suenkachun

Thanks for that! So the latest Brick Version of LDD is 2248.1 and Part 26604: Brick 1x1, W/2 Knobs, Corner has been added.

I just checked and nothing popped up on my LDD programme (Windows version), and on the LDD website it still says version 4.3.10, therefore could you explain a bit more on what you meant, such as which programme you are refering to and LDD’s latest version number if it’s LDD you’re talking about? Thank you very much.

Here's another request of mine: the "Hinge Bucket 2 x 3 Curved Bottom, Hollow, with 2 Fingers" (Part 4626). I couldn't find on Brickset but it was listed on Bricklink here. Although this seems to be an older brick which only existed between 1984-2001 (timeline taken from Rebrickable) some of our construction vehicles could benefit from a smaller bucket as most diggers nowadays have huge shovels/technic shovels which are at least four bricks wide (I've also seen some great Mini Diggers which utilise this smaller shovel very well, such as this mini excavator).

First of all, a warm welcome to the Forum as this is your very first post. There are actually two different ways to take screenshots in LDD, so depending on what you want you can choose to use the corresponding method. All screenshots will be outputted as PNG images. The first one is to go into "View Mode" (the icon is in the top right corner or just press "F6") and use the "Screenshot" icon in the top right corner (or just press "Ctrl+K"). When you're ready just click it and save your image. Before you output your screenshot you can choose from one of the four backgrounds provided in LDD by clicking the "Change Background" icon on the top left corner (or just press "Ctrl+F"). Many projects on Ideas use this method as it's the default one and is the easiest to do. However, in my opinion those four backgrounds actually make the project screenshots look unprofessional and with more colours at the back you can't really focus solely on the model. Therefore, my preferred method is to stay on "Build Mode" (the icon is also on the top right corner and you can click it or press "F5" if you're in another mode) and take any screenshots from there. Either click on the "Tool Box" drop-down menu at the top left then click on the "Take A Screenshot" option near the bottom or just press "Ctrl+K" when you're ready, then save your image. This will produce screenshots with a White or Transparent background which helps to focus them on the model being shown. The above two methods will only screenshot your model but not involve any parts of the programme itself, such as the menus and icons. If you want to include those in your screenshot such as for reporting bugs and errors then you need to use the "Print Screen" function of your computer to capture the entire screen, then paste it into any image editing programme (Paint/Word/PowerPoint/etc.) and edit it from there for further use. Hope that this has been useful.

I found another bug with the Mini Heads (Part 3626) in the menu. As shown here the two Mini Heads in the red box are repeated where they are just in the opposite directions. Since this Mini Head actually has two designs with one on each side maybe that's the reason why two copies were added accidentally.

Here are four more bugs in LDD. 1. When I was using the "Hinge Tool" I discovered this glitch where the text box for inserting values will overlap the curser and the little yellowish box. 2. When building a statue I discovered this tiny collision error where the vertical studs will actually collide with the Plate With Bow in front by about half a milimeter! Although it's very minor a collision error is a collision error which means that it's not possible in reality. 3. When building a car I discovered this collision error where the tyre is allowed to be inserted into such a narrow space! The two exact tyres involved are Tyre Ø17,6 X 6,24 (Part 42611) and Tyre Ø17,6 X 6,24 (Part 92409) where both can be inserted as shown in the image. In fact you can even place bricks directly next to the two tyres on both sides without having to use them properly in a build! 4. When building the same statue in no. 2 I also discovered this situation where the bottoms of the two slanting bricks have vanished for no reason, but when youre dragging them along like this the bottoms of the bricks have reappeared as usual, so this error only happens when you insert the bricks into place.

Thanks for posting about such a cool feature, not noticed by many before!

Here's another bug which I found recently. Referring to this screenshot I have used the new 1/4 Circle Tile 1x1 (Part 25269) in Black for the curved edges of my Grand Piano, but the two Studs beneath the two Curved Plates have disappeared for no reason! To get them back on you have to select the Tiles and place them back onto their original locations, but here's an interesting glitch when doing that: if you move them one by one the first one will be recovered, then when you move the second one and fix it the first one will change back to unrecovered, therefore you have to select all of them and move them in one go! As I actually have three groups of two Circle Tiles on my Grand Piano I tried moving them two by two, then the first two changed back to unrecovered after I moved the second two. However, after you move the Tiles your file has nothing to save so you might have to move them every time you reopen your file.

