tin7_creations

I think FireHawk is going to be casting them in resin.

I'm glad everyone loves them, I knew the minotaur would be a great hit. I hope that FireHawk will be able to offer them in different colors.

I asked FireHawk302 to cast some of my Sculpey creations in resin for sale. Here are the pieces that will soon appear at his store BrickMaker Customs. Spiky Hair Swept Sideways: Female Hair with Ponytail: Minotaur: Female Hair Swept Sideways: Hair with Beard: Chinese Qing Dynasty Hair: These items will soon appear at BrickMaker Customs, stay tuned here: http://www.brickmakercustoms.webs.com/ ~tin7

ooh, i love the motorbike, now, if only it can light up and glow in the dark too. ....

LuxorV asked me to make a Sculpey tutorial, so here it is. Tools Required: - 2-3 useless/spare minifig heads - 2-3 useless/spare minifig torsos - Some useless/spare LEGO bricks to make a stand. *Note: The Sculpey will damage all these useless/spare pieces, so the use of any rare or single pieces in the sculpting process is at your discretion/risk. - Aluminum foil (cut it to a rectangle of about 2cm x 2.4cm) - Small sharp objects (I use 2 small screwdrivers; they are about 8cm long, the tips of the screwdrivers are about 0.1cm). These will be used for sculpting; like small chisels etc. - Sculpey in the colors of your choice; you can also mix 2 different colored Sculpeys and get a new color. Choose your colors carefully if you don’t want to do a paint job. - Toaster oven or small pot Other required tools: - Pen & Paper - Exacto Knife (optional) - Super glue (optional) Designing: The design of your piece is very important. So before you do anything, start with a good old pen and paper drawing. It doesn’t have to look nice, just a rough copy so that you know approximately what you’re doing. On the paper you will need to draw 4 LEGO heads. Here is my Sculpey Design Sheet (4 views), and you can draw your design onto the heads similar to the second picture. It is important that you know approximately what all four sides of your piece looks like. Then, when you are satisfied and done, you can begin preparations for sculpting. Build A Stand & Other Preparation: Firstly, you do not have to use the spare pieces that I used to build the stand; just use anything that you are comfortable with destroying. Here’s my stand: Before you start adding the Sculpey, you need to add a layer of aluminum foil. The Sculpey will stick to the minifig head if you model directly on it, and it will be impossible to pull off. Therefore, the aluminum acts like the stuff you spray on cookie sheets to keep the cookies from sticking to the sheet. Take the 2cm x 2.4cm rectangle and wrap it around the head, like this: Make sure that you wrap around the stud as exact as possible, or your finished product will be very loose on the minifig head. You may ask, “Why do we need 2 torsos and 2 heads?” Reason: One head will be used for modeling/sculpting; the other will be used when you’re painting. A third one, if needed, would be used for boiling (more on that later). Modeling: Unfortunately, I cannot teach you how to make anything. Like with everything else, modeling with Sculpey takes practice. The more you do it, and the more time you spend on each headpiece etc, the better you get at it. So, instead of teaching you how to make an exact object, I’ll teach you some techniques that you might find useful. Base: First off, you need to make the ‘base’ of your headgear. This involves squishing a small ball of Sculpey right on top of the stud of the head, which will allow the headgear and the head to fit together (like a normal LEGO headpiece). Here is what it looks like: Then, use Sculpey and surround all the aluminum foil covered area. Like this: This will create a solid ‘base’ or ’bottom’ for your head piece. Adding Hair: Now, you may think, is this it? This doesn’t look like some of the stuff that you’ve made. True, maybe you have seen these headpieces that I have made: What’s the difference between these pieces and the ‘base’? Well, these pieces have hair! How do you make hair then? And how do you add it on? Basically, you have to make every single strand of hair separately, and I’ve only found one technique that does this best. First, you take the Sculpey, and roll it into a string: Then, using your utensil (in my case, the small screwdrivers), you slice off a small piece the length of which you want the strand of hair to be. Sculpey is somewhat adhesive; therefore, it would stick to the tip of your ‘utensil’. Then you merely take the strand of hair, and place it upon your ‘base’. You can place the hair wherever you want depending on your design. Afterward, I would use the sides of my screwdriver and roll in between the crack of the hair and the ‘base’; this will allow the Sculpey from the hair and the base to meld together. Past this point, there is really nothing I could teach you. Most of it is fairly intuitive, and requires lots and lots of practice. Just have fun with your Sculpey! Modeling On Top Of Existing LEGO Pieces: Now there may be a time when you don’t want to create a completely new piece. For example, in the picture below, I really like the back of the Hermione hairpiece, but I wanted to add a band, and strands of hair to the front, so I just sculpt directly onto the original hairpiece. Here, I used the same hair strand