Jump to content

Recommended Posts

Posted
2 hours ago, psqidexslizer said:

Evidently, Unibricks posted the wrong set number before. Iron Man buildable figure is 76344 not 76334. A book nook might be back on the table.

76344 is the previously rumoured 18+ set, while 76334 is a 9+ set, so it‘s definitely not a book nook :tongue:

Posted
2 hours ago, Kaijumeister said:

 A large buildable Iron Man figure is truly a welcome addition to the winter lineup :wub: It isn’t at all redundant after getting a bust, helmet, and UCS Hulkbuster.

UCS Hulkbuster 2.0 for $1k to fit the new large buildable Iron Man figure ;)

Posted
7 hours ago, calebcold3 said:

This January 2026 wave really is being carried by the $10 Ghost Rider set. We need to find out what the 4 other sets are so I can know if there will be any sets worth getting. 

Seriously- it's nice of them to make the best set also the cheapest one, I don't know if I'd have bought a $35 spider-car just to get a ghost rider figure.

Assumably they're infinity saga, right? In which case.... I don't have high hopes. It's not going to be thunderbolts sets or anything. I think a Titan Battle is likely, which could be cool. 

5 hours ago, psqidexslizer said:

I’d be surprised if leakers knew at this point which figures are and are not in Doomsday sets. Minifigures are usually among the last details we learn about sets and movie sets are typically kept under wraps better than non-movie sets. Plus, the sets wouldn’t come out until next fall so I can’t see leakers teasing his inclusion this early.

It's almost certain that doomsday sets were in development before that delay to december- it's not out of the question a leaker could have gotten a bit of info out of them back when they were planned for (Likely) an April 2025 release.

That said, I would definitely prefer some comic-based X-men sets than doomsday X-men ones. (Or '97, the designs are essentially the same)

5 hours ago, Kaijumeister said:

A large buildable Iron Man figure is truly a welcome addition to the winter lineup :wub: It isn’t at all redundant after getting a bust, helmet, and UCS Hulkbuster.

Don't forget the buildable figure four years ago. (Honestly if this is a constraction figure I don't really mind- if those actually do sell, it makes sense they'd want one of one of the few characters it actually works for back on shelves. If it is an 18+ statue I'm going to lose it- lego has a problem making and discarding new 18+ sublines).

2 hours ago, Scarilian said:

UCS Hulkbuster 2.0 for $1k to fit the new large buildable Iron Man figure ;)

If they hire Ransom Fern I'd actually be OK with this, but with the current team, given the de-evolution of the design between 2015 and 2023?4? I think it would legitimately just be a rectangular prism with limbs. After all, it's crucial it fits that new buildable iron man.

Posted
17 hours ago, Lego Nostalgia said:

Really hoping for some more Raimi sets, would love an OG Goblin and Black Suit Spidey, also really want a new comic Deadpool since he showed up in the special and will be in Doomsday, he's no longer off limits

Really want Ronin/Hawkeye too

I'd like Bullseye/Kingpin comic version in a spidey set too

But we'll just get more venom,miles,gwen and the same old red and blue spidey

I'm hoping the SM2 subway set will be successful enough for Lego to make at least one set for the first Raimi film and one set for SM3 so each film in the trilogy is represented. If they can keep churning out Endgame sets over and over, I don't think it would be unfeasible to get sets from the Raimi films every so often. They're even getting re-released in theaters (again) in a month, so clearly they still have commercial appeal.

My Target app shows me which Lego sets get purchased the most in the last month and out of the Marvel ones, the subway set is one of the top ranking with 11K bought in the last month. The only Marvel set that beats it is the Spider-Man Mech vs Anti-Venom set which sold 16K in the last month. And that's only a $10 set.

The lack of Ronin to this day is why I feel we're probably only going to see a fraction of the Doomsday/Secret Wars cast in minifigure form if we can't even get one Endgame character more than half a decade later despite regularly getting Endgame sets.

I'd be curious how they'd make Kingpin, like if he'd be a bigfig or a regular figure. After the Thing, I feel they'd make Kingpin a regular minifig too.

I wouldn't mind the repeat of the same heroes and villains if we got more variety with the civilian characters like Peter's friends from the classic comics: Flash Thompson, a non-Goblin Harry, Liz Allan, 616 Gwen Stacy, etc.

