Bonaparte

Decal Wish List

Recommended Posts

Thanks for the thanks and praise. First time making a decal for someone else.

Can you link me a picture of the exact Voldemort figure in which you want the face off of.

The Prof Quirrel part is right though just needs to be on the other side right?

Also was this more of what you were looking for? I will incorporate the other Minifig face you linked last post after I have a better idea of which Voldemort face your wanting.

Quirrel + Voldemort

Edited by TLOR FETT

Share this post


Link to post
Share on other sites

Thanks for the thanks and praise. First time making a decal for someone else.

Can you link me a picture of the exact Voldemort figure in which you want the face off of.

The Prof Quirrel part is right though just needs to be on the other side right?

Also was this more of what you were looking for? I will incorporate the other Minifig face you linked last post after I have a better idea of which Voldemort face your wanting.

Quirrel + Voldemort

I perhaps wasn't clear enough to begin with and to that I apologise, The Voldemort head is the old one that came with the Final Challenge set (2001) and that is the right side of that face I wanted it to be on, :classic:

just that other face now!

You have been so helpful, if I need anything else I will let you know :blush:

Share this post


Link to post
Share on other sites

try 3

AM I getting closer, the green half is the Quirrel/Voldemort from that set you had mentioned. The other half is the best I could find to match the pic you linked unless you can give me a figure set or part name or number for that head so that I may better find a picture of it.

Share this post


Link to post
Share on other sites

try 3

AM I getting closer, the green half is the Quirrel/Voldemort from that set you had mentioned. The other half is the best I could find to match the pic you linked unless you can give me a figure set or part name or number for that head so that I may better find a picture of it.

you're getting closer

the head is from one of the soldiers in the Medieval Market Village

plus I'm after a flesh version

The Voldemort part of the face needs to be on the other side with the MMV soldier head

could you also try making the pupil of the MMV soldier head smaller to match the Voldemort eye?

I hope this isn't too much, I feel bad for asking a lot :blush:

Share this post


Link to post
Share on other sites

Quirrel + Medival Market Villager

Check this one out. If you have AIM or MSN you can PM your handle

THAT IS PERFECT! :grin::thumbup:

Thank you so much!

and I'll PM you! :thumbup:

Share this post


Link to post
Share on other sites

hey I was wondering if someone could make me a flesh color john marston from red dead redemption decals wearing the us marshal outfit and legend of the west outfit and face decals would be great too thanks.

Share this post


Link to post
Share on other sites

hey I was wondering if someone could make me a flesh color john marston from red dead redemption decals wearing the us marshal outfit and legend of the west outfit and face decals would be great too thanks.

These two outfits? http://reddead.wikia.com/index.php?title=U.S._Marshal_Outfitℑ=IMGP4148-jpg

http://reddead.wikia.com/index.php?title=Legend_of_the_West_Outfitℑ=LOTWOutfit-jpg

If you want or need anything different let me know before I start to try and make these.

Also these are made by someone else but I found them

Marston

Marston 2

Marston Torso

Marston Belt

Marston Head

Share this post


Link to post
Share on other sites

Hi! I have a request I'm surprised I haven't seen anyone ask for yet. I'd like torso and hip decals like the new Two-Face's, but with the old black/white colorscheme please. So like the torso and hips here. I would also like the back printing and if you could make a decal for the back of the hips, that would be nice. So all of that, just with these colors. :classic: I hope that this isn't too much to ask. :classic:

Share this post


Link to post
Share on other sites

These two outfits? http://reddead.wikia.com/index.php?title=U.S._Marshal_Outfitℑ=IMGP4148-jpg

http://reddead.wikia.com/index.php?title=Legend_of_the_West_Outfitℑ=LOTWOutfit-jpg

If you want or need anything different let me know before I start to try and make these.

Also these are made by someone else but I found them

Marston

Marston 2

Marston Torso

Marston Belt

Marston Head

Yea they are the ones I was talking about.And thanks for finding those others I'll use them as well.Thanks again for all the help so far

Share this post


Link to post
Share on other sites

Yea they are the ones I was talking about.And thanks for finding those others I'll use them as well.Thanks again for all the help so far

Here is a ruff cut for the US Marshall, I need to add the vests lines and buttons and I think the gold/yellow pattern needs blended in more. Do you want him to have the rile strap across his chest? What do you think of the rough cut?

