Milan Posted February 15, 2015 Posted February 15, 2015 (edited) 25. Liebherr LR 634 Functions: XL Motor for left track XL Motor for right track 2 M Motors for raising/lowering the arm M Motor for operating bucket Manual functions: 2 LA's operating Ripper Openable doors, tool boxes and engine tower panels Adjustable seat in the cabin Adjustable suspension-lowering/rising at the front 2 positions Features: Pendular suspension via self balancing equalizer bar. Small turntables used as as indestructible bearings for tracks ans drive sprocket wheels Support rod that keeps tracks parallel to each other no matter the weight aplied Front sprockets tensioners VIDEO: Main topic Edited February 15, 2015 by Milan
Jeroen Ottens Posted February 15, 2015 Posted February 15, 2015 26. Alfa Romeo 4C Spider Functions: Fully remote controlled 1M motor for gear selection (sequential gearbox) 1L motor for drive (and fake V4 engine) 1L motor for the seats 1 servo motor for steering The gear selector changes gears on both the gear box for driving (1st to 4th gear) and for the seat operation (left/right, forward/backward, tilt seat rest) Other noteworthy features: Independent suspension on all wheels (McPherson at the back, double wishbone at the front) High rev V4 fake engine, driven by the L-motor Openable bonnet, rear bonnet, doors (the doors lock into place when closed) Fake diskbrakes on all wheels Pictures: Video: Discussion topic: http://www.eurobrick...howtopic=103996 LDD file: http://www.bricksafe...///AR4C_v17.lxf
TeClem8 Posted February 15, 2015 Posted February 15, 2015 (edited) 27. MAN Transport Truck My model have 4 powered motors. I use a gearbox, so i have 7 functions motorised. Primary functions: Selection of operating mode [Driving - Manual - Handling] (M-motor) -Driving : Steering (M-motor) Driving (XL-motor) Outrigger (M-motor) -Handling: Open arm (M-motor) UP arm (XL-motor) Rotate arm (M-motor) Secondary functions: Hog-steering Independent suspension Cab tilt V6 fake engine Openable doors Openable dropside Telescopic section Accessories: Realistic palet forks Gravity gripper Trailer (fully suspended, openable dropside ...) Video: Pictures: Thanks legolijntje for HD render Discussion topic: http://www.eurobrick...howtopic=104085 Edited February 15, 2015 by TeClem8
TheItalianBrick Posted February 15, 2015 Posted February 15, 2015 (edited) 28. Hyster 32-12 Heavy Forklift Discussion topic: http://www.eurobrick...pic=103878&st=0 Sbrick/2 IR Functions: 2x XL motors for driving 1x M motor for steering 2x L motors for tilting the mast 2x L motors for lifting the forks Other functions/features: Led lights Rear steered pendular axle Openable cabin doors (and lockable) Folding cabin (for fake oil pump inspection) Openable side engine covers (for engine check and battery access) Openable top grid (for switching lights on/off) Extendable forks (manual) Fake 6 inline cylinders engine Working steering wheel in the cabin Video: Edited February 15, 2015 by TheItalianBrick
