll have to name both 8043 and 8455. The functions and realism (to me) are second to none. Everything else seems 'toyish' compared to these two. They're also the first two sets that made 'full use' of both the LAs and pneumatics.
  18. DrJB
    Soak them up in hot soap water
  19. DrJB
    You've made an excellent rendition of a very popular and a best-seller in North America (no one really likes green, that blends with the crops). If you send it to me, I promise I'll have it displayed in the Company's Headquarters ... ;)
  20. DrJB
    Those trans-blue cylinders came from the 'Pneumatic Add-On' to MIndstorms, from Lego Education. Those cylinders are very pricey, hence the asking price for the eBay listing. https://education.lego.com/en-us/products/pneumatics-add-on-set/9641
  21. DrJB
    Like many on here, I'm a purist and would not consider any 3rd party parts. However, it seems to me you've made a single design and 3d printed it in multiple colors. If you want to 'convince' would be backers, you'd need to show multiple designs/capabilities/styles. So far, everything you've shown is, well, not very interesting. Sorry for being blunt, but it's an honest feedback. Good luck with such endeavor. One last note: I think it's this site policy not to allow 'self-promotions', such as for a kickstarter projects ... but I could be wrong.
  22. DrJB
    Let's not be judgemental ... there is a fine line between 'ignoring' and 'missing the point'. One is pre-meditated, the other is an honest mistake. I came here asking for options/opinions, not asking to be lectured. You saying I ignored is like Shelly (cust service) saying I violated their rules. No, I did not violate any rules. In fact, violate is a very strong word to use ... but it's ok, I bet English is not her native tongue ... but I'm digressing here. Everyone else, thanks for the helpful feedback.
  23. DrJB
    It's not $9 ... those are expensive sets (Williams F1 Racer) ... and the fees added up to over $50.
  24. DrJB
    Very simple: It takes a lot of development to come up with the intelligent brick. But keep in mind that TLG in this business to make money (nothing wrong with that), not to make affordable toys.
  25. DrJB
    The visor was released in Trans-Blue and Trans-Purple in some old Bionicle sets, but only in white in a Marx Exploration vehicle. I bought 50 of those buckets and been wanting to do a bucket wheel excavator a while back. That project is still on back burner, but now ... maybe time to re-visit. http://www.bricklink.com/v2/search.page?q=7645#T=A
×
×
  • Create New...