Decal Wish List

[has a differing opinion]

Please link to the single images of what you want. If you link to the index page of a wiki, people will get lost before they understand what it is that you want.

Thank you.

Ok. Here's a picture of a new series cyberman.

[piemaster1446]

could you please make me some Percy Jackson decals? i would like these in flesh please:

1. Camp Half Blood t-shirt- http://images.wikia.com/olympians/images/8/83/Zzz.gif

2.Chiron http://images.wikia.com/olympians/images/2/22/Chiron.jpg

3. Zeus http://images.wikia.com/olympians/images/4/4c/Zeus.jpg

4. Kronos /Luke http://images.wikia.com/olympians/images/2/2d/Luke.jpg

5. Poseidon http://images.wikia.com/olympians/images/7/79/Poseidon.jpg

6. Hades http://teamyeheyblog.yehey.com/wp-content/uploads/2010/01/steve-coogan-as-hades-i-n-PERCYJACKSON.jpg

7. Nico http://images.wikia.com/olympians/images/9/9c/250px-Nico_di_Angelo.jpg

8. Grover http://coolestwebsiteverawesome.weebly.com/uploads/3/9/6/9/3969140/4583527_orig.jpg

9. Medusa http://liveforfilms.files.wordpress.com/2010/01/percy_jackson_and_the_olympians_the_lightning_thief_ver7.jpg

Edited August 2, 2011 by piemaster1446

[Raider]

i would love a jango fett decal

[slovakiasteph]

-Wilkie

EDIT: Here is another decal request. Slovakian number plates from the previous page just encase they were not complete. Feel free to use them but give me credit. You can also change the numbers or flag if you wish.

Thank you very much! These are lovely! Can't wait to use them!

[harrypotter188]

Hi everybody!!

I have read that harry potter fans must no put long list

so here I have a little list that you can make us

(only face)

Hermione

Ron

Luna

Stan (from the knightbus)

Fleur

Bill

Thank you a lot in advisement

Hope you can make them

[Kinz]

Can someone please make me a Leatherface style decal, but a slightly more bluish tone.

Make sure the eyeholes and mouth hole is big enough so I can cut out those areas with a small knife so I can put it over the face of the minifigure.

Thanks! :)

Edited August 5, 2011 by Kinz

[Brandon Jannard]

someone should make some batman decals

[LuxorV]

I am sad to say this, but I noticed an increasing decline in the quality of posts in this thread.

Terms like 'Hello', 'Please' and 'Thank you' are used rarely. Capitalisation is not much loved as well

Finally, I adviced many times that people should link to reference material (pictures) in their requests, to help our decals' designers in their task.

I would not want to do this, but if posting quality does not improve in the future, we'll have to ingnore those requests not living up to basic forum posting standards.

Thanks for your understanding and co-operation.

[Kinz]

Well I recall saying 'Please' and 'Thank You.' But if you can't complete my request 'right-away' I completely understand. Take your time, I just need it for a brickfilm, but it can wait maybe a day since i'm not filming the scene yet.

Thanks :)

[Scorpiox]

Hi my decal-y friends!

I was wondering if someone could make me some orc decals for my orc forces. Thanks to Daimar I have a fully fledged berserker and am working on an orc shaman. To complete this shaman I need a torso and face that looks more shaman-y.

For the shaman's face please may I have a decal of the standard orc face but with a rag covering the eyes and maybe some markings or paint on the face or something.

For the torso please may I have an open cloak/coat that reveals a scarred and marked (with some tattoos or paint maybe) but still muscular (but not too muscular) orc chest. Please could the cloak/coat itself be torn and battered with trinkets and charms around the neck (and please ensure it looks orc-y enough).

These are just my base ideas and please design them differently if you want too.

Thanks for any help!

Edited August 10, 2011 by Scorpiox

[K-Nut]

Hello! Would someone please make me a scan of The Knights cape emblem?

http://www.eurobricks.com/forum/index.php?showtopic=50559

Thank you in advance.

Edited August 13, 2011 by K-nut

[RedMark18]

Hello! I would like a face and torso decal of Hank from Madness Combat. Here is a reference pic: Thanks for all your hard work,guys!

[LuxorV]

After way too long, I finally up-dated the Indexes, adding a new ATLANTIS Decals Index in the process.

Please, always refer to the Indexes before posting requests for new decals. Thank you.

[SoupOrFishOil]

Hello! I've been looking for a Batgirl (Barbara Gordon) face here's a Reference Image. And if possible, a second side of the face to give her white eyes, similar to the original Catwoman minifigure, but with a white visor rather than silver. Reference Picture

I don't need a torso, I am capable of making may own and already have it finished, but I am horrible with faces. Please Thank-you (in advance)!