7 hours ago, Mandalorianknight said:

That said, I would definitely prefer some comic-based X-men sets than doomsday X-men ones. (Or '97, the designs are essentially the same)

The Marvel Legends leak claims that Cyclops' Doomsday outfit will be his 90s one, which has been heavily speculated since Wolverine & Deadpool. Something tells me even if we get a new Cyclops minifig, he still won't get dual molded legs or even yellow hips.

Posted (edited)
9 hours ago, Mandalorianknight said:

Assumably they're infinity saga, right? In which case.... I don't have high hopes. It's not going to be thunderbolts sets or anything. I think a Titan Battle is likely, which could be cool. 

A Titan Battle set would be neat :sweet: A good candidate for the unknown $100 set!

The Infinity Saga still has so much potential with the Destroyer, Red Skull‘s car, the train chase in CA:TFA, Malekeith‘s ship, Knowwhere, Ego‘s planet, Q-ships, and so on, but nahhhhhh, we definitely need more Endgame final battle and redundant Iron Man sets :snicker:

I think I‘d prefer more Raimi sets right now.

Edited by BrickBob Studpants
Posted
11 hours ago, JeanGreyForever said:

My Target app shows me which Lego sets get purchased the most in the last month and out of the Marvel ones, the subway set is one of the top ranking with 11K bought in the last month. The only Marvel set that beats it is the Spider-Man Mech vs Anti-Venom set which sold 16K in the last month. And that's only a $10 set.

I wouldn't mind the repeat of the same heroes and villains if we got more variety with the civilian characters like Peter's friends from the classic comics: Flash Thompson, a non-Goblin Harry, Liz Allan, 616 Gwen Stacy, etc.

The Marvel Legends leak claims that Cyclops' Doomsday outfit will be his 90s one, which has been heavily speculated since Wolverine & Deadpool. Something tells me even if we get a new Cyclops minifig, he still won't get dual molded legs or even yellow hips.

Unfortunately the mech's $15 (I mean, I think it's a reasonable price for it, but you know what I mean) but yeah the price point definitely helps it and the fact that the next one up is $55 is evidence of how well the subway set's doing.

I wouldn't mind that either.

That's pretty cool- maybe he can come down to affordable secondhand once those release. Still waiting on the x-jet cyclops minifigure to not cost $15-20 on BL.

10 hours ago, BrickBob Studpants said:

A Titan Battle set would be neat :sweet: A good candidate for the unknown $100 set!

The Infinity Saga still has so much potential with the Destroyer, Red Skull‘s car, the train chase in CA:TFA, Malekeith‘s ship, Knowwhere, Ego‘s planet, Q-ships, and so on, but nahhhhhh, we definitely need more Endgame final battle and redundant Iron Man sets :snicker:

I think I‘d prefer more Raimi sets right now.

I hope so- I think @poisonbricks was the one who made a good moc-up of what it could look like. If they can implement some of strange's abilities- a Mirror Dimension effect out of trans-clear, some representation of the bands he uses, etc- I think it could make a really unique display piece- maybe they have some moon chunks on transparent stands as if they're crashing down? (It'll be stock orangeish terrain with a midi-scale sakaaran fighter - it'll be an endgame final battle that still doesn't include ronin.)

To be fair I can see why we don't get some of these- Malekeith's ship isn't likely to be a bestseller, for instance- but the Q-ships stick out to me as anything Infinity war should do pretty solid and they already undersized the sanctuary 2, so it's not like it'd need to be a D2C set. Likewise, Thor vs the destroyer is screaming to be a $10 set.

Raimi sets would be excellent too, the Spider-Man 3 final battle would be a great playset, and- again on $10 sets- just a simple goblin glider and brick wall or something would sell spectacularly.

Posted

Cowboy Spiderman kind of looks nothing like the movie version. tiny Horse, no hair, mask is a bandana mask going down from the hat not a full head mask with a mask on the neck? I'd say wated slot but hopefully we'll get the rest of missing min characters in tie in sets when the third movies finally comes out so it's nice the cmf offers Characters we might otherwise not get.

1 hour ago, psqidexslizer said:

It’s been six weeks since part 1 of the Lego Marvel 2026 set list leak. Part 2 should be dropping any day now. :tongue:

Praying to Selune for Venom Horse.

Posted
1 hour ago, Agent Kallus said:

Cowboy Spiderman kind of looks nothing like the movie version. tiny Horse, no hair, mask is a bandana mask going down from the hat not a full head mask with a mask on the neck? I'd say wated slot but hopefully we'll get the rest of missing min characters in tie in sets when the third movies finally comes out so it's nice the cmf offers Characters we might otherwise not get.

Praying to Selune for Venom Horse.

