Jump to content

9v system

Eurobricks Counts
 View Profile  See their activity

  • Posts

    1,131

  • Joined

  • Last visited

 Content Type 

Everything posted by 9v system

  1. 9v system
    @Lego_GBC_NLthose two 1x4 thin liftarms in black are moved forward one hole on mine so that only two holes are on the 1x9
  2. 9v system
    try sliding the yellow connector on the 9l axle on the L linkage inwards towards the yellow 6 connector as it think it might be to far out
  3. 9v system
    @Lego_GBC_NL i slid the yellow bushings out at bit so they was a gap between the yellow connectors and the bushes , slide the inside bushes closer to the chains abit and see what happens
  4. 9v system
    sure
  5. 9v system
    here are my new files for the type 1 train L motor train, switch and loader switch
  6. 9v system
    interesting, i just prefer to watch all the mechanics of it, not really into software as such
  7. 9v system
    @Ankoku do you have access to the mpd files for the modules in this thread? i really need the ones for the type 1 train, the crane, simple loader and unloader dont worry i have found them thanks
  8. 9v system
    i saw this as well, i dont understand any of the explanation though, the two bucket dumpers is interesting
  9. 9v system
    just checked my PMs but i havent received anything yet
  10. 9v system
    thanks to @Lego_GBC_NL i have produced a file for the loader switch, it is quite simple and runs of the unloader unit by the 24t gear and a universal shaft @Doug72 are you able to add this to the train thread as well please?
  11. 9v system
    thanks @Doug72 theres the updated switch unit there as well @Ankoku those renders are ready for the front page
  12. 9v system
    @Doug72 how did you go? were you able to open it?
  13. 9v system
    you need stud.io to open it
  14. 9v system
    https://bricksafe.com/pages/gbcbuilder/akiyuki
  15. 9v system
    there is an io file in the folder on my bricksafe
  16. 9v system
    @Doug72 just checked, all looks good
  17. 9v system
    Greetings all i have now finished a file for the new version of the train type 1 based off the 2015 japan brickfest video as well as the 2012 video, this version has a ton of toque with enough strength to stop the motor, that problem with the two 4 axle with stops has also been solved by adding a 2x2 tile with a 1x1 plate in front of the axle. @Doug72feel free to add this to the train thread thanks again to @Courbet for doing the instructions for this module
  18. 9v system
    @Lego_GBC_NL thank you for these photos, i plan on recreating this layout with the train, i want to display the crane and simple loader at the same time
  19. 9v system
    @Lego_GBC_NL do you have any photos of your switching device for your type 1 train that selects between the crane and simple loader?
  20. 9v system
    i had to remove the differential on mine, did you see the updated switch i posted?
  21. 9v system
    @Courbet did you have any issues with the differential in your crane loader? in mine it was binding quite a bit
  22. 9v system
    heres my progress on the type 1 switch as you can see it is no longer on a baseplate, which makes it modular for transport, and the hopper stabilizer is added to which stops the car from jumping the hopper off @Doug72 im glad it works for you
  23. 9v system
    heres some good shots i have of the train,i have circled some of the changes in the photo above you can see the L motor circled in orange, the part in yellow i havent seen before other than this video , i believe this keeps the cart on track which was an issue i had with mine as the container would sometimes fall off in this photo you can see the underside of the train is different and the purpose of the white 2x2 tile in blue is to keep the wheels from sliding in and out of the technic brick, also a 1x5 liftarm can be seen behind the white technic brick, when i did this on my train it was so strong i could stop the motor without slipping the gears. this would solve the power issues with the crane @Courbet
  24. 9v system
    @Doug72 with the Courbet version you dont have the issue with the gears hitting switch points
  25. 9v system
    any reason why? also your version of the train works better as i used it last year at brickvention, it prefers to run slower. i would really like to update the type 1 train because it worked well at brickvention with the crane and the L motor unit, its been on my to do list for quite some time
×
×
  • Create New...