Edited August 23, 2011 by Superficial Username

[KisKatona]

Hi! I was just wondering if someone could create a desert kevlar vest decal with a radio and pouches to fit a minifig vest, and some leg decals with kneepads, boots, and pockets. Thanks very much! No rush at all, take your time.

[legobodgers]

Hi, I am making a lego modular town and I would like to have some Primeval characters in it going to an anomaly.

Specifically Abby, Conner, Helen Cutter (This outfit) and Captain Becker/ security team faces and torso's but I would also love any other primeval characters.

I like LuxorV's custom Primeval figures but I would prefer more accurate decals.

Here is a site with reference pictures.

Thank you in advance.

Edited August 27, 2011 by legobodgers

[Master Sam]

Hey!

I am currently working on some Red Dead Redemption-Mocs but I don't have the needed minifigs. I would really appreciate it, if someone could make a decal for John Marston, one for the torso and one for the face.

Reference pics:

face: http://images4.wikia.nocookie.net/__cb20100802221735/reddeadredemption/images/thumb/8/82/Rdr_john_marston01.jpg/751px-Rdr_john_marston01.jpg

another one to see the scars better: http://images1.wikia.nocookie.net/__cb20100702043759/reddeadredemption/images/1/1d/Poor_poor_bandito.jpg

and finally one for the torso: http://i371.photobucket.com/albums/oo152/RosethornRavencroft/Characters%20I%20Adore/JohnMarston.jpg

Oh, and, if possible, it would be nice if the two other belts under the ammo belt wouldn't be there, the ones for the weapon and for the bag, thanks!

Greets

-Sam

[NickAb]

Hey!

I am currently working on some Red Dead Redemption-Mocs but I don't have the needed minifigs. I would really appreciate it, if someone could make a decal for John Marston, one for the torso and one for the face.

...

Hello.

I've made John Marston body decal, thought I'm not happy with a result still they may be useful for you.

PSD is available here http://dl.dropbox.com/u/13013314/Bricks/Red%20Dead%20Redemption/JohnMarston.psd but it is not organized.

[Master Sam]

Hello.

I've made John Marston body decal, thought I'm not happy with a result still they may be useful for you.

http://www.brickshelf.com/gallery/DarkoAb/Decals/johnmarston-body-yellow.png[/img

http://www.brickshelf.com/gallery/DarkoAb/Decals/johnmarston-body-flesh.png[/img

PSD is available here http://dl.dropbox.com/u/13013314/Bricks/Red%20Dead%20Redemption/JohnMarston.psd but it is not organized.

Awesome, I really like them, though I'd like to know what you want to improve ;) I'm surely going to use them!

I don't want to sound rude, but will you make the face-decal, too?

Greets

-Sam

[NickAb]

Thanks for good words.

I think buckle needs some details and ammo belt can be improved. Also you can tweak colors if needed. I have included psd link so all you need is trial photoshop.

I can make a face decal when I get more time.

Forgot to mention that these decals are designed at 600dpi and I forgot to set it when was saving to png. I have fixed dpi and updated files on brickshelf. Clear you cache and download them again.

Good luck

Edited August 28, 2011 by NickAb

[Master Sam]

I'll do if needed.

Once again, thanks for your work, they look very good, though you think they need some improvements! Let me know when you made the final version with the face, there's no hurry, since I have to buy some water slide paper

[Bricky0]

Could someone make a head and torso decal for this? http://bit.ly/onNdzj

[NickAb]

I'll do if needed.

Once again, thanks for your work, they look very good, though you think they need some improvements! Let me know when you made the final version with the face, there's no hurry, since I have to buy some water slide paper

I haven't been making decals for sometime and managed to mess with decal size a little.

Here is a fixed decal with face.

Flesh version:

Yellow version: http://www.brickshelf.com/gallery/DarkoAb/Decals/Red-Dead-Redemption/john-marston-yellow.png

PSD is available at http://dl.dropbox.com/u/13013314/Bricks/Red%20Dead%20Redemption/JohnMarston.psd

Please tell me if there is any errors with size or proportions.

Edited August 29, 2011 by NickAb

[NickAb]

Hi! I was just wondering if someone could create a desert kevlar vest decal with a radio and pouches to fit a minifig vest, and some leg decals with kneepads, boots, and pockets. Thanks very much! No rush at all, take your time.

Hello.

Check these decals

Sand Armor http://www.brickshelf.com/gallery/DarkoAb/Decals/ModernWarfare/desertarmor.png

Grey Armor recolor http://www.brickshelf.com/gallery/DarkoAb/Decals/ModernWarfare/desertarmor-gray.png

Feel free to use. No attribution required, but always appreciated.

Edited August 30, 2011 by NickAb

[Bounty Hunter Supreme]

Hello, I would be extremely grateful if someone here in the MCW could make decals for the heads, torsos and legs of 4-LOM and Zuckuss for me. Thank you in advance to whoever makes these requested decals.