Richpepperell Posted August 19, 2017 11 hours ago, Robianco said: I actually think this head works well for Evazan: https://goo.gl/images/zZHqY4 Where's this from originally? POTC? Share this post Link to post Share on other sites
Koralunderthesea Posted August 20, 2017 3 hours ago, Richpepperell said: Where's this from originally? POTC? The lone ranger, possibly Butch Cavendish? Share this post Link to post Share on other sites
NivlacSupreme Posted August 20, 2017 Am I crazy or did I see dual molded boots for the Rebels Officer and Tarkin? Share this post Link to post Share on other sites
Daddy_Stardust Posted August 21, 2017 18 hours ago, NivlacSupreme said: Am I crazy or did I see dual molded boots for the Rebels Officer and Tarkin? Haven't scrolled through to confirm, but I believe they were erased legs from the female ghostbusters. Share this post Link to post Share on other sites
Richpepperell Posted August 21, 2017 Does anyone know if there's ever been dual molded gun metal grey/black legs - on a Batman for example. The new TLJ FO officer had a different colour scheme to the TFA ones. Share this post Link to post Share on other sites
thebutkiker Posted August 21, 2017 Updated Thrawn and Yularen with the CMF Chef and Sushi chef legs Share this post Link to post Share on other sites
Dr Cornelius Evazan Posted August 22, 2017 (edited) On 19/08/2017 at 6:47 PM, Robianco said: I actually think this head works well for Evazan: https://goo.gl/images/zZHqY4 Awesome! Just what I was looking for, although I would probably prefer it if it had the deformed right eye! Edited September 2, 2017 by Dr Cornelius Evazan Share this post Link to post Share on other sites
joeyl19 Posted August 22, 2017 (edited) On 22-8-2017 at 1:40 AM, thebutkiker said: Updated Thrawn and Yularen with the CMF Chef and Sushi chef legs <snip> That Thrawn looks awesome! I may have to pick up those legs for mine. I think Yularen would look better with the same legs as Thrawn though. Edited August 25, 2017 by BEAVeR Please don't quote images Share this post Link to post Share on other sites
Daddy_Stardust Posted August 22, 2017 2 hours ago, joeyl19 said: That Thrawn looks awesome! I may have to pick up those legs for mine. I think Yularen would look better with the same legs as Thrawn though. Depends how screen-accurate you're being The black legs and tunic are indeed screen-accurate. Share this post Link to post Share on other sites
joeyl19 Posted August 23, 2017 (edited) On 23-8-2017 at 0:17 AM, Daddy_Stardust said: Depends how screen-accurate you're being The black legs and tunic are indeed screen-accurate. <snip> I did forget about this, but I still think for it to look better, the printing should extend a bit lower. Overall I prefer the dual molded legs, but those ones work as well. Edited August 25, 2017 by BEAVeR Please don't quote images Share this post Link to post Share on other sites
Admonisher Posted August 23, 2017 Here's my own Thrawn/Sushi Chef update, with custom Pellaeon: Share this post Link to post Share on other sites
thebutkiker Posted August 24, 2017 On 8/22/2017 at 2:40 PM, joeyl19 said: That Thrawn looks awesome! I may have to pick up those legs for mine. I think Yularen would look better with the same legs as Thrawn though. I would do Yularen the same but my OCD is kicking in to use these legs to keep it movie and tv show accurate. Share this post Link to post Share on other sites
brickmasterben11 Posted August 24, 2017 Anyone know how to make an Imperial Special Forces trooper like from the Battlefront trailer? I figure an Imperial pilot helmet, but I need some ideas on other parts. Share this post Link to post Share on other sites
Aurelius Posted August 25, 2017 (edited) 9 hours ago, brickmasterben11 said: Anyone know how to make an Imperial Special Forces trooper like from the Battlefront trailer? I figure an Imperial pilot helmet, but I need some ideas on other parts. You mean Inferno Squad agents? I will be basing mine on this MOC (minifigs are the last image on the album). Essentially, I believe they are TIE Striker pilots. For Iden Versio he uses head of Kordi from Freemakers and Padme's hair (shame it isn't available in black). For Gideon Hask I will be using this hair piece. And to simulate their red stripes on right arm, I am going to give these minifigs entire dark red arm. Edited August 25, 2017 by Aurelius Share this post Link to post Share on other sites
JDbricks Posted August 28, 2017 I think this counts as an update. Whether it's a good or bad one is up to you all. lol He's kinda too tall, but I like him. Tell me what ya think. Share this post Link to post Share on other sites
