Jump to content

9v system

Eurobricks Counts
 View Profile  See their activity

  • Posts

    1,131

  • Joined

  • Last visited

 Content Type 

Everything posted by 9v system

  1. 9v system
    you need to make sure that there is an even amount of slack on each side, you should be able to advance one side a couple of turns ether direction, so you should be able to get it set so the lift arms dont come off by the worm gears
  2. 9v system
    @Ankoku also @FernandoQ has done a nice set of instructions for the compact spiral lift here https://bricksafe.com/pages/FernandoQ/akiyuki-spiral-compact
  3. 9v system
    sure, can do, i had added some 200px renders of the peanuts and heart chain for the front page
  4. 9v system
    @Lego_GBC_NL did you find what was causing the problem with your build?
  5. 9v system
    https://bricksafe.com/pages/gbcbuilder/akiyuki
  6. 9v system
    greetings all i have been very busy over the past two weeks creating files for these modified Akiyuki modules by Klaus Hansen, a GBC builder from Denmark im testing the 5 heads one just waiting for the parts to arrive @Ankoku the files for these are on my bricksafe 9v system
  7. 9v system
    very nice @Doug72 i like how you even keeped the black ring thing on the end of the unloader as well
  8. 9v system
    very interesting, this will make a great parts pack
  9. 9v system
    @ixodie about the sprial lift, i unfortunately havent had the time to do that output sorry, but its very similar to the one used on the wheel and steps module @Bird_Anatta any updates on your factory? i look forward to seeing it all running
  10. 9v system
    thank you, i hope you can post some video of your modules at some point, for modules like the zig zag lift and pneumatic there are updated versions on my bricksafe
  11. 9v system
    i have gone through the whole module doing changes to steps removing the wires and string, putting things in the right order, it looks alot better and its buildable now heres the updated instructions https://bricksafe.com/files/gbcbuilder/akiyuki/gbc-to-and-fro/to-and-fro-gbc-module.pdf
  12. 9v system
    @Berthil are you able to send me the file for the wheel lift part? i promise not to share it anywhere, it would be great if i could get this so i can can start on the tube run part of the module Thanks
  13. 9v system
    fantastic, will keep that in mind, do you have any more photos of the module?
  14. 9v system
    Hello Berthil, thank you for doing the instructions for this module, like @rskamen im also going to build the sorter part instead of the tensgrity part as i have some servos and remotes that i have never used, so i would love to use them for this. are you ok if @dunes and i do a file for the color sorter? Aron
  15. 9v system
    greetings all, i have created a set of PDF instructions from the Ldraw file posted above https://bricksafe.com/files/gbcbuilder/akiyuki/gbc-to-and-fro/to-and-fro-gbc-module_copy.pdf a part list is also available https://bricksafe.com/files/gbcbuilder/akiyuki/gbc-to-and-fro/to-and-fro-gbc-module_Copy.xml let me know if there are any errors Aron
  16. 9v system
    @Ankoku i created this render today, i think it would make a good header for the first page as its bland without one theres a bigger version in my bricksafe if you need it
  17. 9v system
    greetings all heres an updated version of the pneumatic module,, it has some changes to one of the racks and the change of the 12 tooth bevel to a 16 tooth gear which is what akiyuki uses. @Ankoku could you add this to the main thread? also thanks to @jesuskyr for the pneumatic file https://bricksafe.com/files/gbcbuilder/akiyuki/pneumatic-gbc/pn_main_Copy.io
  18. 9v system
    this might be a good one to do as well the output part is @OneMoreRobot design, i will see if i can make a file for it
  19. 9v system
    anyway, did you see the new zig zag design i did? i only build from new parts so i have ordered the parts and will test it. i have been rebuilding my modules in the past year or so from only new parts
  20. 9v system
    funny enough i had this issue a few years ago too as well on the same lifter, i could never figure it out but i replaced the 8 axle with stop, that axle can be slightly bent which can cause this problems
  21. 9v system
    if everything is connected correctly, it only lifted when there is a ball present does it lift when a ball is inserted?
  22. 9v system
    hello and welcome first of all have you made sure that the cranks are all connected to the drive axle? this video below may help
  23. 9v system
    i have been working on the akiyuki zig zag module, i designed a new drive system that moves the crank up higher which stops the slider binding
  24. 9v system
    ok, are you able to upload those photos again please? i need to see how many tread links are used as i think this may be the issue
  25. 9v system
    heres my first trial type 1 train layout (crane is not finished yet) it worked mostly well had the L motor version of the train as well however i had problems with the loader switch, it keeped jumping forward 1 tooth every half turn, @Lego_GBC_NL did you have this issue?
×
×
  • Create New...