Search the Community
Showing results for tags '3D'.
Found 36 results
-
Hello everyone 1- I hope this subject is in the right place. 2- Sorry for my bad english I think you all have at one time or another during a construction, wanted to have a room that does not exist to carry out your project. So, you've probably imagined several over the years. 1- I imagined myself to create several in recent days (others to come) You can find them on Flickr HERE you can react on what you see. 2- Would you like to propose some already, in 3D or other? I opened a group for: - the techniques, - tutorials - new coins 1 month ago on Flickr HERE 3- Do you have any ideas? => Could you describe by embellishing an image that you would like to have? I can try to create on request if my limitation 2D (photoshop) allows it. By the way for your information, I also realized baseplates that are on Flickr. I would like your opinions, your reactions, your proposals ... TYVM Some exemples:
-
3D LEGO Design & Animation
The_Director posted a topic in LEGO Digital Designer and other digital tools
Hello all! Be warned, large images will be in this thread. Please be amazed and hopefully the moderators will be too :D ------------------- First time posting here, so howdy. lol I have already been infecting your discord channel before I even became an official member :P A little about me before I start what this topic is about: I work on building the instructions for installing curtain wall & storefronts as an real life job. So I work in the 2D & 3D architectural industry for a living. And I use Blender as an addictive hobby on the side. Go figure. My goal is to start making 5+ minute animations in only a 3D environment, as while I do have legos, I don't have the space for a full on film studio. I hope to enjoy a long stay with everyone here! I love to share my trade secrets to 3D modeling if your ever interested! ----------------------- On to my topic now: Please see below my work so far making 3D Lego animations. (I apologize for not obeying the 800px square) Thanks all, I will be updating this regularly! T_D -
Help with Digital Renders
Bricked1980 posted a topic in LEGO Digital Designer and other digital tools
Hi everyone I'm a regular on Eurobricks but this is the first time I've posted anything in the digital building forums. I've recently started to design MOC's using Lego Digital Designer and this is my first creation... All the images were rendered using Blue render which I like because it's fairly fast and incredibly easy to use. I was quite happy with these images but then I saw a few other renders that people have created online and am blown away by the quality of them. Some of them are so good that it's hard to tell they aren't built from real bricks. Can anyone suggest to me, the best software or method of rendering images from models created in LDD. I've tried POV Ray but am not that impressed with the results. Even in top quality the renders seem to have a fake looking sheen that makes them look artificial and almost as if they've been shrink wrapped in plastic. It also takes hours to render the images on my PC using POV Ray. I've been pouring over other threads in the forum and have read a lot about people using Blender. As far as I can tell though the only way of getting LDD models to open in Blender is by converting them to LDraw files first. When I tried this though it messes up a lot of the bricks in my model. Similarly I tried importing them in to Mecabricks but this messes up any bricks that have printed elements on them. Does anyone know of another way of getting LDD files in to Blender directly without it messing up the models? From what I've seen, Bluerender seems to be the most user friendly option for creating renders. I read somewhere on here that a "Sunflow" patch had been created for Bluerender which gave a more realistic result with better detail and the Lego logo on each stud. When I followed the link to download this though it redirected me to a different site, so I assume this patch has since been removed. So I'd be very grateful if anyone could suggest anything I can do to make my renders look more realistic or suggest any other software or methods that might give a better result. Thanks! -
Good Day! Since first seeing Technic figures in a catalog back in 2005, I really wondered whether there was a female version as well. Unfortunately , as we know , there are none. This problem is solve-able either modifying an original lego part (which will decrease the number of those in existance) or making your own. As a purist almost , I would choose the second version. I was surprised that no one has done this before (there is a broken link to a japanese website where someone done that in 2000's, but no pictures to be found anywhere), I took my free time to make a quick mock-up. First step was to get the torso and head into my 3D program - Autodesk 123D - from LDraw. That was done using LDView (place part in x=0, y=0, z=0 and export the file containing it through LDView as an .stl). Next was the chest, which was done using a few spheres, lofted surfaces and tubes (I tried not to exagerrate the size too much, just for it to be slightly notice-able). Luckily there were mannequin's side & top-down shots for inspiration. Next I exported this hair piece and scaled it up to approximate size & placement. Please note that I'm a noob at 3D modelling, and my "art side" is non-existent (for me it would be easier to draw a mechanical piece as a blueprint rather than a human being), so I would love to hear any suggestions and ideas. I do eventually plan to upload the finished model to Shapeways, but I can send it via e-mail. Question: Do you think the "reduced"? waist (as the one printed on minifigs) is necessary? Images:
-
Hi to all! I'm Sergi, from Barcelona and I'm a 3D student. I was make a fake advertisement about Lego Minecraft The Village. Enjoy it ? Lego Minecraft The Village
-
This summer I acquired a 3D printer, and it only just recently crossed my mind that I could make parts that I've been wanting - even those that don't exist yet. This will be the thread I throw all that into. For the first post, here's my first version of the standard straight track: First, I started off by drawing the track profile, using the dimensions I found on the L-gauge wiki: http://l-gauge.org/wiki/index.php?title=Track_Geometry I used Autodesk Fusion 360 for the modelling portion (it's free to students, makers, hobbyists, and businesses making less than 100k USD a year!). Then, I extrude the profile out by 128mm to get the 'blank' for a piece of straight track: I then make another drawing on the top of the base which represents the ties present on the Lego track: Finally, I take every other section of the blank and extrude them downwards to the bottom of the blank, this time using a 'cut' operation instead of a 'new body' operation: I now have something that looks quite a bit like a piece of Lego track! It's obviously missing studs, the snap-together connectors, and the cutouts on the ends of the rails. However, it will do for a first print test. I then export from Fusion 360 as a .STL and load that into my slicing program of choice, Cura. I'm looking at the model in the layer view after applying my 'strong' settings - this lets me see the model layer-by-layer and I can see how it should look. I can also see a cross-section by using the slider in the upper right: Here we're seeing the interior of the rails, but not the ties. Here we can see inside the ties, as well as the supports - these are temporary structures that will be removed once the print is completed. They hold up the overhangs in the model that may otherwise sag or distort excessively - I'll need to change the support orientation before I commit to a print for better results. Unfortunately, it's too late at night for me to kick off a print - I know the time estimate given is somewhat of an underestimate, so one of these very basic track pieces will actually take a bit over three hours instead of the two and a half that's given by my slicer. I'll be doing that tomorrow.
-
From (another) rib of Blueprint, another program was born! I hereby offer you: BrickyFab upload your LDD models to Sketchfab. How it works: Just open the program, load an LDD model , enter your Sketchfab API, add some descriptions and tags and click Upload. Features: Single click interface, remembers your key and tags. Share your models around with Sketchfab fine embedded visualizer (works in Facebook too!) etc Requirements: Java8 (revision 8u40 or better) A Sketchfab account Lego Digital Designer Disclaimer: Use at your own risk, i decline any responsability for anything that may happen to you using the program. Donation: Should you like the program and you feel like, you can donate any amount of money here: https://www.paypal.me/msx80 thanks in advance! Download: Download the latest version here! Screenshot: See some 3d models here! Changelog: 0001: first release! -
Yes, a classroom is the place for learning! Even though learning could be anywhere. I created an LEGO interior scene of classroom, this model is at minifig-scale. This model was mainly inspired by LegoJalex’s Classroom. Since that is a big built, I tried to make it small and more simple. Classroom by Kamal Muftie Yafi, on Flickr I used a unique technique to make the four-legged chair. I forgot where I got that chair design. If you know, please put a link in the comment, I just want to credit the builder.
-
Creating Tiny Turbo MOC is a great way to design a LEGO Car, it's small and you can add so many details on it. I've done some Tiny Turbos MOCs, so here it is... Let's start with my very first Tiny Turbo creation, Orcar: Orca Car: Orcar by Kamal Muftie Yafi, on Flickr The second one, a Hatchback Racer: Hatchback Racer by Kamal Muftie Yafi, on Flickr Then get low with this Slance, Slammed or Stanced Car: Slance by Kamal Muftie Yafi, on Flickr Got into a concept theme, a Concept Buggy and it's ready for Off-Roading! Concept Buggy by Kamal Muftie Yafi, on Flickr And lastly, a Concept Semi Truck: Concept Semi Truck by Kamal Muftie Yafi, on Flickr Okay, that's just some of my Tiny Turbos creations, hope you enjoy it! You can see some information about these models in my Blog!
-
Ramadhan is an Islamic month, it’s a special month where every muslims are fasting. It already started about 2 weeks ago so maybe it’s a little late to celebrate it but it’s not a problem right? As a celebration, I created an interior scene. So this is what I came up: Peaceful Ramadhan... by Kamal Muftie Yafi, on Flickr It was rendered using Blender via Mecabricks..
