blaz62

25. Trophy Truck Made only from Corvette ZR1 (42093) bricks. Functions:-Hands of god steering -Full suspensions-independet front suspension with positive caster in front axle and solid axle in rear. -Detachable body -You can open car hood

I present to you mine new creation B model of 42093 set and creations for TC18 Contest-Trophy Truck. This car is made only from Corvette ZR1 bricks. It's been a challenge for me to make it full suspensions car without any springs. But i think i did well. Size 30x15x12 I'm also wanted to make a roll of cage but I had no more right parts. Functions: -Hands of god steering -Full suspensions-independet front suspension with positive caster in front axle and solid axle in rear. -Detachable body -You can open car hood I also made instructions: https://rebrickable.com/mocs/MOC-41658/blaz62/42093-c-model-trophy-truck/?inventory=1#comments

I present to you mine new creation. Pneumatic version of Palfinger crane. Model PK 37.002 TEC7. Crane have 2 pneumatic cylinders V2 2x11. Other functions: -Crane rotation -Two boom extension -Two stabilizer -Extension stabilizer supports -Ready to mount on vehicle. -Crane Outreach is 50cm. The stabilizer can be removed. I'm also made instructions: https://rebrickable.com/mocs/MOC-38744/blaz62/pneumatic-crane-palfinger-pk-37002-tec7/?inventory=1#comments

10. Destroyer Its is post apocalyptic version of my Scania XT 8x4 truck. Made from "scratch rusty parts" to survuive in this world.  Functions: -Controlled by SBrikcs -Drive (2x XL motors) -Steering (Servo motor) -Full suspensions -working V12 motor (M motor) -workin cannon with rotations -tow truck arm with wrecking ball Review and video about Scania XT 8x4 kipper mulda truck coming soon.

I present to you mine new creation for Mad Max contest. Its is post apocalyptic version of my Scania XT 8x4 truck. Made from "scratch rusty parts" to survuive in this world. Functions: -Controlled by SBrikcs -Drive (2x XL motors) -Steering (Servo motor) -Full suspensions -working V12 motor (M motor) -workin cannon with rotations -tow truck arm with wrecking ball

I present my new creation mini spider crane. Small model with working functions. Instructions: https://rebrickable.com/mocs/MOC-25491/blaz62/mini-spider-crane/#info More pictures: https://flic.kr/s/aHsmDZxmut

@Yevhen Because I'm make short chassis truck and heavy model crane (similar to the model Palfinger PK92002). Something like that:

Thanks all! @efferman Thanks for the warning. I'm mesure model few weaks ago and I'm obvious confused number. Right scale is 1:15. Wheels are little smaller than orginal model. Measures are (in mm): length 500, width 165, height (cab) 210.

Hello After long time I present my new creation Scania XT truck with Palfinger crane in scale 1:15. I start this project almost 2 years ago. Truck is remote controlled by PS4 controller (2 Sbricks). RC functions: -PF Servo motor-steering, -PF XL Motor- drive, -PF L Motor-Gearbox and middle differential lock/unlock, -PF L Motor- Crane rotacion or middle outrigger leg, -2x PF M Motor-Crane And many other manual functions. Crane lenght 70cm. Modular build. Each segment work independently. Crane and chassis need only batterybox. In cabin are no PF elements. More pics: https://www.flickr.com/photos/136689036@N03/ For now is no building instructions. Sticker are custom made.

In 2011 form this: To this:

Hello everyone Today I will show you my new creation, security camera. This is a little different creation. It is build from 99% Lego bricks. Only non Lego part are phone (Sony Xperia S), camera (Sony HDR AZ-1) and batteries. Camera is powered by 2 M motor, one for rotation and one for tilt. Phone and camera are connected via Wi-Fi. VIDEO:

Amazing design, look like real! Sticker also made detail on new level. Are print on normal print paper?

I will but curently have only 2 pumps. I'm build many version of pumps and I think this is the best. Is not the smallest but is fast. In this verson pump is stationary and only piston move up and down. Crank make from rotation to linear. Now fill 1dcl glass betwen 10 and 20sec.

Hello everyone Today I will show you my new creation, soda maschine. Maschine you can fill up to 3 diffrent drinks. Working system is very simple. High presure from compresor fill bottle and the only way out is hose to glass. Only non-Lego parts are hose and bottle (and soda ).