PKW Posted February 15, 2015 Posted February 15, 2015 (edited) 29. Motorstorm Pacific Rift Truck - Molotov Baikal FUNCTIONS 1) steering 2)driving 3)shifting gear 4)boost POWER FUNCTIONS/ ELECTRONICS 1 M motor 1 L motor 1 Buggy motor 1 Servo motor 1 Rechargeable battery box 1 Old 9V motor 1 PF switch 2 IR receiver 5 PF extension wire INFO AWD drive with 2 differential 2 speed gearbox: 2,3:1-1,4:1 front and rear live axles 2 shocks absorbers each wheel FRONT light and medium 9M shocks REAR light 6,5M shocks weight: 1,5 kg (approx) wide: 15M length: 54M tall: 27M PHOTOS OF THE "REAL" TRUCK PHOTOS OF MY TRUCK (with an sbrick placeholder instead of 2 IR receivers in the first two images, detailed photos on the link at the bottom of the post) VIDEO SHORT SUMMARY WEAKNESSES -slow acceleration and low torque -high steering range -aesthetics breaks when it crashes -boost don't explode if overloaded :( STRENGTHS -slow acceleration, low torque and high steering range make its features similar to the ones of trucks in the game -probably an AAA battery box can increase torque/speed -easily removable bodywork -really funny to drive on smooth surface like wood flooring -robust chassis that could be used as a platform for other trucks -it crashes like in Motorstorm :3 (more or less) MORE PHOTOS WIP PHOTOS DISCUSSION TOPIC Edited February 15, 2015 by PKW
Berghain89 Posted February 15, 2015 Posted February 15, 2015 30. Zis E134 Trial Truck This is my contribution to the Contest! Its a Zis E134 Trial Truck. Yes a Trial Truck ;) Nothing special you think? Let me change your mind! Its full with Power Function Motors. Facts: Function 1 and 2: 2 or 4 XL Motors for driving ( via a switch controlled by a M-Motor you can either select 2 XL or 4 XL Motor for propulsion. Function 3: 2 L Motors for Steering Function 4: A Gearbox with 2 Gears. Low and High Gear selected via a M-Motor. One for the crawling and one for flat surfaces. Other functions: Hood and trunk can be opened Working Fake-Engine under the Hood. 2 LED on top and 1 LED in the back. Everything is controlled via the S-Brick App. (I am glad i got the Beta version working since the App is very buggy at the Moment and unpredictable. :( But the Teams is working on that. Here are some Pictures. and at the End a Video. Regarding the Video please keep in Mind that i used a old Digicam for the parts in which i couldn't use my Iphone 6, because i can't use the SBRICK APP and the Camera at the same time :( . But you get the Idea and i hope you like the Design and the Power of that Truck. VIDEO
Fissl Posted February 15, 2015 Posted February 15, 2015 (edited) 31. Mech Mini TOPIC Functions: drive and steer move arms open/close claw boxing arm turning eye rising antenna Power Functions: 2 IR receiver 1 AAA battery box 2 L motors for the tracks 1 M motor for arm movement and operating the gearbox 1 M motor for the claw / boxing arm Video: Edited February 15, 2015 by Fissl
MikeTwo9398 Posted February 15, 2015 Posted February 15, 2015 32. The Wiggle Truck It's my first MOC using studless (technic) Lego. I always wanted to create a vehicle whose control is based on the tilt of the vehicle. Functions: The "Wiggle Truck" is equipped with 5 motors connected to a SBrick. 1 Servo steering (tilting the main body) 2 XL motors for propulsion 1L engine for lifting 1L motor for rotating The 2 XL motors are connected to 1 output of the SBrick and works perfect. Link to the topic: http://www.eurobrick...howtopic=105794 The video Pictures Wiggetruck 01 by miketwo9398, on Flickr Wiggetruck 02 Inside by miketwo9398, on Flickr Wiggetruck 03 Steering neutral by miketwo9398, on Flickr Wiggetruck 04 Steering by miketwo9398, on Flickr Wiggetruck 05 lifted open door by miketwo9398, on Flickr Wiggetruck 06 lifted by miketwo9398, on Flickr Thanks @ JIM: can you change / add [TC6] to the topic, it is my first entry with pictures and video etc. and all wend wrong the first time. And after the entry I found out that I forgot the [TC6].