-
Bring 3D LEGO creations to Eurobricks
jlenglet posted a topic in LEGO Digital Designer and other digital tools
Hi everyone, My name is Jeanne and I work at Sketchfab, the leading platform to see and publish 3D content. We have a community of 900k artists who posted a bunch of awesome LEGO 3D models. I would be curious to hear your thoughts about showcasing LEGO models in 3D. Do a lot of you use LEGO 3D design softwares (like Ldraw or LDD?) to build your MOC? It is really easy to embed our 3D viewer everywhere online - like a Youtube video - and I'd love to make that happen in eurobricks as well! (If an admin reads this message, he/she can contact me directly to make it happen) -
[MOC] Post-Apocalyptic Car from 31014: Power Digger
KamalMYafi posted a topic in Special LEGO Themes
An alternate from 31014: Power Digger set, a Post-Apocalyptic Car. It's an old MOC actually, but I've made a new render of it... Post-Apoc - 31014 Alt (with Instruction) by Kamal Muftie Yafi, on Flickr I’ve created an Instruction for this model, if you’re interested to create this model click here for the instruction (it’s free!). -
LEGO NEO Fighter, inspired by TIE Fighter from Star Wars movie. Called NEO because this model using NEXO Knights part, and I cut the NEXO to NEO. NEO Fighter by Kamal Muftie Yafi, on Flickr Some more Information in my Blog!..
-
I'm back with a new (digital) MOC, LEGO Mini Modular: Book Museum. Book Museum - Main by Kamal Muftie Yafi, on Flickr More Images and Information in my Blog!
-
I don't know if this is the right thread for this (yes, I'm one of those guys that doesn't look beyond the Technic forum), but I really think it would add value to Eurobricks if we could embed 3D views on our digital design files stored in for instance Bricksafe. Just like this. What do others think?
-
Greetings,LPub3D 2.0.14 is released. LPub3D is an Open Source WYSIWYG editing application for creating LEGO style digital building instructions. It uses the LDraw parts library, the most comprehensive library of digital Open Source LEGO parts available and reads the LDraw LDR and MPD model file formats. LPub3D is available for free under the GNU Public License v3 and works on the Windows Operating Systems. Portions of LPub3D are based on LPUB© 2007-2009 Kevin Clague, LeoCAD© 2015 Leonardo Zide.and additional third party components. LPub3D can run under POSIX-compliant operating systems, such as Linux, Mac OSX, & BSD using WINE HQ. You can download from sourceforge.net or check for updates in your existing installation. LPub3D 2.0.14.838.2 Features and enhancements ------------ Fix: File reload after external source change breaks page drop-down combo dialogue(r837) * When a file is reloaded after being changed by an external source, the drop-down menu for selecting a page doesn't work until after navigating using another method. Fix: Image orientation does not conform when page orientation changed to Landscape (r836) * Image generation was not inheriting the proper page size values. Fix: Extra characters "%3" in margin meta and page size meta does not display the page size identifier(r835) * Oops, allocated the page size identifier variable to the wrong meta - should have been allocated to page size meta instead of units meta (units meta is used for setting the margin). Consequently, the page size meta is missing the size identifier (A4, Letter, etc...) because the place-holder to pass the variable is not there. This must have happened during the patch process from the maintenance branch because it did not present during my tests. Both issues are now corrected. Cheers,
-
Greetings, LPub3D 2.0.13 is released. You can download from sourceforge.net or check for updates in your existing installation. Interesting fixes are the ability to switch part occurrence (times used) in the PLI between per step and per submodel on called out and submodel pages; the ability to insert one-to-many non-faded models (e.g. with alternate attachments/views etc...) when fade step is on; and new meta for pages size including the standard identifier - e.g. A4, Letter, Legal etc... and print/export performance improvements. LPub3D 2.0.13.834.2 Features and enhancements ------------ Fix: Logging options added to Preferences (r832) * Select logged attributes and logging levels. Fix: Prompt search directory settings reset (r831) * Prompt to inform that the search directories have been reset after the search directory reset button is clicked. Restarting LPub3D is not required. Also changed menu items "Reset 3D Viewer Model Cache" to "Change Temp File Cache" and "Reset Image and Model Caches" to "Reset All Caches". Fix: Inconsistency between part counts in submodels and part counts in call-outs where multiple instances are involved (r829) * For submodels, the PLI part counts reflect only one instance of the submodel, even if multiple instances are used in the same step. The instance count is correct, and the BOM has the correct total number of parts. With