GerritvdG

Cool transformation, there is a lot going on in that compact chassis. I like the wobbling mechanism!

Well done! The first two versions scored >95% with my limited collection of 9 sets. However, I’m not interested in buying instructions for these relatively small sets. I’m not sure about others, what’s your experience?

Cab looks perfect! Really cool idea and the moc looks great, can’t wait to see the transformation..

Very cool, well done!!

Very cool MOC and transformation! Not sure if it exactly fits the contest, too many motors and is it a vehicle? It looks like a vehicle, but the build is more like a sculpture. However, hopefully it inspires to create great submissions for this contest!

Thanks! That's a good one, I have to think about it. It has some impact on the front part, because it has to be build on top of the M-motor, but I can't build anything on top of the 2*4 liftarm because that space is needed for the robot in folded position Another thing, below a detail of the front axle with a M-motor acting as servo. I wonder, is there a better way to assemble the marked connection? It was important to make this front-part as compact as possible to stay true to the original, so I used 6 studs for the M-motor and 3 studs to connect everything together (length)

This project is fun, below the next phase of this little project. Managed to make some quick photos and a video in the last 'daylight' of today. Hope you like it! added the eyes, back, arms and some details worked on consistent colors shortened the wheelbase with 3 studs improved the cable routing, however the cable to the battery box will be a little bit more hidden then on the picture below. My renewed version compared to the original. In car modus: And showing the motorized functions: To finish the project I will try to add the stickers for the tape-reeled eyes, for further steps I have to experiment: cover the PF components without making it bulky; find a way to connect the arms to the transformation Thanks for following this project! Gerrit

Really impressive and nice photographed.

Wow, this is really cool ! Thanks for sharing and taking the time to make the video, it was not to long! I think this is something for the frontpage!

Thanks, had to search what the meaning was of "tape-reel", but now I understand why TLG used those strange looking eyes . They are definitely going to be part of this MOC!

Update time! I've fitted all the PF-components (3 M-moters, 2 IR-revievers, batterybox) on the chassis and used 12-tooth gears to extend the wheelbase. So I've a first rough working version! Happy that all those component fit in such a small model. On the photo below two motors are visible (one for steering, have some problems with my non-original servo) and one for the transformation (behind the back of the Robot). And after the transformation: From below Things on my TODO-list: create a shorter wheel base to get closer to the original 8852. I think the rear wheels can be moved 2 studs forward (by replacing the U-joint by a pair of 8-gears). Also the front wheel can be moved at least one stud forward. next item is to improve the aesthetics (finishing the head and back of the robot, update the colors and finishing the chassis) If you see things that could be improved, feel free.

Cool to see another 8852. Now we have a PU and a PF version… good luck! I’m still puzzling to get all the power functions into my small 8852.

Cool, a very elegant solution!

Thanks for sharing, really appreciate this because I don't own these tires (yet) and this could be the combination @Jundis was searching for ! Thanks!

At your service , lowered the mudguards one stud and here you are. Looks very good, thanks for the 'Jeep tyres' tip (and the 8047 as bonus)

That was also my first thought, but the B-model doesn't use the U-joint (the B-model is a simple tow-truck., 17 building steps ) I think you're right, I didn't find any other part that could be used, and indeed the 6528 axle connecters first appearance is 1993 (and the Axle Connector 3L 2016 ). Thanks, I really tried to follow the current TLG standard (as far as I have knowledge about that)! About the rubbing, there is enough room between the wheels and the bucket, below is the only possibility to make them touch Thanks! Having the objective to stay as close as possible to the original size, I had a very limited selection, so it was a compromise. Just tried the Jeep tyres and I think they work, but I'm not sure about the mini Unimog tyres. Am I right that these are even smaller? Thanks, that's what I like to achieve.

This is the studless version of the Technic 8853 loader released in 1988. My goal was to replicate the original set as close as possible using contemporary studless LEGO Technic (as with the TC20 contest). As far as I know this is the first studless version of the 8853. This MOC features all the functions of the original set: rear rack and pinion steering (trans red), a raising bucked (trans blue), and dumping (trans yellow). Cabin with driver’s seat. Specifications compared to the original: 372 parts compared to 332 parts for the original 15 studs wide compared to 14 studs 18.5 studs high compared to 20 studs 38 studs long compared to 35 studs Design process The design process was very simple: just stay as close as possible to the original using parts which are not overly rare and expensive. For the wheel I choose the Medium Truck Tires with yellow rims because the size is close to the original 62mm foam tires. As bucket I used the Technic Digger Bucket 10 x 18 (as used in six official technic loaders). Another thing to mention is that the original set only uses three(!) colors: yellow, black and light gray. For this set I used parts of 8 different colors, however on the outside I tried to stay as close as possible to the original three colors. I changed the color of the cabin and rear mudguards to black because I think it looks better together with the black bucket. One funny detail: I also used the universal joint in the original just as axle connector, not sure why TLG used it in the original.... Lastly, I used Blakbird's Technicopedia and the original instructions for reference and switched between the real build and virtual building with Studio during the design process. I get more inspiration from a real model, but studio makes it easier to make changes. Luckily my brother in law owns the original version that I could kindly use for the photo. Instructions The instructions are available for free on RB: https://rebrickable.com/mocs/MOC-94886/GerritvdG/8853-loader-studless-version/#details Video and more photo's

@2GodBDGlory cool, a real technic masterpiece. Nice video, hopefully everything will come together when the new battery is delivered!

You're right, see the pinned comments on his LEGO 10271: Fiat 500: In-depth Review & Speed Build Now back to the subject

because of some kind of skin problem

Thanks for the excellent review @Milan, really cool to publish it so fast! I really like the comparison to the real BMW and the effort you put in is really visible!! A joy to read and nice images! Although I'm more a construction vehicle guy, I like this set!

Wow, I love it! Really want to build this!

Hello everyone, I started working on this contest and selected the 8852 Robot because I don't have other ideas and I really seems to like recreating those legacy models (recently finished the 8853 Loader studless ). Below is a video of the first version: I used the long gear racks of the 42105 Catamaran for the extension of the front wheels and plan to use three power functions motors: a medium for the transformation a medium for propulsion and a servo medium for steering. Furthermore, I'm going to use the smaller battery box and two receiver units, will be a challenge to fit everything on such a small model. Other challenges is to get the ratio of the two transformaties right without making an exact copy of the original studfull model. Next is to work on positioning the motors and try the 11-tooth gear for the front wheels extension. More information about the original model (I don't own the original)": - http://www.technicopedia.com/8852.html - Original instructions http://peeron.com/scans/8852-1 (does anybody have a PDF-version?) Cheers, Gerrit!

Wow, very original, didn't know these spring legs exists...

Thanks for sharing, love all the details. Did you omit the life rafts intentionally? The text formatting could be better, and also some more explanation/background would be appreciated. But I don't see any real marketing of business or social media... so I don't mind and don't want to miss these offshore builds. Nice picture of the ship IRL fallen dry with a guy in orange for scale: https://ankerplaat3.files.wordpress.com/2020/12/thun-blyth.jpg