Thanks! I made tank by myself with empty chocolate box (ferrero rocher). On the top I'm drill hole and gluded bottle cap. For water and air I'm drill two more hole. In one on top is connected pump. This push compresed air into tank. Air push water into another hose which is on the bottom to canon. Canon have maximum range almost 1m. For longer range I should use few more mini technic pump and that will be make higher presure. On this truck I'm use 2. @Richard Dower Yea truck in not the fastest, but in so small scall I couldn't make faster. Water is heavy and if I make faster gear ratio truck wouldn't drive so well. Here are some pictures:

After a long time since I started make water pump for fire truck I finished this project. Water tank in only non-Lego parts (and hode and batteriy ) Truck have 4 PF motors. One XL motor is for driver, servo motor is for steering, L motor is for pump (2 pneumatic pump) and M motor have 2 functions. First is canon rotation and second is winch. Between these two functions you must switched manually. And one under the "hood".

Thanks! Here is full video of model. For contest is been max length 1 min.

Thanks, this means me a lot! @Sylvian Yea i try to make copy of orginal suspensions, but car is to narrow and so I could not insert differential betwen.

Thanks KamalMYafi I try difrent tings but none of them are works.

Hey I present my creation for contest. I made 930 model or 911 turbo in scale 1:12. Model have full suspensions, 4 speed gearbox with lever betwen fornt seats, steering wheel with 2,5 turn radius. Video: Better quality pictures: https://www.flickr.c...157670778825060 I chose orange colur by random and don't have any connection with porshe set. And i don't have this set (this parts i'm buy separatly form bricklink and some are form unimog set).

Wow thanks guys! I didn't, expect so big response. That mean me a lot! This is been hard and long project, I making this almost 2 months, every day. @zblj Yea, but we talk about 30 years in future. Maybe is today fantasy, but then will be reality. I will make instructions, but can't tell when because i'm right now busy with study.

Greetings. I want to introduce you to my vision of the truck of the future, Year 2045, Mercedes Benz Anataros, Blue Energy. ( for ReBrick challenge) It’s all about The Concept of fully electrical vehicle, which uses only a Electrical motor. Truck also fills with energy by using brakes, The solar panels on the roof and by the pressure plates in the shock absorbers. In the under part of the mask behind the iron bars there is a turbine, which uses air to function which is really strong at 75 M/ph. The maximum speed for trucks would raise to 75 M/Ph. Because the trucks would be more safe. The shape of the cabin would be the same with the difference of it being remodeled for aerodynamic. You can see this because the front part of the cabin is no longer flat but it’s bent in the sides. The classic lights are no longer on the roof but are instead spread around the front of the mask. The interior is also remodeled one of the big differences is that the Steering wheels is no longer on the left but it’s now on the middle and there is only enough space for one driver. And also the cabin is no longer just a cabin it’s almost a real home it’s filled with a shower and a toilet and on the other side with a refrigerator and an oven. The bed is also changed since it’s positioned differently. The truck is in a 1:16 benchmark. The benchmarks are from Mb Actros, the last model. Xl drive motor is for drive, servo for steering. Full suspension, drives are made for maximum power. Outside: -Aerodynamic cabin. -Lights spread in front of the entire mask. (1 pcs pf light) -Solar panels on the top of the cabin. -Behind the cabin on one side it’s a battery and the other side it’s a water tank. -The motor is on the bottom of the cabin. The cabin can be raised. Interior: -Space for only 1 person -The truck does not have meters he has to write them on the glass (screen) -The truck has an autopilot function. -The chair can be moved to the left so he can pull out the bed. Video: High quality pictures: https://www.flickr.c...157657141139143

Thanks all, mean me a lot! I kwon, but I didn't have time to make it. I'm barely finish model and take picture. I have filmed and must only merge tapes. I will added video soon.

16:10 10:6 11:4 14:3 17:2 9:1

21. Excavatorux (Enforcers) Discussion link Normal mode: -Excavator with working front and rear bucket (7 mini LA+1 Worm gear) Battle mode: -Separate in 2 parts. First is big stacionar defense point and secon is fast hunting machine with gun. -Cabin can be lift up. -Cannon shot bullet. Both part are still togeder, cab is lifted Separate Tracked machine gun, for hunting bandits. Battle defense mode