this update, sub-model pages displaying instance count now have a context menu option to display parts per step/page or not (total parts consumed by the number of instances indicated. Previously, for callouts, you have the options (see context menu) to display parts list per callout (one instance) or not. When you select no parts list per callout, the PLI will show all the parts consumed by the total number of instances in the callout. If you choose parts list per callout, the PLI is moved to the callout and only the parts for a single occurrence of the callout is shown. The idea here is if you have 5 occurrences of the called out assembly, you'll need 5x the parts total, but only 1x parts are shown to indicate what you need to build an instance of the called out assembly. On sub-model pages displaying the instance count, there is only one behaviour for PLI counts (the most intuitive) which is to display the parts list per step. This is intuitive because the primary role of the PLI is to show what you'll need to build an occurrence of the step shown - it is not the intention to mimic the BoM. Nevertheless, I added a context menu item to not display parts list per step and instead display total parts consumed by the number of occurrences of the submodel in the parent submodel/step. Fix: Page size and orientation processing update (r826/833) * Further industrialization of the print/export module. This update streamlines the process and realizes some performance gains. There are some key changes. Notably, page orientation and page size are now mutually exclusive. This means when switching from Portrait to Landscape, accompanying the orientation meta with a transposed page size meta no longer required or managed. Here is an illustration: Previous behaviour when editing a page size change required the following meta commands: 0 STEP 0 LPUB PAGE ORIENTATION LOCAL LANDSCAPE 0 LPUB PAGE SIZE LOCAL 11.0000 8.5000 Note that the page width and height have been transposed. Going forward, transposition of the page width and height when switching from Portrait to Landscape is automatically managed by LPub3D. NOTE: This update is NOT backward compatable. An accompanying transposed page size meta to indicate the switch from portrait to landscape as shown above will be treated as a new page size meta for that page. Consequently, using this meta to 'switch' orientation will actually result in NOT switching the orientation as LPub3D will automatically switch again the switched page size meta. If the user is only interested in changing the orientation, the proper meta command going forward will be: 0 STEP 0 LPUB PAGE ORIENTATION LOCAL LANDSCAPE To help with accurately displaying the page size identifier in the setup and context menus, the standard page identifier is now appended to the page size meta command. For example: 0 LPUB PAGE SIZE 8.5000 14.0000 Legal 0 LPUB PAGE SIZE LOCAL 8.5000 11.0000 Letter 0 LPUB PAGE SIZE LOCAL 5.8000 8.3000 A5 0 LPUB PAGE SIZE LOCAL 5.8678 8.3456 Custom Along with the width and height values, if the page size is non-standard, the identifier "Custom" will be automatically used. Additionally if an identifier is not present, the identifier "Custom" will automatically used. The page identifier is displayed in the Page Setup dialogue and Size/Orientation change context menu dialogue. Also, the LPub3D print/export function no longer needs to parse the model file to capture, in advance, page sizes. This capture is performed during the existing page parse and load functions and is exposed to the print routines during printing/exporting. This change was necessary to better enable mixed-size page export/printing where it is necessary to 'look ahead' to get the next page's size and orientation parameters in order to configure the printer engine before processing the page. Fix: Expand INSERT MODEL meta command behaviour (r825) * When using part fading LPUb3D will now process multiple INSERT MODEL commands rendering the CSI content at each command. For example, if the instruction document includes different model attachments, the editor can now include a non-faded image of the entire model with each attachment. Here is an example of he proper command sequence when used in conjunction with BUFEXCHG: 0 BUFEXCHG B STORE 0 //... default model content... 0 STEP 0 BUFEXCHG B RETRIEVE 0 BUFEXCHG A STORE 1 0 445 -46 -10 1 0 0 0 1 0 0 0 1 attachment1.ldr 0 STEP 0 LPUB INSERT MODEL 0 LPUB INSERT PAGE 0 STEP 0 BUFEXCHG A RETRIEVE 1 0 0 0 0 1 0 0 0 1 0 0 0 1 attachment2.ldr 0 //STEP These last 3 lines are optional when editing the model file. 0 //LPUB INSERT MODEL If they don't exist and fade step is ON, they will be automatically created by LPub3D 0 //LPUB INSERT PAGE Fix: The PNG output of a model with various page orientations is not correct (r824) * Cleared page buffer before rendering each page. Also corrected a typo causing page range to sometimes not work for image exports. Cheers,
-
Can you call this LEGO?
