Search the Community
Showing results for tags 'snub fighter'.
Found 2 results
-
"You are now entering the Blacktron sector! This is the absolute limit of the Classic Space quadrant! You have been warned!" ...sorry about that. Had to get the legal stuff out of the way first! Anyway: Blacktron long-range fighter "Buzzard" Above is the two copies of the Blacktron XL-15, which are now dubbed the "Buzzard" type starfighter. So back in January of 2023, I decided to convert the XL-15 spaceship from the film "Lightyear" into original Blacktron colors. The blue became yellow, and white was turned to black, with all the trans-green removed. I added laser blasters under the wings where some technic pins are and put a different control tile in the cockpit. I was thinking about building a second ship, but then again, getting some of the parts from Bricklink was a total pain due to extremely low quantities in the needed color. (I'm talking about you, 3 x 3 wedge plate in yellow!) Thankfully, I bought one too many of both kinds of the yellow 12 x 3 wedge plates, as they are very rare as well with only one store selling four of each kind in the USA, which made making the second one easier later on. Blacktron command vessel "Executor" In addition to the two Buzzards, I wanted a Blacktron capitol ship. I had no ideas of my own ship, so I spent most of the afternoon of 10/5/23 taking Benny's beloved spaceship from The Lego Movie and corrupting it into a twisted, evil version. I revamped the nose, removed the expanding wing assembly and snub fighters. Of course I then recolored it almost exclusively in black and yellow. (some gray was unavoidable!) I armed it with a turret on the top rear where the sensor array once was, and put the commanders office below where the wing mechanism used to be. To keep with the one-word naming scheme of the original Blacktron, I borrowed the name of Darth Vader's Super Star Destroyer, decreeing this ship the Blacktron Executor. I struggled to think of an engine flame color that fit OG Blacktron, but eventually trans-light blue was selected. Since the wings don't extend anymore, I added a third section for figures with a turret on top in their place. The rear-most section lifts away, but the rest of the roof sections are supposed to fold open. The ship seats seven troops and 1 commander. Blacktron cargo transporter "Vendetta" The Blacktron Vendetta is finally finished! I combined the Renegade with a new cockpit modified from the Blacktron Cruiser GWP, with added parts from a free Rebrickable MOC's instructions for a Cruiser / Renegade adapter . The cargo pod is reverse engineered and modified from one posted in a Brickset article. You can view the Rebrickable MOC by user Brickstertwo here while the Brickset article about modifying 10355 is here. The rear of the vessel. I changed the engines flames from trans-red to trans-light blue to match the rest of my fleet. Same thing with the yellow technic wheels becoming light bluish gray. The cockpit seats one mini-figure, and has two laser cannons just outside the canopy. The removable cargo pod is inspired by one in a Brickset article from late December of last year. It works beautifully with the ship's drop mechanism. The top lifts open on a hinge so you can put cargo inside. Blacktron two-man snub fighter "Avalanche" These ships are Blacktron 1 versions of a classic Star Wars speeder design is mostly taken from set 75204 - Sandspeeder, with portions taken from other snow-based versions of the type as well. All this is wrapped up in a new black and yellow paint job with a trans-yellow windscreen from 75414 - The Force Burner Snowspeeder. I call this ship type the Avalanche class snub fighter, and they will be going with my heavily modified Renegade set and the rest of my Blacktron 1 MOD's. Rear view of the two ships. This type of short-range fighter is usually assigned in massive quantities to defend critical planets with Blacktron bases on them, whereas the much more capable and deadly Buzzard type is usually for capitol ship escort duty, and can take on much bigger vessels with only a dozen or so fighters. The inside seats two figures. Blacktron armored ground transporter "Marauder" The 2021 Star Wars set 75311 (Imperial Armored Marauder) has been transformed into a Blacktron 1 version, complete with revised guns instead of those annoying flick-fire things. I couldn't use space seats inside this one, but there are plenty (four) 2x2 modified tiles with just enough room for air-tanks in the model... at least I hope that will be the case! The rear of the hover-vessel with the laser turrets rotated. There are eight total opening hatches on the all four sides and top to place figures / store cargo. One figure sits in the rotating rear turret, two troopers sit in the main body of the vehicle, while the last fig sits in the drivers seat. Blacktron giant robot "Destructor" For this model, I used parts and ideas from the Eternals line's "In Arishem's Shadow" set 76155 (body / head / upper legs / upper arms) along with claw from the old Agents 2.0' "Robot Attack" set 8970. The lower legs and laser arm are (modified) holdovers from the "Build Better Bricks" Iron Giant instructions. (I need to fix the laser arm's elbow joint but I keep forgetting!) Blacktron "Shadow Runner" space car Recently, while I was on my Blacktron kick, I decided I needed a vehicle