Share this post


Link to post
Share on other sites

I'd like a set of torso, leg, and head decals for the "Your Favorite Martian" band on YouTube. Here's a reference photo:

YFM.jpg

Thanks!

-Sci

Share this post


Link to post
Share on other sites

Am I the only one who can't see Praiter's wubly decals? I'm sorry to moan, but there are so good it's annoying that I can't get them. :sad:

I wonder if it is my PC, or the link being broken. Maybe someone could PM them to me. But thanks so much for making them for me Praiter. :wub:

Share this post


Link to post
Share on other sites

Am I the only one who can't see Praiter's wubly decals? I'm sorry to moan, but there are so good it's annoying that I can't get them. :sad:

I wonder if it is my PC, or the link being broken. Maybe someone could PM them to me. But thanks so much for making them for me Praiter. :wub:

I see them perfectly, so no broken links. Have you tried deleting your cookies and /or checking your browser's options?

Anyway, I'll PM them to you now. :wink:

Share this post


Link to post
Share on other sites

Here is a ruff cut for the US Marshall, I need to add the vests lines and buttons and I think the gold/yellow pattern needs blended in more. Do you want him to have the rile strap across his chest? What do you think of the rough cut?

I cant find the rough cut but yes i would like him to have the rile strap.Thanks again

Share this post


Link to post
Share on other sites

I cant find the rough cut but yes i would like him to have the rile strap.Thanks again

Srry I forgot to paste the link

USMarshall John Marston

Share this post


Link to post
Share on other sites

Srry I forgot to paste the link

USMarshall John Marston

I was hoping it to look more like this,http://www.flickr.com/photos/30722462@N04/5073582914/,but I like yours,Im not to crazy about the gold dots tho.

Share this post


Link to post
Share on other sites

Two-Face Recolor

Aiming for something like this ( I know it is sloppy atm)

Thank you. That would be great, I only need the front right now. If you could clean it up and change the black lines on the black side to gray so that they are a little more noticable, that should be perfect. :classic:

Share this post


Link to post
Share on other sites

I was hoping it to look more like this,http://www.flickr.com/photos/30722462@N04/5073582914/,but I like yours,Im not to crazy about the gold dots tho.

ok I dont mean to be a pain, went back and looked at your agian and wow its really close,just add the stuff you were talking about,make the bage gold and the dots kinda grey i guess and its going to be perfect thanks again sorry if I am beeing a pain.

Share this post


Link to post
Share on other sites

Am I the only one who can't see Praiter's wubly decals? I'm sorry to moan, but there are so good it's annoying that I can't get them. :sad:

I wonder if it is my PC, or the link being broken. Maybe someone could PM them to me. But thanks so much for making them for me Praiter. :wub:

It could be because I've saved the image in 4 colours rather than just rgb (or maybe the resolution is too high) sometimes that can cause images not to display correctly on screen but you should still be able to download them and get a more accurate colour match when printing.

If the images LuxorV pm's don't work for you, let me know and I'll try saving as a different format.

I see them perfectly, so no broken links. Have you tried deleting your cookies and /or checking your browser's options?

Anyway, I'll PM them to you now. :wink:

Thanks LuxorV

Share this post


Link to post
Share on other sites
.

In your last message you said I needed to make the beige into gold, I am not sure what your talking about.

Share this post


Link to post
Share on other sites

In your last message you said I needed to make the beige into gold, I am not sure what your talking about.

I meant the badge but it's support to be silver right?And I think the dots are more of a light grey or something.

Share this post


Link to post
Share on other sites

Thank you. That would be great, I only need the front right now. If you could clean it up and change the black lines on the black side to gray so that they are a little more noticable, that should be perfect. :classic:

I meant the badge but it's support to be silver right?And I think the dots are more of a light grey or something.

Untitled-1

http://www.flickr.com/photos/71438997@N05/6715144759/in/photostream

Both of you guys give comment and input

Share this post


Link to post
Share on other sites

Untitled-1

USMarshall2

Both of you guys give comment and input

yea man thats sweet thanks,i cant wait to see it all done thanks again for everything so far.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.