SNIPE Posted June 1 Posted June 1 (edited) 8 hours ago, NV Lego technic said: A pin with 2 pinholes would be great too. I assume you mean a #2 connector but with pinholes rather than axle holes. If so the this acts as 2 of them :) Edited June 1 by SNIPE Quote
gyenesvi Posted June 1 Author Posted June 1 15 hours ago, SNIPE said: Another part I would like would be a 7 x 9 frame, because sometimes the 7x11 is a bit too long to fit in a model. Indeed, this would be useful, and also some other sizes. 11 hours ago, NV Lego technic said: A pin with 2 pinholes would be great too. There are many ways to imagine this, so not sure what you mean. Quote
Ngoc Nguyen Posted June 1 Posted June 1 Since TLG has started crossbreeding the angled connectors with other type of parts, I would like to see angled liftarms. Like this but with 3 pin holes. Quote
NV Lego technic Posted June 1 Posted June 1 (edited) 1 hour ago, Ngoc Nguyen said: Since TLG has started crossbreeding the angled connectors with other type of parts, I would like to see angled liftarms. Like this but with 3 pin holes. That but with a straight pin instead of the bar. Edited June 1 by NV Lego technic Quote
Saberwing40k Posted June 3 Posted June 3 On 5/31/2025 at 11:32 PM, NV Lego technic said: A pin with 2 pinholes would be great too. So, like the existing pin with pinhole connector, but with 2 pinholes instead of one? Or, same part but described in another way, a 2L beam with a pin on one end? Quote
msk6003 Posted June 4 Posted June 4 On 6/1/2025 at 1:32 PM, NV Lego technic said: A pin with 2 pinholes would be great too. This is what I understand. Mix of this two parts. Left one but 1L pin insted of axle hole. Quote
NV Lego technic Posted June 4 Posted June 4 Linda, but not really. They would be stacked on top of each other. Quote
SNIPE Posted June 11 Posted June 11 I would like a 1L diameter shock, but instead of being 6.5L, it can be built mostly from other lego pieces and has a lot of customization. I tried making a mock-up drawing by having basically an oval pinhole , like on this piece, and using a stud pin to hold the plunger inside of the body, but since I want the body to be 1x1 in diameter, the other parts would be too big. Also since the plunger is just an axle, but has a pinhole on the end, it would be too big where the pinhole is in order to be inserted into the body. which just has a friction-less axle-hole... We have the 5L axle joiner which has no friction on one end, we have just the metal springs on their own, as well as the 6.5L shock absorber body We have axles with stops in different lengths, connector pins, other connectors but what we don't have, is a way to lock the axles so that they doesn't fall out, but also lock the pinhole on the end of the plunger axle so that also doesn't fall off. So, we need a way to do that, while also allowing for a customizable shock absorber (because that's the LEGO way) IDK if anyone can come up with some designs. a mini pin and bar hole could work, in order to keep the plunger and body locked together, but its not as flexible as a pinhole, whicha ccepts studs, pins, axles, also mini pins are weaker. Quote
Jundis Posted June 12 Posted June 12 4 hours ago, Auroralampinen said: new wheel rims Actually really strange... the 42210 introduced wheel covers again, so wouldn't it be way easier to use the normal 30.4 mm wheel and just put a cover inside? There is plenty of room for both the rim spokes and the 3-star nut...? Quote
Auroralampinen Posted June 12 Posted June 12 (edited) 23 minutes ago, Jundis said: Actually really strange... the 42210 introduced wheel covers again, so wouldn't it be way easier to use the normal 30.4 mm wheel and just put a cover inside? There is plenty of room for both the rim spokes and the 3-star nut...? Well i see on the pictures, that the new rim designs spokes are apparently half stud thick, that the molded bolt design makes the axle hole 1 stud deep. Othervice it would be only half stud. Maybe this interesting solution and design, was neseccary to make the steering work perfectly. Like with the 5 spoke design on the mustang:). Edited June 12 by Auroralampinen Fixed typing Quote
Auroralampinen Posted June 23 Posted June 23 (edited) In case you need white and orange wheel hubs. The new nike dunk set has got you covered:). Edited June 23 by Auroralampinen Quote
2GodBDGlory Posted June 23 Posted June 23 On 6/12/2025 at 9:08 AM, Auroralampinen said: The new ac cobra has brand new wheel rims:). Huh, cool! 1 hour ago, Auroralampinen said: In case you need white and orange wheel hubs. The new nike dunk set has got you covered:). YESS! I have so many MOCs sitting around just waiting for these colors to be released! /s Quote
gyenesvi Posted June 23 Author Posted June 23 7 hours ago, Auroralampinen said: In case you need white and orange wheel hubs. The new nike dunk set has got you covered:). Can you please post these recent sets in the General parts thread instead of here, as they don't have much to do with all the parts listed in this thread, neither do they list parts that we'd wish for. Thanks! Quote
NV Lego technic Posted June 24 Posted June 24 16 hours ago, 2GodBDGlory said: YESS! I have so many MOCs sitting around just waiting for these colors to be released Was that sarcasm or...? Quote
howitzer Posted June 24 Posted June 24 3 hours ago, NV Lego technic said: Was that sarcasm or...? Yes it was, as indicated by the /s in the end of the line. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.