Jump to content

1gor

Eurobricks Grand Dukes
 View Profile  See their activity

  • Posts

    7,906

  • Joined

  • Last visited

 Content Type 

Everything posted by 1gor

  1. 1gor
    @Idris first of all you are welcome; as new member it is completely normal to get informed and the fastest way is by making topic. I'm in Croatia as you can see from my avatar (profile picture) Kind regards and i wish you to have successful bargain.
  2. 1gor
    ...as you can see rear mudguards and compressor are in place so next step is to make proper cab (it will be similar to cab from first Fastrac version ) ...and I'm using dishes 6 X 6 in yellow
  3. 1gor
    @Idris, there is on closest to you, but I do not know your price limit. Here is a link https://store.bricklink.com/serhan?itemID=164327512#/shop?o={"invID":"164327512"} For shipment outside your country you must realize that shipment itself is more expensive and If you pay via bank there is higher provisioning...so it is important to calculate all possible expenses. Good luck
  4. 1gor
    And lasted two days I think most complicated for me to build was 8880 because it was the first time to use transmission driving ring, but now I have more experience...
  5. 1gor
    Very nice and interesting MOC as usual from you
  6. 1gor
    I mean several sellers. Carsten thank you for rapid answer.
  7. 1gor
    ...but the most important is Vanessa... About green color I have for about 2 such models posted on brickshelf (it is my old folder...) http://www.brickshelf.com/cgi-bin/gallery.cgi?f=535335 My first intention was to make CLAAS Jaguar when Xerion came out, but I could only think about it later when Liebherr will be available with DBG sprockets...so bunch of white, lime and dark bluish gray parts is useful IMHO... Tracked racer is some 26 studs long and 15 wide (based on my calculations as result of studying instructions booklet). Unfortunately I do not have Corvette so I can not make photo of both for better comparison. Regards
  8. 1gor
    @sirslayer (or should I say Vick ) track would be at the front and it should be green with yellow (John Deere) since I have 42095 set. Inside it would be based on frames because it is lighter and more sturdier combination...it will have 4 functions, but first after Fastrac update I'll have to see how to manage all wheel? Drive, actually to make both drive at tires and tracks...
  9. 1gor
    I do not know if it has been answered before, but does anyone know in which set(s) black axle 3 with stop is coming from? There are several on BrickLink on sale https://www.bricklink.com/v2/catalog/catalogitem.page?P=24316&idColor=88#T=S&C=11&O={"color":11,"iconly":0} Thanks
  10. 1gor
    I plan to make fully RC combine harvester with front tracks and rear tractor wheels (in the future)
  11. 1gor
    That is best solution IMHO Fastrac chassis with axles looks like this ...and with battery box and gearbox... There are also rear mudguards attached, but did not take photos yet...
  12. 1gor
    @zoo I think your idea is the best way...btw my Fastrac chassis looks like this
  13. 1gor
    Hi, STX uses steering powered by hydraulic cylinders each on right and left side as you can see on image Because there were no linear actuators at the time I have build this model I use gears for this purpose. I suggest you to use 2 small linear actuators and big turntable for rear axle oscillation. My second Fastrac version is going on as I planned. Right side with 2 main function is finished; one for both pto and one for compressor which will be on left side...rear right mudguard is finished and from tomorrow I plan to work on left side...main thing that I did not decide yet is wether to use medium size (48mm) pneumatic cylinders at rear or small ones like on front. Benefit of new version is better steering simpler functions and less parts used (automatically model is lighter). Cab will be the same (of course more realistic without battery box below drivers megablocks ). Good will be more flat and most important I'm waiting for some yellow axles to arrive and have found yellow dishes 6 X 6 which I'll be able to purchase next week, so at about 5th may Fastrac could be finished. Regards
  14. 1gor
    New red differential and new red gear 16t with clutch do not work together so well as dark bluish gray combination due to symmetrical design of red gear with 16 tooth...
  15. 1gor
    @Mechbuilds I suggest you to get Android based mobile phone so you can easily upgrade it to newer version that is working with PC...at least I have decided not to use iPhone and bitten Apples Good luck
  16. 1gor
    Very original MOC. Since I'm (technologically more influenced with "western" technology) I didn't know that something like this exist. On other side it is very special MOC and it looks that it has high playability level
  17. 1gor
    That is perfect because set is great parts pack.
  18. 1gor
    To make all functions RC is interesting challenge, but end-result could be great surprise...not to mention to make suspended axles...
  19. 1gor
    @Zerobricks usually tires for discovery have 740mm overall diameter, but LEGO has no tire with 74-75mm and 81.6 looks (to me) to big... And I do not think that LEGO will use futuristic wheels which are closest to that... Knowing LEGO it is very hard to expect new tire for racing wheel small to fit scale perfectly.
  20. 1gor
    Just one thing comes to my mind if scale 1:10 is certain; tires should be some 68mm, but which one? ...or perhaps new tires?
  21. 1gor
    So far yes (classic Landy has suspension similar to rock crawler set - 41999 or 9398), but classic discovery had life axle and new has independent suspension (if I understand my mechanic correctly), so some kind of standardisation is possible with new Discovery
  22. 1gor
    With wheels? Could be something similar, but (at least) I don't know what kind of suspension will it have...
  23. 1gor
    I do not know what you will recreate, but when I had idea for Duisenberg bumper the part that crossed my mind was using this hose: https://www.bricklink.com/v2/catalog/catalogitem.page?P=78c11&idColor=95#T=C&C=95
  24. 1gor
    Your post fits perfectly to Bugatti
  25. 1gor
    Do not get me wrong, but sometimes less is more; at least IMHO when I make good looking moc and major (characteristical) features included is better than to have very much function and complex and disproportional construction.
×
×
  • Create New...