technique to add to the Hermione hair. A paint job will be required usually, unless you are skilled enough to ‘match’ the two separate colors with your Sculpey. As you can see in the second picture, after the paint job, the ‘addition’ to the original piece is not quite as obvious. One thing to note though is that the curing process (which will be mentioned again below) must not be baking. The LEGO piece is plastic and it will melt if you bake it, so choose to boil it instead. Most important of all is you must boil it with both the minifig head and the aluminum foil. This is important, because the original Hermione hairpiece will shrink after it is boiled, the minifig head, and the aluminum foil will prevent it from shrinking, so that the headpiece will still fit afterward. Curing Methods: Curing is the technical term used for ‘hardening’ the Sculpey. The instructions for curing methods should be on the packaging of the Sculpey or clay that you use. I prefer Sculpey over clay, as the finished product of the Sculpey is softer and lighter than clay, and more similar to LEGO. There are two ways to cure Sculpey that I use: 1) Baking the Sculpey in a small toaster oven. You don’t have to buy a small toaster oven, just use anything similar around the house. On the package, it says: “Bake at 130C for 15 minutes per 6mm (1/4”) thickness. DO NOT overbake. DO NOT use in microwave oven. All baking should be done by an adult. Do not place uncured clay on furniture.” ~ Sculpey Quite frankly, I’m not going to measure how thick my Sculpey pieces are. Much too tedious. I set the oven on 130C and just stick the thing in there for about 10 minutes. 2) Boiling the Sculpey in a small pot. Boil a small pot of water, when the water has reached a boil, put your Sculpey model into the water, cover the pot, and let it boil for about 7-10 minutes. Take it out, and wash the pot very thoroughly. One important thing to note is your use of armature. By armature, I mean the parts that you add to the Sculpey to shape it. This is why I prefer boiling over baking. Sometimes I would add stuff like toothpicks and small wires to shape the weapons/utensils. Other times, I would use the minifig head, helmets or torsos in my modeling. These items absolutely CANNOT go into the oven toasters. Reason: They will melt, and catch fire, which will cause your toaster oven to explode! Bye Bye house. Mistakes: Now, you may ask, “What happens if I made a mistake on my creation, but didn’t know about it until after I cured it?” There is one simple way to fix this. Use an exacto knife, and just shave it until you get what you want. How much you shave off of the creation is up to you, alas, it is something that cannot be taught. Shaving excess off will create scratch marks on your creation, no worries; the paint job will hide all of that. This is one reason why I choose to make my creations just a little ‘bigger’ than necessary. Just in case I make mistakes, I can shave off the excess after curing. Also, one thing to point out is that baking will make the Sculpey harder than when boiling it. Boiling will give you a softer texture, thus easier to remove/fix mistakes with your exacto knife. Don’t worry though, visually, you can’t tell if it’s baked or boiled. One thing I run into a lot after curing the Sculpey, is that, during sculpting, some of the bends/joint areas might be weak, and once the Sculpey hardens, it becomes brittle and falls off (same can happen while fixing with your exacto knife; accidentally cutting something off is nothing strange). Super glue works really well in this situation. Re-curing? After your piece is completely finished (modeling, curing, fixing), then you might find that you want to add stuff to it. This does not mean you have to re-cure it. Truth is, I can’t tell you if re-curing is possible. I haven’t tried it myself; someone once told me that he saw no reason why I couldn’t re-cure it. However, some of the pieces I make take hours and hours to model, and if re-curing might destroy it, I don’t want to take that chance. So if anyone does manage to try re-curing, you are very brave, and please tell me your results. What you can do in this situation is use your first Sculpey creation as a base, and model on top of it. Afterwards, just cure the ‘add on parts’ and super glue them onto the Sculpey. Yes, you can super glue Sculpey. Again, I must stress that at this point, you still DON’T need to worry about what it looks like, because the paint job will cover it up any glue residue, or scratch marks, or anything else that might be on the piece. Painting: Sculpey cures into a very fragile and brittle texture. Because it can be easily wrecked, I paint my pieces with acrylic paint. Acrylic paints are thick and don’t absorb into the Sculpey like watercolors or sprays do, therefore, once dried, it forms a protective layer over the Sculpey. Painting Sculpey is the same as painting anything else, take a brush, mix some colors and go for it. Just don’t drip paint onto the carpet, acrylics are a pain to clean out. The most important part is to enjoy the process, the more you enjoy it, the more you'll do it, and the better you'll get. If there's anything more that you would like to know (certain techniques, etc), you can leave your replies here, and I'll try to add them on as fast as possible. Once again, Enjoy! ~tin7