for the commander. So, after a few false starts with other models, I dusted off this old TRON Legacy Light Runner model and went to town modifying it. The model originally was made five years ago (was 2018 really that long ago?!?), and is based off the two-seater TRON set 21314 MOD that was made by BrickBrosUK and posted on Brickset here. The name Shadow Runner is a play on the Light-based vehicles from TRON. Blacktron minifigs 1x commander 4x officers 19x troopers 1x robot (E.D.G.A.R.) (Thanks to my brother for giving me ~10 of his unwanted Blacktron torsos from the old GWP that were purchased from Pick-A-Brick back in 2023.) Blacktron robot "E.D.G.A.R." This model is recolored and modified from the E.R.I.C. robot from set 76831 - Zurg Battle - from the Pixar film Lightyear. I call this one E.D.G.A.R. which stands for: Electronic Data Gathering / Assimilating Robot Blacktron space base "Outpost 13" This sandwich-looking model was built from an 2002 Alpha Team set 4795 (Ogel Underwater base and AT sub) but heavily modified to fit into the Blacktron I theme. I had to fill in the spots where the flexible plastic "window' pieces were, replace the skull logo with the upside-down Tri-Force logo of Blacktron I, find ways to make the model almost totally "air tight", and add on a radar dish instead of a harpoon gun. I also made the building a lot deeper - about eight studs. The rear of the model. I took out the fancy spinning wall of the original set and replaced it with a bank of windows. The radar installation and it's tower are my own design. As on the original set, the logo folds down, where it can be used as a ramp. Also as on the original set, the MOD folds open to access the inside details. Special shout out to Jon Mo who designed the brick built Blacktron logo I used on my model (thanks also goes to EliteGuard01 for finding that logo design and recommending it to me). The inside was very hard to figure out, as most space furniture is for me. I decided on six computer stations and a desk for the commander. Another source of trouble was to make the building open cleanly and close without holes. The original set struggled with this, and it failed miserably - however I feel I managed to fix that issue. Inside of the rear with the commander's desk front and center. Blacktron hover tank "Havok" I modified 25 year old Star Wars set 7155 (Trade Federation AAT) into Blacktron I colors. Before that, the original set was very much a mess of too many colors, but now these two look elegant and refined in my opinion. Here is the rear of one of the tanks with turret rotated. The hatch is opened with control details visible and barrel elevated. Thoughts? Snub fighter added 1/21/26 -
Hello again everyone, This time I present 6 models from Season 3 of The Mandalorian! Let’s get straight into it shall we? GAUNTLET FIGHTER/TRANSPORT The Kom'rk-class fighter/transport, also known as Kom'rk Class fighter transport or the Gauntlet starfighter, was a type of starfighter and troop transport used by the Mandalorians and seen first in the Clone Wars animated series. This model initially started off being planned as a mod of the old official polybag of this set but turned in to a complete rebuild. Most of the parts have been used but a lot more have been added. The cockpit section and rotating mechanism completely replaced. That newish technic brick with the 1 x 2 plate attached was perfect for the attachment of the wings. I have also tried to make the colour scheme the same on the top and bottom of the wings, something the polybag didn’t do. I also like how the bar for the front cannons on the “Bar 1L with 1 x 1 Round Plate” pieces sit in the plate notches of the 1x2 wedge pieces on the front of the cockpit section. I have kept the classic white and dark blue colour scheme used in the animated series. I really like this model. Displayed with Bo-Katan. FANG-CLASS STARFIGHTER The Fang fighter was custom-built for starfighter combat, and the vessel's narrow attack profile and pivot wing technology could be used to achieve unmatched agility. This fighter again was first seen in an animated series but this time Rebels. I was disappointed we did not see enough of this fighter in The Mandalorian to tell whether they were still using the pivot wing which allowed the cockpit to spin much like the B-Wing but with the cockpit in the middle of the space frame and not on the outside. The official LEGO model of this also does not spin but I don’t think that really tells us anything as the designer was probably just given stills from which to base the model. My little model however does spin! It spins simply on an axle piece through 2 technic bricks on the body and can be turned by using the main engine assembly as a wheel. The curved slopes for the cockpit fit quite snuggly to the 2x4 wedge plates on the body so there is only a small gap. The new 2 x 6 wedge plates are perfect for the front fangs which are finished off by 1x2 wedges. Another thing wrong with the LEGO model is the position of the cannons which should be at the front. I have of course fixed that too on my little model. I have also used the same colour scheme as my Gauntlet rather than white and dark grey the LEGO set uses. Displayed with a Mandalorian Warrior. CUMULUS-CLASS CORSAIR The Cumulus Class Corsair was a type of corsair ship used by the Pirate King Gorian Shard (who we will come on to later). This model ended up being a little bit bigger than I would normally like to build but I really wanted to use those Modified 4 x 4 with 3 x 3 Curved Cutout pieces for the shape of the wings. The shape also needed the 2x6 wedge plates for the front section so before doing anything else the model was 14 studs long. I have used various inverted slopes to get the shape of the hull, switching between light grey and dark blue for the stripey colour scheme which is mirrored as much as possible on the top of the model. There is quite a nice little trick near the front where the two different types of 1x1-1x2 brackets are top and tailed (twice) and attached to the hull in the hole of the 1 x 2 dark blue technic brick right at the front. This allowed the 1x1 tiles and cheese slopes to be attached and create a smoother transition of the slopes on the hull. The stud notches on the 33 degree slopes also double as the recessed cannon emplacements (by accident). The engines were a bit of a problem as the two clusters needed to have 3 engines. It did not look right with 2 so I had to settle for using/stacking the light attachment plates and the bulb pieces as using a 3 plate long configuration of round tiles, for example, would have been too high and looked out of place. It is quite a nice-looking model and think I have got most of the features – there is even a flight deck with Snub Fighters (guess the next model!). It is displayed with a custom Gorian Shard minifigure. If only the yeti/bigfoot head came in green (no new mold required LEGO just recolour this one and you can give us a Gorian Shard figure!), or the Hagrid hair piece or any suitable hair pieces for that matter. In the end I got inspiration from my son’s now defunct Hidden Side sets and used the yellowish green hairpiece from those sets. The gold jacket is atlantean armour and the sash is just made from coloured paper! PIRATE SNUB FIGHTER The Pirate Snub Fighter was a type of snub-fighter that was used by pirates during the New Republic Era. A squadron of these was kept on Gorian Shard’s corsair. This was quite a simple build. I really wanted to use those inverted slopes for the front of the ship as they have stud holes on the back which makes them easy to attach to the hull. I also wanted to use those trans-black slope pieces for the cockpit after I noticed them on one of my old Ferrari sets and thought they were perfect for the job. There is a little trick with the wings at the back as they are angled just by using 2 1x6 plates and they are positioned against cheese slopes to get a consistent angle each side for those who are a bit OCD. I could have built a smaller model than this, but it is by no means huge, and a smaller model would have had much less detail. I also think the pictures make this model look bigger than it actually is. Displayed with an official Snub Fighter Pilot minifigure. QUARREN FREIGHTER A Quarren freighter was operated around 9 ABY by Shuggoth. This ship came under attack by Mandalorian Axe Woves' privateer fleet. This was not a tricky build, but I wanted to get as many of the ‘antennas/spikes’ into the model as possible. The colour scheme of the model was also determined by part availability. It’s a shame the Bar 1L with Angled Hollow Stud pieces do not come in brown (yet?) so the nearest colour I could use for the antennas was medium nougat. They are ‘fine’ but would look better if the model was all the same colour. The trickiest part of this was to try and keep the organic feel in LEGO that all MonCal/Quarren ships have. The build is basically just a stack of round plates with a wedge piece on top. The fin at the bottom is just attached to the main hull with jumper plates. The model does the job and is recognizable at the scale. Displayed with a custom Quarren Officer. MODIFIED N-1 STARFIGHTER This was originally built a while ago for Book Of Boba Fett but as it is a major ship in Series 3, I have added it here too for completeness. As we know a modified N-1 starfighter was owned by Din Djarin following the destruction of the Razor Crest (grrrrrrr!). Djarin and the mechanic Peli Motto worked together to build the N-1 starfighter as a replacement. When I first thought about a model for this I thought just changing the colour scheme of one of the official Naboo N-1 polybags would do the trick, but once I did that, I realised I wanted more detail. The model grew from wanting to use the plate with two handles for the guns at the front but to do this the wings needed to be upside down (as the handles are offset slightly below the plate) and so an idea was born. The front is inverted using brackets attached to a technic brick with 2 holes which also allows the body to incorporate the third engine at the rear. Flipping the wings at the front also allows the “turbo” to be added in front of the cockpit in the stud hole in the bottom of a 2 x 2 tile with 2 studs. The tail is attached using one of those 1x1 round plates with a bar. Overall, this was quite a tricky little build with a lot of parts interacting to keep the size and shape this small. A few flat silver and gold pieces are also added for detail and contrast. Displayed with Peli Motto, because you know, Mando is on my Razor Crest display. Let me know what you think. Jon Full Bricksafe gallery can be found here: https://bricksafe.com/pages/obijon