Jump to content

Jayden

Eurobricks Citizen
 View Profile  See their activity

  • Posts

    143

  • Joined

  • Last visited

 Content Type 

Everything posted by Jayden

  1. Jayden
    really happy with 26th place, that is 4 places higher than I was expecting doc_brown claimed this in tc5 (yes I looked through the index) though MajklSpajkl was 2nd
  2. Jayden
    I love these little trucks and forklifts! I will have to build them someday.
  3. Jayden
    it is too!
  4. Jayden
    that makes sense since the battery box can be reversed.
  5. Jayden
    10: 10 17: 6 29: 4 30: 3 14: 2 15: 1
  6. Jayden
    yes I don't mind this set.
  7. Jayden
    it should work you could hook up both motors to the different X and Y values, then by moving it 45° you could operate both motors but I am not sure if this is what you are looking for. PS can you please post some photos of your modded 4x4?
  8. Jayden
    very cool mechanism
  9. Jayden
    Interesting looking mechanism for the compactor, but I cant see it in action if that's what the big empty space near the bottom is for.
  10. Jayden
    I am not sure, it sometimes works but i tried it quite a while ago with a very old iphone. You could calibrating the 2nd port first. You could try using the two motors hooked up to the same slider. this might come out soon too. maybe? hopefully? what controller do you have? I hope this is sorta helpful.
  11. Jayden
    the ability to code opens up lots more possibility and the C+ app is good too
  12. Jayden
    pu L x2 for steering mounting them on the axle + the ends on the wheel hubs then hooking a motor up to extend and retract them making the steering more precise. That was a basic explanation but i can provide more details if needed i would use joy 1&2 for steering and L2&R2 (PS4 controller) for drive
  13. Jayden
    very nice crane but i think you need an entry number - 25 in the entry topic
  14. Jayden
    You are most welcome.
  15. Jayden
    I have had successes by calibrating port 1 then hooking up port 2 and calibrating again then it knows the position of both motors. You could also try linear actuators for steering. You could also try brickcontroller2.
  16. Jayden
    It is this
  17. Jayden
    you can use your keyboard for remote control with pybricks shown here
  18. Jayden
    2. Mining Truck Functions: RC Drive. RC Steering. RC Bed tipping using mini LA's. Pendular suspension. Dimensions: H X L X W: 19x 26 x 19 = 9386 cubic studs. I have made a stud.io file which can be downloaded here
  19. Jayden
    It does a calibration in the select the port that the motor is driven of and then it works according to the endpoints. So it will work.
  20. Jayden
    Indeed I have tried but it is very hard and I didn't succeed. All it did was slow the motor down. True, I usually use a pretty durable "string"
  21. Jayden
    Pretty well actually, I made a garage which used a long gear rack to raise and lower the door with this code: No the zero would be the middle but zero is also the middle of the slider. Yes, yes, yes. True. But if there is two winches and the elevator in the middle that would also work.
  22. Jayden
    Using the controller button to toggle black screen mode would be interesting too.
  23. Jayden
    Correct. it actually works pretty well. Using the calibration block and then the slider+x blocks instead of the loop block would work
  24. Jayden
    Something like this could work for that scenario: This is probably true.
  25. Jayden
    it is possible it is set to run the motor 10 rotations when button "0" is pressed and when button "1" is pressed it will set the motor back to the 0 position
×
×
  • Create New...