Fair enough. I was just so excited to see some of the new parts there!

There's more to add: all the new Bricks, Printed Parts and Decos from Set 10255 Assembly Square, including 2x2 corner tiles with a cut corner in four colours, 2x2 and 4x4 'macaroni' tiles, 1x1 brick with studs on two adjacent faces and Door frame, 45 degrees! More details can be found in the following article on Brickset: http://brickset.com/article/24035/10255-assembly-square-new-parts-galore.

I'll have to correct my earlier post, as although the Speedometer is back in the correct place, you can still decorate a 1x2 Flat Tile with this deco. Therefore, unless LEGO actually releases such a design in reality this deco should be removed from the 1x2 Flat Tile range.

I don't know who to email, but I totally agree with what you have to say! Adding to that there should be larger Decal Palettes as the current tiny size makes it really hard to find a particular Deco! Oh, and don't forget to enable scrolling with your middle mouse on all Palettes!

Me too, as quite a few of my requests for bricks to be added were finally added, so thank you to LEGO anyway.

Just Googled Roof Tile 2x6 and no results either. Maybe it's an unreleased new part?

OK, but at least the Speedometer is back in the correct place.

How about the two on the 85984?

Yes. Check my earlier reply. There are two new Minecraft decision on two 1x2 Bricks respectively and the two decos on the 85984.

You're welcome. As a Grand Piano has curved edges which requires curved Plates for the cover you normally have to leave it like that as there are no curved Flat Tiles. LEGO did that with Bruce Wayne's Piano as seen in the upcoming movie's trailer, but in my opinion Flat Tiles are still the best, so having this piece enabled me to use Flat Tiles up till the curved edges then fill the gaps up with the new piece (two for each edge). Although they're still not covered perfectly that's better than nothing. I'll add a screenshot later to show what I mean.

I've moved the contents of my posts back to the correct topic, so here are more new things in the update. Part 85984 can finally be decorated with the "Police" and "Speedometer" decos (meaning that the second one is not found on the Flat Tile 1x2 anymore as seen from the previous update). The 1x2 Brick now has two new Minecraft decos: "TNT" and a pink one. Part 25269 fixes my Grand Piano so thank you for that! Also just found part 23949, and now I have to go through this painful process of updating all my roofs!!!

Just go here for the new update and more info: http://www.eurobricks.com/forum/index.php?/forums/topic/141041-ldd-4310-update-released/.

Finally LDD Version 4.3.10 is out, can't wait for more details of the update!

I don't know if anyone has reported this bug before, but Part 43888 Column 1x1x6 has the same problem with the Metalized Tube mentioned in the quoted post, where one can see through the sides when viewing the inside of the hollow Stud from the top. After testing I found that this issue with both Bricks is only present when the Brick is securely inserted in LDD, but when moving the two Bricks around the issue is not found.

And I think it’s about time for all the new parts in Set 60134 “Fun in the Park - City People Pack” to be added to LDD, especially the Baby, Wheelchair, Decos on the Dog and other printed parts (such as the “Bus Stop” Sign and various “Mini Upper Parts” of the Minifigures).

Here’s one more Brick for LDD: the Hot Dog Bun/Bread Bun (Part 25386) in Brick Yellow, as it’s about time we had a new type of food in LDD! To make this work the Bun must be able to accept the Sausage (Part 33078) inside it.

Here's another collision error I just found. As seen here, a Minifigure is standing in front of a table built out of Cupboards with a Plate on top (with a one Brick gap in between the two) but in this case it should be impossible for the Minifigure's arms and hands to be rotated to an upright position (Right Arm: 0° and Left Arm: -180°) and other nearby positions as the edges of both hands are colliding with the edge of the Plate/Cupboards beneath. However, the weird thing is both the entire Minifigure and all parts of the table were NOT REMOVED after I restarted LDD!