0RBlT

Model is simply super. Only uphold the opinion guys who say that arches over the wheels do not quite look beautiful, they are very rude and because of this they do not give fine lines. Can advise you, try to leave everything as is only to give volume http://www.bricklink.com/catalogItem.asp?P=62462 do not use, and try to replace them with a bunch http://www.bricklink.com/catalogItem.asp?P=4265c I think that they will give a smoother bend.

I wonder how much the model will weigh in the final assembly? And how you'll transport it all? Yes, I've seen a couple really huge in size but karabli 250,000 parts it's just crazy!

Work is nearing completion. Looking forward to the final result.

You did a great job, and now you have reached a very close result to reality. Thank you for sharing your ideas with us, so that we can learn from chemuto you. Most of all I liked the idea of ​​how you could implement to achieve Custer, it is very realistic and believable! You added , аnd with its help you there was a place for the suspension, it is a very compact.

As for the proper control of the car that's described below Camber - is the angle between the plane in which the wheel rotates and the vertical. Negative value - internal focus upper side wheels. Positive value - external focus. If you change the car roll camber changes. A negative value is bad for the stability of the car when cornering. The right to be considered a value of zero camber, which contributes to less wear on tires. Kaster ( castor ) - the angle between the vertical and the projection axis of rotation of the wheel to the longitudinal plane of the vehicle. Responsible for self-regulation of steering wheels due to the speed of movement. In some cases, changing the factory default leads to a more stable straight-ahead position . Convergence - the angle between the plane in which the wheel rotates and the direction of movement of the car , in other words - the difference of the distances between the rear and front edges of the wheels. Has the most significant impact on service life of tires. Persuaded to check toe-out as possible by special diagnostic procedures , and independently : worsened control over handling car ; excessive noise from the tires during fast driving ; when driving on a flat straight car noticeably moves away , etc. As for my question, I would like to understand what you are trying to implement this in LEGO? I can see how you go step by step to this realization, but what can be seen in your pictures do not correspond to reality, the reality must be the collapse, and you also get the opposite wheels collapsing. Although I could be wrong, because the picture is not all clearly visible, perhaps a distortion of reality!

Hello! Tell me please, I watch as you incrementally construct Front Axle car, and all I can not understand what you are trying to achieve? Realistic convergence collapse? Here's how a little bit can be seen in this picture! http://www.google.com.ua/imgres?start=465&sa=X&espvd=210&es_sm=93&biw=1366&bih=620&tbm=isch&tbnid=EErkX624RJ8cMM%3A&imgrefurl=http%3A%2F%2Fvipavto.com.ua%2Findex.php%3Fpage%3Dorder%26id%3D362&docid=xHH39PtjG8vSLM&imgurl=http%3A%2F%2Fvipavto.com.ua%2Fimages%2Fphoto%2Fmercedes-benz_s550_221_amg_1.jpg&w=640&h=426&ei=CI4RU6jHAYzs4wSX74GgDA&zoom=1&ved=0CPkBEIQcMFA4kAM&iact=rc&dur=1063&page=25&ndsp=20

Hello! Frankly I downloaded once and watched your theme! But I can not say, because I do not understand why do we need this mechanism! Differential, sliding bridge, drive it, I understand why you would need a car model, but where and how to apply your design I can not imagine! Maybe I do not understand, and if I'm wrong then please give me an answer that I could understand and maybe then I could say something (comment) or advise!

I can not respond to all 100% confident because I have not created syuchego miracle! But what I saw in the pictures that posted this wizard, it seemed to me that he uses similar potderzhaniya stops for a boom! Although I could be wrong! Here is a link to where the image is clearly visible about stops that I had in mind! http://postimg.org/image/2jyx7fktg/

Hello! And I honestly delighted with your Lego Ford Fiesta WRC, I especially liked the idea of ​​implementing the front suspension, very cool! About your box, please tell me if you connect the CL motor, it does not tear this box? And because it will not knock out power transmission?

I think I just beginning to understand that as a yes. But I did not converge with the function of channels PF! If you have a transmission with low and high gear ratio, why waste one channel in separate motors for acceleration? And you have a very difficult box for vsegolish two speeds! Wanted to say thanks on this forum people are more hospitable and open, willing to help and share their ideas. It is very nice!

Just amazing! How many parts used to build this model? Dimensions are huge, and surprisingly all this tractor is very powerful!

Hello! Tell me please, what is the big item on the left? From what she set? In advance thank you!

Hello! Tell me please, I'm in a series Technic beginner and do not quite understand how you manage remotely pneumatics? Using servo motors? On this model you used all available channels 8 PF or there is what is the secret?

Hello! When I looked at your video I was immediately reminded of the famous movie about drifters, especially when you are trying to drift around chelovechika Lego! Lovolno small model you get, but very compact and realistic! I especially liked the idea voplascheniya front suspension, homemade but very effective, very cool thank you thank you for the idea!

Hello! And I can give my opinion! 42009 - Spare 10/10, Display 10/10 8275 - Spare 10/10, Display 10/10 8455 - Spare 10/10, Display 9/10 8043 - Spare 9/10, Display 9/10 8421 - Spare 8/10, Display 8/10 8439 - Spare 6/10, Display 9/10

You are a very big fellow! This is a really good job and you have invested a lot of work to create this model! Your MOC I like than the standard set. It looks more complete!

Hello! Please tell me who knows where or who can find the installation instructions A Porsche 911 Turbo by Spiderbrick! I saw this model as me she loved it! All forms of the ideal, a very good home-made! In advance thanks for the answer!

Hello! I apologize for the terrible english , because I did not know very well and writing through an interpreter ! This is the biggest MOC I've ever seen , and it just impressed me , a low bow for such work! And 6000 parts just impressive amount of detail ! C your permission, I will ask you a few questions! 1. What is the gross weight of this model ? 2 . Outriggers raised this model from the floor ? When expose legs at the tap . load and effort outriggers they do not bend ? Do deformation ? 3 . I understand the boom in 4 sections which are put forward by the system is the same as model 42009 , or any parts of the nominated independently ? ? ? What is the total height by luffing Maxima ? 4 . I have long puzzled and still can not understand how you have ensured that the transmission shifts remotely and you have to 4reh engine 12 functions ? What is the box schematic ? In the picture you posted . cover all engines and nothing can not be parsed . Based on that box as in the 8043 model , and I understand that but I realize that I've come up with , you broke my head and understand it well, I can not ! You've got me very puzzled ! 5 . How do you solve the problem of lifting a heavy and huge boom ? I saw the idea that you have submitted , but it is just awesome ! 6. Just surprised and impressed me with the idea about the different degrees of rotation of the wheel axles ! You on this occasion took the photo ! But in the description I just confused about the description of the two functions , and therefore almost understandable scheme !

Judging by your picture, I think it's the same 8275 but only thinner! And identical functions as its predecessor! If so it would be better to sue the good old 8275 have in this collection than a goner!

Honestly I can not understand why about this set do not have any information? Is this set so much that it is worthless do not want us to highlight? A small piece of this set is not a video does not count: (