Honestly half the figures there are wasted slots. It's a good CMF overall but frustrating that it could have been so much better than it was.

Venom Animals battle pack with Venom Horse, Venom Frog, Venom Fish, and Venom Man (Eddie) with 2x troopers and the xenophage. Comes with a wave of Netflix Daredevil, Deadpool and Wolverine, and Marvel Zombies sets.

Posted

On JediJACPenguin's website, we have 7 untitled LEGO Superheroes sets coming in April/June 2026:

They are:

  • 76345 18+
  • 76346 12+
  • 76347 9+
  • 76348 9+
  • 76349 7+
  • 76350 8+
  • 76354 18+

I think the 2 18+ sets will be busts for Marvel, with at least two of these sets being Spider-Man: Brand New Day sets. The other 3 could either be Marvel or DC. 

Source: https://jedijacpenguin.com/everythingweknowaboutLEGO2026.aspx#LEGO_Super_Heroes

Posted
14 hours ago, Agent Kallus said:

Cowboy Spiderman kind of looks nothing like the movie version. tiny Horse, no hair, mask is a bandana mask going down from the hat not a full head mask with a mask on the neck?


 

Do we know if web slingers head is a new print or just the standard spidey mask print? I can’t tell from pics like on brickset.

Posted

I was able to find the Spider-Verse CMFs at my Wal-mart today. I ended up getting six: Gwen, Peter B, Spider-India, Spider-Byte, Spider-Punk, and 2099. I was on the fence about Miles and Cowboy Spidey, but decided against them for the time being - I don't think I like the electric power printing on Miles and Cowboy doesn't really match with the other stuff I have. If I see them on a sale, I might get them. The other four are a pass for me, though.

Posted (edited)

I'm very late on this but I wonder if we will continue to get Marvel street mini-modulars while DC gets the big modulars for a few years. Wasn't it rumored we will get a smaller Baxter Building?

 

Daily Planet is almost a lock for next year and they could do the Hall of Justice after that. 

Edited by doclord
Posted
42 minutes ago, doclord said:

I'm very late on this but I wonder if we will continue to get Marvel street mini-modulars while DC gets the big modulars for a few years. Wasn't it rumored we will get a smaller Baxter Building?

Kevin Feige has confirmed that there will be scenes in Doomsday with the Earth-199999 heroes in the Baxter Building, so I'm hoping for a set to come later in 2026, maybe around the size of the 2020 Avengers Tower.

It's also possible that one of the Brand New Day sets is a building made to be compatible with the rest of the street sets, considering they're already a mix of several different universes.

A playset Daily Bugle seems like the most likely comic-based building though, since the D2C version just retired, and there are plenty of minifigures they could re-use.

1 hour ago, doclord said:

Daily Planet is almost a lock for next year and they could do the Hall of Justice after that. 

I'd hesitate to say that any large-scale DC set is really a lock, especially if it isn't based on Batman.

Posted (edited)
18 hours ago, Lego_ofme said:

Do we know if web slingers head is a new print or just the standard spidey mask print? I can’t tell from pics like on brickset.

It's a less detailed version of the normal Spider-Man mask, with slightly tweaked eyes to fit the bandana piece better (also no back head printing)

 

(Images taken from Just2Good's review)

 

https://photos.fife.usercontent.google.com/pw/AP1GczNLRmdstPFdd59ONLNaPu87IBQ_pzTBOkvwk6BPyfjoWwvk6CkuBJoYbw=w1257-h707-s-no-gm?authuser=0

https://photos.fife.usercontent.google.com/pw/AP1GczPiBchzaIdnZfGBbocDWxRgsfC_8Kmfs1v4Wm9-GkeveaDYf6zhLA7Whg=w1257-h707-s-no-gm?authuser=0

Edited by JediMercenary
inserting images
Posted
On 8/28/2025 at 1:55 PM, CloneCommando99 said:

Doomsaurus Rex or we riot

It would be a very fun choice, though I think if it doesn't show up in doomsday it's pretty unlikely. It's rare for lego to throw us the bone of something actually straight out of the comics build-wise.

6 hours ago, doclord said:

Daily Planet is almost a lock for next year

The only scenario in which I think this is at all likely is if lego thought the superman movie was going to do a lot better than it did, in which case you'd imagine they'd have actually made tie-in sets around the release. I doubt lego stops making marvel modulars out of nowhere, they seem to do pretty well. My guess is 2026 is going to be another marvel modular, and if Arkham does gangbusters, we'll get a comic Batcave or something in 2027.

