Jockos Posted May 1 Posted May 1 The first set came to my mind seeing this is 17101, maybe because of its head. Quote
Auroralampinen Posted May 1 Posted May 1 Well, amazing. This set apparently brings back these pieces:). https://www.brickowl.com/fi/catalog/lego-ev3-track-rubber-elements-set-5003246 Quote
Timewhatistime Posted May 1 Posted May 1 (edited) If this is the design of a lunar outpost, I prefer staying on earth. Edited May 1 by Timewhatistime Quote
Jundis Posted May 1 Posted May 1 Not gonna buy it, but kinda like it. There is a very clever solution on the arm, where the small turntable is held by the black 87408 connector to engage the 12T gear. Quote
Aurorasaurus Posted May 1 Posted May 1 6L perpendicular link in the back, hopefully its a cheap set and those links can become more widely available. It looks like it will have linked pendular suspension. Quote
Maaboo the Witch Posted May 1 Posted May 1 White track links are cool, but this set... eww, no. Think we have the worst of 2025 right here. Quote
Timewhatistime Posted May 1 Posted May 1 2 hours ago, Jundis said: Not gonna buy it, but kinda like it. There is a very clever solution on the arm, where the small turntable is held by the black 87408 connector to engage the 12T gear. This connection is quite creative and new. In principle, I like it. However, the crane's load will rest on just two half beams (i.e. the black 87408 connector). Moreover, the second stage of the boom is held in place by a single 4L axle with stop (going through the connector). Considering the massive first stage of the boom, this solution seems to be odd and lacking stability. Quote
msk6003 Posted May 1 Posted May 1 (edited) New parts Big 6 spook, small 24 spook 7L diameter wheel cover in White 88323 link tread wide in White 14149 Rubber foot for link tread in Blue 14696 Technic chain in White 80278 & 80274 Panel 5x4 left and right in Blue Rare parts Seems like nothing Edited May 1 by msk6003 Quote
Auroralampinen Posted May 1 Posted May 1 Well, i have now discovered, that the 42211 set, little side crabble build, might be a little easter egg, to the 8275 set b model:). Quote
howitzer Posted May 1 Posted May 1 9 hours ago, Paul B Technic said: Yuck, the colour vomit is strong with this one :( At least there is an aesthetic purpose on it and it's not just to make the construction easier nor because there are no alternative colours available. As an aesthetic choice it's a matter of opinion if you like it or not. Quote
Timewhatistime Posted May 1 Posted May 1 (edited) Does anyone have a clue about the two white liftarms providing the little grabber vehicle's base? The standard 3x5 L-shaped liftarm doesn't seem to do the job, does it? Speaking of this grabber vehicle: It looks like a fun mechanism and can even be tilted (by the well-known combination worm gear + 8 t gear). Edited May 1 by Timewhatistime Quote
msk6003 Posted May 1 Posted May 1 (edited) 8 minutes ago, Timewhatistime said: Does anyone have a clue about the two white liftarms providing the little grabber vehicle's base? The standard 3x5 L-shaped liftarm doesn't seem to do the job, does it? Speaking of this grabber vehicle: It looks like a fun mechanism and can even be tiltes (by the well-known combination worm gear + 8 t gear). 2 60484 3x3 white T shaped beam with extra parts Edited May 1 by msk6003 Quote
Timewhatistime Posted May 1 Posted May 1 (edited) 4 hours ago, msk6003 said: 2 60484 3x3 white T shaped beam with extra parts You are right, there are white 3x3 T-shaped beams - attached to some black beams (visible in the view directly from the top). The "extra parts": There are two 3L lbg beams at the front axle (at the same width as the white 3x3 beams). I'm not sure whether white and lbg beams are connected by black 5L beams on each side... there has to be some space for the two black 4L thin beams which hold (and tilt) the grabber. Edited May 1 by Timewhatistime Quote
heyitsdisty Posted May 1 Posted May 1 What an odd set. It kinda feels like a Mindstorms or educational model that they repurposed at the last minute? I kinda like it cuz I like jank, but I can't deny it's pretty ugly. Quote
2GodBDGlory Posted May 1 Posted May 1 Very strange and underwhelming... I hope we've got the new angled connector in LBG in the suspension of that little cart thing, but likely it's not that one. Quote
Timorzelorzworz Posted May 1 Posted May 1 12 hours ago, Timewhatistime said: If this is the design of a lunar outpost, I prefer staying on earth. It is only in use on the dark side of the moon that nobody needs to see the uglyness. Quote
Stereo Posted May 1 Posted May 1 Should be a rust axle-pin-pin piece at the back of the white quarter ellipse (what other axle piece that's either 3 or 7 long and red would there be), so it goes through the white T into another pinhole behind that. The thin black 4 liftarms going to the top leave a half-plate gap between them and the gear in the middle, my guess would be there are 5L thin black beams in that space (with a red bush between the front end of them). And half of a pin on the the rust axle-pin visible cause I can't think of any parts that would fill that space (would need a 2L both pinholes thin liftarm) Quote
Auroralampinen Posted May 2 Posted May 2 Here is partial parts list:). https://www.lego.com/en-us/service/replacement-parts/missing/42211/pieces?search=* Quote
Auroralampinen Posted May 5 Posted May 5 On 5/2/2025 at 9:09 AM, Auroralampinen said: Here is partial parts list:). https://www.lego.com/en-us/service/replacement-parts/missing/42211/pieces?search=* Well, cool this set comes with those large sprocket wheels. So this is a pretty good parts pack:). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.