congrats to all the winners, and a job well done to everyone who participated!

oh woe! i actually got tricked by megabloks. curse you!!!

wow. these actually aren't bad. i might buy duplo just to get the characters.

i think that in 2011, they should do a Disney Classic series, and bring out some of the classic films... but i think it's more wishful thinking...

oh crap... and here i was hoping for an aladdin theme because of Prince of Persia... sigh... oh well, there's always next year.

o c'mon, don't hate them THAT much. the buzz, green aliens, zurg and army men are gold... the rest... are duplo.

i cannot believe this... our indiana jones decal index does not have a marion ravenwood face decal. would anyone mind making this? here's a pic: http://www.bricklink.com/catalogItem.asp?P=3626bpb284 if you can make both sides of the face on separate decals that would be much appreciated, thank you so much!

??/ Am I missing something here? I thought it was only Toy Story and Prince of Persia in system, and Cars in Duplo... so that's system sets for 2 movies... did lego and disney announce 2 more movies they are gonna make?

ooh i would like that. those neon motorbikes have me imagining that they could create a glow in the dark motorcycle mold...

FireHawk, I was actually going to pm you this message, however, you're new, and the pm function doesn't work with you yet. So i'm just going to ask here. I make a lot of custom headpieces with Sculpey, however, they're extremely fragile and easily broken. So I was wondering, is it possible for me to mail you these pieces and have you recast them in resin for me? I would ask how much this would cost, but apparently, you can't mention prices here... ~tin7

i see high possibilities for the PoP pieces to be re-used if LEGO ever decides to make Aladdin for Disney.

modern hairpieces that would work well in city sets.

I think the actual translation of the characters name from Chinese is actually Sand Monk. In English, the guy can be either known as Friar Sand, or Sandy. I chose to use Sandy cause it's much shorter to type.

This is my addition to the LEGO Heroes theme, mythic heroes from China. The four main characters from Journey to the West. Tripitaka: Monkey: Pigsy: Sandy: Group Shot with weapons: All the Sculpey headpieces and decals are my own custom design. Enjoy! ~tin7

i finally figured out what's bugging me about the toy story figs, spent all night looking at them... the buzz, zurg, prospect pete, army men, green martians are all pretty great... what bugs me are woody and jessie, it's not the extra long legs, i dont' mind those, i've always been looking for a new mold like that.... it's the wide brim hats... the hats are too big for the actual fig... don't know if anyone agrees with me...

ok... the 3 eyed green martians have become my favourite of the new toy story minifigs. they are EXACTLY how i would have made them.

i agree completely, the only one that looks remotely decent is Sam the Prospector!! as for potato head... disney had the rights to him, so therefore, i believe that since lego has the rights to disney, lego has the rights to potato head as well...

will there be 3 eye green martians for toy story... i wonder... and mr potato head. how can u have toy story without mr potato head!! but seriously, if they give us rex... they'll probably bring back the green dinosaur, with face print.

somehow, by looking at the Toy Story figs... i can imagine that Ben10 would be extraordinarily similar.

im kinda disappointed with the toy story figs... they look too big to be minifig size. i love the PoP ones though, i know i'll end up buying all of them. the toy story sets... i need to see more to decide.