On 8/27/2025 at 4:27 PM, Mandalorianknight said:

Still waiting on the x-jet cyclops minifigure to not cost $15-20 on BL.

Reverse monkey's paw- Wouldn't you know it, he was part of a lot I got on eBay to part out awhile back and I totally forgot. I'm pretty happy with him- cyclops has always been one of my favorite X-men, which is weird because I haven't really seen all that much content with him in it, and I didn't find either of his movie versions particularly interesting. He's a lot of fun. Took me almost two years to get ahold of him, but he's everything I wanted him to be. He'll be going in a central spot in my collection.

That same lot also included a few other figures I'll be holding on to, namely one of the Amazing Friends spideys and Killian. I'm using Killian's torso for an Iron Fist, and I've been wanting that Amazing Friends spidey head for awhile, the eyes remind me of the 90s Todd Mcfarlene designs.

Posted

Feels just my luck that I find my first box of Spiderverse CMF packs at Sainsbury's and it's empty. When the first Marvel series released, I only found them in a supermarket once, hopefully that's not the same case with this series. NEED that Spider Punk figure

Posted
10 hours ago, NXS7 said:

Feels just my luck that I find my first box of Spiderverse CMF packs at Sainsbury's and it's empty. When the first Marvel series released, I only found them in a supermarket once, hopefully that's not the same case with this series. NEED that Spider Punk figure

I work for Sainsburys and it looks like most stores have only been sent 1 case, stock started coming in on the 26th. (My store hasn’t received any yet but we are down for selling them) 
 

For the F1 series we only received 3 cases over its run but that may just be because they weren’t selling. 

Posted

Does anyone have the alphanumeric codes for the European boxes of Spider-Verse CMFs? It’s actually only the last two digits of the first block of seven numbers that are needed for identification. If you have those, please share in reply to this post or provide a link. Thank you.

Posted
7 minutes ago, AmperZand said:

Does anyone have the alphanumeric codes for the European boxes of Spider-Verse CMFs? It’s actually only the last two digits of the first block of seven numbers that are needed for identification. If you have those, please share in reply to this post or provide a link. Thank you.

Just get the Minifig Scan app. It’s free and all you have to do is scan the QR code on the bottom of the box in the app.

 

Posted

I really like the Christmas AT-AT, I wonder why the Hulkbuster wasn’t revealed at the same time. It’s given me some hope that set might actually be really good 

Posted (edited)
5 hours ago, CloneCommando99 said:

Just get the Minifig Scan app. It’s free and all you have to do is scan the QR code on the bottom of the box in the app.

 

I’ve used the omgbricks app for previous series which I find works well, but I have no way of knowing if it will be up to date with the European Spider-Verse CMF data matrices by the time I find the CMFs in store which could be as soon as tomorrow. The code numbers would ensure that a generic code reader, not a CMF reader-specific app, works in an emergency.

 

UPDATE: Answering my own query, I managed to find the European codes on Reddit: 

 

Edited by AmperZand
Posted
7 hours ago, DaredevilFan said:

I really like the Christmas AT-AT, I wonder why the Hulkbuster wasn’t revealed at the same time. It’s given me some hope that set might actually be really good 

Was thinking the same thing, hopefully it turns out to be real. Should see it soon.

Also, went to the Lego Store today for the new figs. First time using the minifig scanner app and got all 3 I wanted. 

Spider-Man 2099: Got the original fig back when the set came out in 2019 and always felt it was cool but missing something. The CMF one adds so much detail. Took the cape off the CMF one, gave it to the set one, and have set one unmasked now. Best of both worlds. Love it.

Spider-Gwen: If you’d believe it, I am a Marvel fan who was able to not get my hands on a Spider-Gwen fig (or the newer Venom and Spidey figs until yesterday when I picked up the Museum polybag too). I made it a point to not get her until they gave her some pink arm print and non-generically-black legs. Needless to say the CMF fig fulfilled my desired. Really a great fig. Displaying her unmasked because, even though I like the masked head, I wish the hoodie had some pink printing inside it like she has in the comics, movies, etc. Could have dual molded it maybe or done something like that one WildStyle fig from TLM cheap set in wave 1. Love the pink hair as well.

Prowler: Great fig, not much to say other than happy to have another nice Spidey rogue in the collection. Very nice helmet mold and print. Arm print solid too.

Can easily recommend these 3. Got to the Lego Store 10 mins after opening and there were already folks scanning and running through the figs! 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...