BondemandClausen

I have been in contact with Lénárd, from Sbrick, and he has now fixed the problem. I can now access Social.Brick, Designer, and the profiles is now available in the app again.

I have a notion that Sbrick has closed down now. I have tried to open Social.Sbrick.com, and it took 10 minutes before it loaded, after several atempts. I then managed to sign in, worked well. but right now im trying to enter designer.sbrick.com, but have failed so far. I can also not download any new profiles to the Sbrick App on my Ipad, either private or public. I have contacted Lénárd Pasztor to hear if its right that they have shut it down. All I can recommend, is to hold on to old phones and tablets with the app installed, cause you cannot download the app anymore. and it seems like you can only run the profiles you already have downloaded. As I see it the only other oprion is using Brickcontroller 2 for future MOCs with Sbrick installed. That can also be a bit tricky, cause the developer has also lost interest in his app, but others are making improvements. search posts here at Eutobricks about the issue. So the Sbricks are not necessarily useless. I have combined them with Buwizz 2.0 in three Tractor Mocs, where the Buwizz supplies the Sbrick with power, and that then gives 8 channels to work with, ind little space. For me personally it is also sad that the era seems to be over, being with Sbrick from the start at the Kickstarter Campaign 13 years ago. I was so fortunate to get three prototypes of the Sbricks, for a very Special MOC, that i still have running this day, and the guys from Sbrick developed a profile for it, long before the Designer program was launched. So the Sbrick has always had a special place in my heart, still have.

@vicocz I can understand that you now are the one who makes updates on Brickcontroller 2, correct? I have now three Buwizz 2.0 that cannot be found when i scan for new devices. Is that on purpose? I'm quite depending on the BC2 for my MOCs, that runs Buwizz and Sbricks at exhibitions. next event is here wednesday the 2. july, and 4 days from then. Is ot possible to get the problem solved before then? Latest update of BC2 on my phones are from the 13. june 2024 in Google appstore, and there are not any newer updates available Best Regards FarmerClausen

Great work! And very brickish 😅. Been a long time since I checked in here, so I see that I have been missing out some important stuff. 😅 I see a lot of ideas I came up with my self 9 years ago when the Ropa EuroTiger 4 V8 XL came to life.😉 https://www.eurobricks.com/forum/index.php?/forums/topic/81575-moc-ropa-eurotiger-8v-4-xl-sugarbeet-harvester/&tab=comments#comment-1568966😉 Will be exciting to see it finished, and I hope you will make it untill your deadline. Further more I'm curious to se it in function, especially driving, with the less powerfull new XL motors, than the old PF XL motors. I know what it takes to make it move. Keep it up!

Thank you Google Translate.. now i understand much more 😉 No there are no instructions for my models at all. I have made up my mind a long time ago, not to do any. Two major reasons. 1. Limited time. The vast sparetime i have when not running my farm, I rather use for new MOCs, instead of making instructions. 2. I would be very sad and annoyed if my models would suddenly appear on unspeakable chinese counterfeit internet pages. So I prefer having them unique this way. 😉

Thanks. I will try and post some more in the future 🙂

Thank You. No there are not any instructions available.

Thats correct, or for fertilizer, or Bio products for organic crop production. I havent made a proper video yet, and its also because of the software issue i mentioned. it will come as soon as that is solved. And regarding the bending I agree.. but thats the best i could manage for now, Reinforced the links and joints as much as possible because thats where the bending appears. Its taken to the limit, but as so many times before gravity is a bitch when it comes to this

Ohh thanks a lot.. an honor

I here by present to you the Amazone UX 11201 Trailer Sprayer. I was finished last summer with it, but haven't had time to present it here yet. It's in scale 1:16, so it fits my tractors. The spray boom is over 2 meter wide unfolded, IRL 36 meter. The tank contains 11.200 liters IRL, but here it contains a battery box, a Sbrick, a Sbrick Plus, 2 L motors, and a servo. On the Spray boom there are 2 L motors, and 2 M motors to fold and unfold the boom. The servo tilts the boom, so that the boom follows the contour of the ground/ crop it sprays. For that, there is also two Distance sensors fitted on each side of the boom, connected to the Sbrick Plus. The Software is not quite programmed yet, but i hope with some help from my good friend Martin Nygaard Schacht, we will manage to do a program in the upcoming Sbrick Pro. It also has steering axles, that follows the angle with the tractor, and there by follows the track of the tractor. The idea is lend from Lorens Christian Meyer, and modded for this purpose. It has a light system, with 72 pico LEDs on the spray boom, one for each nozzle. See more pics : ttps://bricksafe.com/pages/Flidsager/amazone-ux-11201-sprayer- I hope you enjoy Farmer Clausens Agritechnic

Search for Lorens Christian Meyers BIG BUD on FB, https://www.facebook.com/groups/584147958600699/permalink/1215711515444337 He has a solution for the big tires.

I did see the rims you used on your Xerion. I just use the Power Puller rims for this Tractor. But with a rubber gasket for plumbing pipes, that fits on regular rims 56 x 34 mm, you can fit the tires on those rims. But the rims 62,3 X 43 mm from the Porsche/Bugatti/ Lamborghini fits even better, but the designs and colors might not fit as well ;-) This is the rim i use on the New Holland. https://bricksafe.com/files/Flidsager/new-holland-t7.315-hd-blue-power-tractor/tires/IMG_20210305_111841.jpg/640x479.jpg The Rubber gasket fits in the gap on the rims. https://bricksafe.com/files/Flidsager/new-holland-t7.315-hd-blue-power-tractor/tires/IMG_20210305_111807.jpg/640x479.jpg Allthough the rims aren't that wide, its manageable to get the tires to fit on with the gaskets.

Thanks a lot. :-) well its not a lock, It's just to turn the PTO on and off, and thats done manually. I might change it though, so that the PTO gets it own motor.. but space is limited.. These tires are great for 1:16 builds. Regarding Tires I had hoped that the next tractor tires had been in a size so that they could have been used as frontwheels with the Claas tires, but the new tires on the Jeep, is just way too small... Thanks again

Allthough it has been a while since i finished this model, i thought i would share it with you guys. The reason is that i finally got time to make a video of it. Its my second Tractor, based on my previous New Holland T8 Tractor from 2014. I hope you will enjoy the video. The New Holland T7.315, next to his Big Brother New Holland T8.435 Farmer Clausen AgriTechnic

If you place the turning point of the valve so that it is aligned with the servo axle, and use an Sbrick as controller. you can adjust the turning of the servo in the Profile designer to approximately 40 degrees, instead of 90 degrees, so that you avoid to overload the servo.