Rum

Hey Lego-Fans, im searching for a cool wall layout for a fire station in modular building. My favorite brick for this is the 1x2 profile brick (http://brickset.com/parts/6000311). But how can i build the corners? These bricks dont have a profile on the 1x1 side, so its looking ugly... Thank you for help! Rum

Thank you!

I used 88002 PF-Motors And there is enough space for buffers on both ends.

My PF-Lights have long cables for each lamp. So it should be no problem. The second motor will be in the same direction and can have buffers, i tried it already with 7939. Thanks for answer and that you like it. :)

Hey AFOLs. I'm building a RC Shunter Train. I dont have an example in real, so I build the locomotive like i melikes it. German-Version Ich habe bereits einen Post im 1000-Steine Forum verfasst. Dort steht genau dasselbe. :) Features Light (just 1 PF-Light. because there is just one lamp ahead and behind) 2 PF-Train motors (I let some space for the cable of the second motor. -> longer baseplate 6x32) rotatable cockpit Batterybox, IR-Receivere and cables have enough space (must be covered by stickers) Some Pictures http://www.1000stein...-1437327295.jpg http://www.1000stein...-1437327342.jpg http://www.1000stein...-1437327360.jpg http://www.1000stein...-1437327386.jpg http://www.1000stein...-1437327407.jpg Downloads LDD-File: http://brlshort.de/LokLDD Partlist: http://brlshort.de/LokTeile I hope you like my model and give me some resonance. :) My next steps will follow, eg. the sticker for the BatBox and the IR-Receiver. Rum

Hey, trank you for help! I already had a look at the sets, but I have the Heavy Haul Train and the other one isnt a dual-cab version... So are there any custom locomotives? Rum

Hello, I want to have a Dual-Cab Shunter train. This one should be something like the three picture show. It can be a locomotive with just one carriage, like the third picture shows. But it has to be very detailed, a dual-cab, and RED (because I'm german and it should look similar to real one of the DB (Deutsche Bahn). Yes, not all the pictures show dual-cabs, but they are just some examples, because I can't write my conception. The second one is my favorite. I would be very happy, if you could give me some examples with instructions. Thank you for help! Rum PS: Examples with another maincolor instead of red are ok too, we all can change the colors :) https://de.wikipedia.org/wiki/Datei:DB_Schenker_265_022-4.jpg https://de.wikipedia.org/wiki/Datei:Lobenstein_290_064.jpg https://de.wikipedia.org/wiki/Datei:BR362.JPG

Thank you for help. I'm sure that the hazard warning is not turned on and off. I saw this in some reviews. I hope the next Beta-Version of the Profile Designer allows this feature... :) EDIT: I got an answer: https://social.sbrick.com/forums/topic/152/car-blinker

I want to add some blinkers to my technic RC car to make it more realistic. I'm using SBricks to control my car, but dont know how to add the blinkers. The profile of the Volvo has blinkers and warning lights already, but how does ist work? I cant find the right function to add this. I want to create my own profile. Thank you for help! Rum

I did, but the sbrick forum is not very active...

Hey guys, I want to add some blinkers to my technic RC car to make it more realistic. I'm using SBricks to control my car, but dont know how to add the blinkers. The profile of the Volvo has blinkers and warning lights already, but how does ist work? I cant find the right function to add this. Thank you for help! Rum

Hey guys, I want to build a small Lego Technic car, but don't know how to build very professional. So I had the idea to search for some instructions in this forum. Do you know any RC-Cars with building instructions, which have 4WD, a nice suspension, high speed and are not longer than 30cm (max. 1 ft)? I would be so happy, if you can help me. The car can also be much smaller, but I think the functions need a lot of space to work perfectly (eg. the suspenson). I found already the Trophy Truck "Double Trouble" by RM8, but there is no building instruction and 4WD... my favorite specs: 4WD nice speed, but also torque -> Baja by RM8 suspension for any terrain not longer than 1 ft / 30 cm Thank you! Rum

Hey, could you please reupload the video without content restricted music? Users from Germany can not watch your video, because it is blocked... Rum

Hmmm. The unlimited turntable makes pneumatics impossible... I do not know anything about the actuators, because I love pneumatics more, so I build everything with pneumatic. Rum

Why you do not use the new large pneumatic actuators? You have to wait 3 months, but they are awesome! :D

Can you show the compresor? Because at the moment I design one, but you could give me some ideas for good functionality. Rum

Oh, thats a better way! Thank you, I will think about it.

Hmm, thats right... But with only one tank I can not use many functions at the same time with high pressure, so the compressor has to run always...

ok :D I just want to use the pneumatic power on a trailer. Maybe to have a dumper or something else. But there should be also other functions, which use many air, so I need many. (but I do not know the functions exactly, beacuse I am still planning) The many valves are important, to switch between one or two tanks (less or many air :) ) and to block the way out of the system, or into tank two (if only tank 1 should be used). I hope you understand this

Hey Lego-Fans, I started to design a Pneumatic-System, which I want to build on madoca's 4x4 Pickup. Please donwload the file and tell me if I can build it, or something is wrong. Short explanation: The pump (compressor) pumps the air into the first valve. There you can decide if only one or both tanks should be used. If you put valve one in the upper position, you use only one tank (tank 1), you have to switch the second valve in the center position (because tank 2 should not get filled with air) and switch valve 3 in the upper position, to allow the air to go through valve 3. Now, only the first tank is used and I continue with the exit of tank 1. The air comes out of the tank 1 and goes to the t-junction. On the left side we have the compressor-switch, which turns on and of the compressor. On the right side we have the manometer, where I can see the pressure of my system. After the manometer there is the exit of the system, where I can use the compressed air. Now the other situation, when valve 1 is in the lower position. The air comes first to tank 2 and fills him. To use the air, you have to switch valve 2 in the upper pistion and valve 3 in the center position, to block the way out of the system through valve 1. After valve 2 the air goes into tank 1 and controlls the manometer and the compressor-switch. compressor-switch build like this: http://www.malgil.co...ages/image2.jpg (but with PowerFunctions-Switch) I hope you understand my explanation and drawing! Can I build it like this, or is there a better and easier way? Please comment! Rum