Jump to content

gvb2003

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    36

  • Joined

  • Last visited

 Content Type 

Everything posted by gvb2003

  1. gvb2003
    I use standard tracks and it went very well. I think because both axles are driven. I only have struggles to fit this L motor inside a 4 wide room with a better support so it will not jump from the gear. My current construction is very weak
  2. gvb2003
    Thanks, I see that the plate came loose on the picture. I Indeed need to make a technic construction. And what about the L-motor? Can it take this train without breaking or something?
  3. gvb2003
    Two days ago I made a motorized Class 143. The idea came from someone who also made a Pacer and posted it on Eurobricks. With gears I connected the 2 axles to the L-motor. I'm now trying to make the L-motor stable so it will not jump out of it's place. But I was thinking, how much can a L-motor withstand? It really has a though job moving this train. And is there another way to mount this motor?
  4. gvb2003
    Thanks!
  5. gvb2003
    I have been designing the NS/NMBS Beneluxtrein. A service that ran between Amsterdam and Brussels. In my previous post I showed the HLE 25 from NMBS. Here are the final designs of the two coaches and the old designs: ~NEW~ (the one on the far right is from the original Beneluxtrein) ~old~ ~NEW (I4 Coach)~ ~old~ And finally the Plan D after being assembled, the project has officially been launched.
  6. gvb2003
    Can you tell me something about roller bearings on the axles? Also I should get the two coaches first so I have the full train set of 3 cars to do tests.
  7. gvb2003
  8. gvb2003
    So I was designing the the whole NS/NMBS Beneluxtrein, a service that ran from Amsterdam to Brussels. Here is the final HLE 25 Design. The driving cab is already built. I made some fixes with the HLE 25 engine. All bogies are aligned and the cab has a better design. The only big problem is that I don't know if the standard PU or PF is able to pull all these heavy coaches. I noticed my 7939 locomotive had some problems pulling and pushing the coach w/ driving cab alone. If you have ideas to improve the locomotive feel free to tell!
  9. gvb2003
    Thanks @ExeSandbox , I have Flickr but I can't upload them on Eurobricks anymore?
  10. gvb2003
    When I was writing a topic I noticed I couldn't upload pictures anymore. When I choose a file and upload I get an error message to ask for assistance. I messaged an admin but I did not get any response. I also tried to make the images smaller to reduce the size but that also failed. I'd really appreciate it if anyone can help me!
  11. gvb2003
    Hey awesome make! Can you tell the secret behind the front axle? Is that glued to the metal axle?
  12. gvb2003
    Great! Thanks for your help, this looks very nice. I have enough space in the cab for this idea. I was thinking about this, this looks better
  13. gvb2003
    I have started making the HLE 25 from the NMBS for my NS, NMBS Benelux train set. This was a bit of a challenge because of the sloped front. I'm posting this to show you the progress and for feedback. I have the idea that mine looks different than the real thing. 8-wide would be easier to make more details but I decided to stick to 6-wide. The inverted slopes behind the front coupling are attached to the bogie. Also a small detail that is hard to make is the yellow line. Because of the 2 x 1 x 2 slopes I can't make a yellow line. If anyone has some ideas for me or things that I can do to make it look better, feel free to tell me (Also, this engine will be made specially to be fitted with PF)
  14. gvb2003
    Thanks! It was a bit of a challenge since 3177 already is very small.
  15. gvb2003
    I always like to mess around with existing LEGO sets, especially with set 3177 (a.k.a small car). So I discovered a BMW M4 with a trailer made from another BMW M4 cut in half. I used that idea to make this thing:
  16. gvb2003
    Hey I tried to make it but It doesn't comes out the way I like it. Can you maybe send me an assembled one? I tried making the studs better but it still is a mess.
  17. gvb2003
    Oh there are sub-files? I will try that. No I am not able to make a complete model. Very hard, I don't know where are those sub-files are. It is not complete. (I managed to get all files but now I have to assemble it. Not very hard) Why didn't they made it just a solid model this really hurts to assemble How do I mirror something?
  18. gvb2003
    Thanks, but I'm not sure about this:
  19. gvb2003
    Oh so you don't order it? I do think it is very nice anyways. You did a great job!
  20. gvb2003
    Very nice, but Isn't it easy to make errors while ordering them? When I used LDD back in the days I often forgot something from the list.
  21. gvb2003
    So a long time ago I ordered a front part of set 10157 (part 45706pb01) and a split-level train base to make a bi-level version. Today I decided to do something with it. So I discovered Stud.io does not has that part. Even LDD doesn't has it. I'm considering making the back first and then I'll see what I will do with the front later. If you can help me or tell me what I should do, feel free.
  22. gvb2003
    Thanks! I think I'l stick with the current window but thanks! Did you really saw that one in real? I think the only way is to use yellow tape. But maybe I'l leave it the way it is. I will for sure make the NS logo. Looks nice! But looks hard to make something with it. Thanks!
  23. gvb2003
    I was just going to order the parts, the left one looks very nice to use. Thanks for your reply!
  24. gvb2003
    Can you tell me short how you made custom logo's etc.?
  25. gvb2003
    Plan W coach NMBS I4
×
×
  • Create New...