Nokturn Posted August 30, 2017 Since I finally got around to rebuilding 10123 Cloud City, I thought it'd be a good idea to update the figs: I think they turned out pretty darn good. I couldn't find a better torso for Leia, short of using the original, but I wanted to keep the dark red. I don't currently have the funds to acquire the most recent versions of Boba Fett or Vader, but I'll get around to them eventually. Share this post Link to post Share on other sites
K-Nut Posted September 1, 2017 Those are some nice figs! I did the same thing to my Han Solo Now that TLJ sets are out, anyone have good ideas for some of those figures? I'm looking to give Captain Poe Dameron some leg printing but I can't figure out what to use. Any suggestions? Share this post Link to post Share on other sites
Infinite Bricks Posted September 2, 2017 I think that a pair of the dual molded legs from the new Lego Ideas Fishing Store would work well for a Commander Gree, with the olive green and black colour scheme. Can anyone else confirm? Share this post Link to post Share on other sites
gudetamago Posted September 5, 2017 On 02/09/2017 at 2:45 AM, Infinite Bricks said: I think that a pair of the dual molded legs from the new Lego Ideas Fishing Store would work well for a Commander Gree, with the olive green and black colour scheme. Can anyone else confirm? I think because they're unprinted you'd lose more than you gain :/ How do you guys feel about the open backs on TIE pilot helmets? It bugs me but at the same time I don't really like using a plain black head Share this post Link to post Share on other sites
Daddy_Stardust Posted September 5, 2017 (edited) On 9/5/2017 at 0:00 PM, gudetamago said: I think because they're unprinted you'd lose more than you gain :/ How do you guys feel about the open backs on TIE pilot helmets? It bugs me but at the same time I don't really like using a plain black head I've used a few different balaclava heads for all of our TIE pilots and AT-AT drivers, as shown below; all the fun of faces combined with all of the benefit of full coverage at the rear of the helmet. The first is a Lego Star Wars head (got a few of this one), the second is a custom "ski mask" head from www.firestartoys.com (I have many of this one - he can even be used in the vintage open-lensed Snowtroopers without showing any skin because the eye-line is lower than the lens holes) and the third is official Lego from a Scooby Doo set - he's the only one I have of this head, so we've called him the Black Baron to go along with his vintage fighter ace appearance: (You could also use TMNT movie foot soldier heads and I guess even Star Wars Imperial V-Wing Pilots to vary it up if you wanted) Edited September 11, 2017 by Daddy_Stardust Share this post Link to post Share on other sites
brickmasterben11 Posted September 5, 2017 On 9/1/2017 at 9:45 PM, Infinite Bricks said: I think that a pair of the dual molded legs from the new Lego Ideas Fishing Store would work well for a Commander Gree, with the olive green and black colour scheme. Can anyone else confirm? i think if you put a lego batman movie style belt on it it would look alright. Share this post Link to post Share on other sites
Ebkas Posted September 6, 2017 (edited) Resistance Rey hair for Bespin Leia and Depa Billaba?This torso and these legs for Bespin Luke? Also, white utility belts are out! Edited September 6, 2017 by Ebkas Share this post Link to post Share on other sites
gudetamago Posted September 6, 2017 6 hours ago, Ebkas said: Resistance Rey hair for Bespin Leia and Depa Billaba?This torso and these legs for Bespin Luke? Also, white utility belts are out! Wait, white utility belts?! where? Share this post Link to post Share on other sites
Agent Kallus Posted September 6, 2017 (edited) 4 hours ago, gudetamago said: Wait, white utility belts?! where? Is your user name egg related? There is a white belt in the batman bricktober pack, and there may be more in the 2018 TLBM cmf and sets. I though this head gave Anakin a clone wars (2003) look, next to him is Gar Saxon from Rebels. Edited September 6, 2017 by AgentKallus of Hydra Share this post Link to post Share on other sites
gudetamago Posted September 6, 2017 6 hours ago, AgentKallus of Hydra said: Is your user name egg related? There is a white belt in the batman bricktober pack, and there may be more in the 2018 TLBM cmf and sets. Haha yes it is ! (A friend had it saved as a tumblr URL and then let me have it ) Ahh I was looking on bricklink but I guess I jumped the gun. Hope it's on Bricks and Pieces / not too expensive! 6 hours ago, AgentKallus of Hydra said: I though this head gave Anakin a clone wars (2003) look, next to him is Gar Saxon from Rebels. 2003 Clone Wars and Rebels are some of my very favourite things, wish they got more love in terms of sets and figures. Share this post Link to post Share on other sites