Search the Community
Showing results for tags '1:12'.
Found 1 result
-
[MOC] PiPi - small 4WD Drift car
Krxlion posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi everyone! Not so long ago, I presented a WIP project I was working on, a 2WD Drift car. So the question is, why am I showing you this model. Actually, the best answer would be that I gave up too fast on the previous one and immediately move to the smaller scale. During building this model, I came to the realization that the problem with drifting in the previous car was not with tires (although suited drift wheels are much better), but with the floor I was testing it on. From that moment on, I was testing the model in a different place, where the floor is made out of wooden panels. Features Locked 4WD with different speeds on axles(front 1:1, rear 1:1666) Positive caster angle Working front and rear lights suited for Lego Regular Lego 49.5 mm wheels (15413+56145) Opening trunk Powered by RC setup (with gyro function - helps counter-steer) Design After the first failed attempt to build a drift car fully out of Lego bricks, I still wanted to use rubber tires and achieve my goals. In the time I was starting to build the model, there were at least two similar cars posted, which reminded me about @Anto Hoonicorn MOC. I wanted to preserve his idea of front axle in my MOC and enhance my model by giving its rear axle faster rotation speed, thus making it slip faster. The source of power still remained in A2212 BL motor, in the drivetrain you can see that it was geared down by planetary wheel hub. Model is steered by geek-servo directly connected to the axle, which controls the steering rack. Legend (explanation on stud.io bricks presented in the picture above) 4x yellow stacked 28-tooth gears are in fact a A2212 motor Grey bricks shaped in 5x3x3 are in fact a geek-servo More renders and pictures below Non-Lego parts usage RC setup (DumboRC X6FG, 35 ESC SurpassHobby, SOARIN2 S 1300mAh 7.4V 30C, A2212 1000kv brushless motor, geek-servo, Lucas Oil for lubrication) 1x metal U-joint 4x 1x3 trans-red plates from CADA Finally, I got a short video presenting the model Mass 770g Dimensions 30 x 15.2 x 12.1 cm Scale 1:12.5 GALLERY