Ulrik Hansen posted a topic in LEGO Digital Designer and other digital tools
I could not find a discussion on this already so here goes: I am a professional freelance LEGO artist. My fondness for the LEGO System developed partly because of the challenge and restraint of the system. When ever something is called LEGO, that is what I relate it to. I sometimes see some pretty renderings of so-called digital LEGO builds on places like Flickr, and they are promoted as LEGO builds via LEGO groups. The problem is that these builds are often rendered with parts in colors that those parts have not been released in, and thus the build might as well have clone parts in it. That's when it does not belong in a group sharing things build with the LEGO System anymore. People doing this, could just as easily call it something else (Brick Art or something) and everything will be totally ok with me, but calling it LEGO is just misleading, frankly cheating. What do you guys think? Here is the latest example using a Slope 45 2 x 1 with 2/3 Cutout in Trans-Black for the windshield. I have nothing against the guy, but calling it LEGO just because LDD was used... Perhaps the problem only really lays with the groups accepting these contributions. -
Hi Guys! This topic is where I will be adding updates to the new parts that I make available via Shapeways. There is also a FB page where I'll be posting new designs. For a bit of personal history, I work in the architectural field and 3D modeling has been a passion for the last 12 years. When I finally had a family of my own, I rediscovered the boxes of LEGO I carefully stored from the 80's. Not long after, I decided to combine the two things I enjoy doing: Technic and 3D. Here are some of the parts that are already size approved and available: The GoPro Adapter is the only product that is available pre-printed on Bricklink in a very limited quantity. Since my intention is not to sell via this thread, you can find more details on the Facebook page in my signature.
-
Hello Eurobrickers! Today I would like to show you my real 3D Lego mosaic with Darth Vader and Stormtrooper. I`m not Star Wars fan, but I`ve built something like this. I had before 3D Lego mosaic (mosaic 1, mosaic 2) with a stand to rotate my mosaics, but the stand I demolished
-
hy A while ago i started making alternative wheels for lego uminog tyres. First i made them using sketchUp but i had a lot of problems so i restarted building it in a totaly unknown program for me, 123d design. It was hard to learn to use this program. Today i got the final version, finally after 4 months.at first they lookt really ugly (see below) but halfway through the cutting of the support matterial it was much better. IMG_20160524_120140122_HDR by thenextlegodesinger, on Flickr IMG_20160524_163606705 by thenextlegodesinger, on Flickr i am really happy with the final result. beside the not-that-accurate printing, my wheels look pretty awsome. IMG_20160524_164657686 by thenextlegodesinger, on Flickr IMG_20160524_164726639 by thenextlegodesinger, on Flickr i don't like the looks of it when they are out of the tyres but when they are on them, it's like it was meant to be IMG_20160524_164851636 by thenextlegodesinger, on Flickr uminog rim stl by thenextlegodesinger, on Flickr uminog rim stl2 by thenextlegodesinger, on Flickr i am probrally get some wheels printed by shapeways or i.materialize. thanks TNLD more pics on my flickr acount: https://www.flickr.c...6413@N05/albums
-
After many months of work, I am happy to present you Hint lab ! I would love to get your input on my work :) Why ? You know it better than anyone, many people have a strong emotional attachment to our little bricks. They remind us of our childhood, they represent creative thinking etc. Lego bricks can be found in almost every home around the world. They come in many shapes and colors that make them ideal for customization and assortment. I realized a lot of people like to match their accessories to their outfits. Matching shoes to shirt, bag to watch... I wish to associate these ideas together. So I present you : Hint Lab. Hint lab is a range of jewelry in precious metal and nylon that allow you to wear Lego bricks and match them to your outfit. More HD photos here. What do you think of it ? Do you think there is a market for this kind of products ? I want to improve the range, do not hesitate to tell me if you have any suggestion :)
-
Hello Eurobrickers! Today I would like to show you The Smurfs in real 3D Lego mosaic Two pictures in one... ...another pictures... ...my Smurfs world... ...my all 3D Lego mosaics... and my whole collection. And short
-
[MOC] Mickey Mouse And Friends In Real 3D Lego Mosaic
legosamigos posted a topic in Special LEGO Themes
Hello Eurobrickers! Today I would like to show you my real 3D mosaic with the characters from the world of Walt Disney building process My all mosaics and short YT video I used a lot of single and double slops and 4 baseplates 32x32 -
hello guys this my model lego helicopter in 3D with Softimage : Please escuse me for my English, I am French:) I am a fan of légo technic and I wanted to work on the 3D assembly(editing) of my model of helicopter. I made the 3D at the same time as I went up my Helicopter really lego and here is the result :) Do not hesitate has to tell me that you think of it :)
.thumb.png.116032e930e483fb4ebbfdc62183bd34.png)