Appie Posted February 15, 2015 Posted February 15, 2015 33. Wall-E RC Functions: - 2 L motors for the tracks to drive and steer - 2 M motors to move the arms individually - Combined the same 2 M motors, through a differential gearbox, lift Wall-E which result in tilting his head and folding his tracks Manual functions: - Poseable hands Images: Video: Discussion topic
mdbz Posted February 15, 2015 Posted February 15, 2015 34. Whirligig Functions: 1. Rotating superstructure. (L motor, speed control with train remote a) 2. Main arm rising/lowering (XL motor - standart remote a) 3. Secondary arm moving ( L motor, - standart remote b) 4. Basket rotating (M motor - speed control with train remote b) Video Topic http://www.eurobrick...opic=105527&hl=
Epic Technic Posted February 15, 2015 Posted February 15, 2015 (edited) 35. Radical RXC V8 RC functions: Drive- 1 Servo motor is connected to the IR receiver to turn on and off the AAA battery box. The battery box powers 4 L motors. Steering- 1 Servo motor is used to steer the front wheels. Adjustable Pneumatic Front Suspension- 1 M motor is used to power the mini pump and to switch the direction of the switch. The suspension can be raised mechanically and lowered by gravity. Gearbox Selector- 1 XL motor is used to control the 2 speed + neutral + reverse gearbox. It is a sequential gearbox. Features/functions: - Double Wishbone longitudinal push-rod suspension on all wheels. - Opening Gullwing doors - Realistic model Flat-plane crankshaft V8 engine (not the weird LEGO configuration.) - Complete red and black bodywork - No interior due to battery box, wires, and receivers The Video: Pictures: Please vote for me! Edited February 16, 2015 by Epic Technic
Zerobricks Posted February 15, 2015 Posted February 15, 2015 (edited) 36. Compact Motorized Forklift This a very efficient, lightweight yet powerfull forklift. All functions are motorized with 4 medium motors. Features: - Front wheel drive with differential - Pendular rear axle with ackermann steering geometry - Lifting mechanism with double chains for max lift force of over 500 grams (it can lift more than its own weight) - Fork tilting mechanism Video: Topic: http://www.eurobrick...howtopic=105902 Edited February 16, 2015 by Zblj
Nazgarot Posted February 15, 2015 Posted February 15, 2015 37. LINDE INSPIRED FORKLIFT - 3 TON RC PF functions: - Drive by XL motor. - Steering by Servo - Mast tilt by M motor. - Fork lift by L motor. Manual functions: - Interchangeable carriages for equipment. - One Carriage with Adjustable interchangeable forks and towing hook. - Rear towing hook. - Removable LPG bottle. - Opening rear panels to allow access to remove counter weight (battery box). Fits both standard and LiPo/AAA box battery box. - Opening seat compartment to access technical functions (switch and PF recievers/Sbrick). Just like a real forklift where this gives access to motor or batteries. - Opening "hood" to switch battery box on/off Other functions: - Steering wheel that turns along with the servo. Achieved through flex axle from a Znap set. - Front, Rear and Work lights - controlled by manual switch Pictures: From behind; max turning angle. forks in top position. Front view; forks in top position. Cabin interior; dashboard above the wheel, heater with 3 "buttons" below the wheel, speaker in silver to the left and right of the dashboard, and hydraulics control on the right. The seat can barely be seen in the lower middle of the pic. Detail shot from the rear; light on, with the seat dismantled (it was very hard to show it in any other shots) Panels, interior and battery box removed; large motor for lift visible in the lower middle, and gear train for lift and tilt visible. Video: (Please excuse the music, it was to boring without, and I've never used music in a video before...) Finally, my video is uploading. It will be available here ( ), and I will add the video when it's done.I've had some trouble with my camera, and with uploading and editing the video but it will be up soon. Link to the discussion topic
JamesJT Posted February 15, 2015 Posted February 15, 2015 38. Terrafugia Transition Street-legal Aircraft Ch1 - L Motor for drive Ch2 - M motor to adjust the pitch of the elevator Ch3 - M Motor to open the wings, turn on the prop (L Motor & Switch) and connect the steering servo to the rudders (all at the same time). Ch4 - Servo for steering front wheels (and rudders but only when the wings are extended) 1 by jamesjtillson, on Flickr 2 by jamesjtillson, on Flickr 3 by jamesjtillson, on Flickr 4 by jamesjtillson, on Flickr 5 by jamesjtillson, on Flickr http://www.eurobrick...howtopic=105633
braker23 Posted February 15, 2015 Posted February 15, 2015 (edited) 39. Ice Mole So, this is my TBM (Tunnel Boring Machine), built for the sole purpose of breaking into snow banks, for the joy of my kids. It uses 4 L motors and needs 2 IR receivers, so using an sBrick for it is the perfect choice, as under 30 cm of snow, IR will fail, Bluetooth will prevail ;) Specs: Part count: 1235 (more or less) Weight: 1.5 Kg (exactly) Dimensions: 36(L) x 18(l) x 16(h) cm Drills: 5 (only) Functions: L motor for left track L motor for right track L motor for main drill L motor for the 4 side drills Manual functions: Open-able 2-sided top Small door to see the internals Features Spring loaded track suspension Back-loaded weight for balance Pictures: Video just as a link, no clue how to embed it from Flickr. https://flic.kr/p/qfYDWX Link to TC6 thread (WIP) http://www.eurobrick...opic=105695&hl= Thanks for this awesome contest, good luck to you all! PS: Sorry for the photo/video quality, it's hard at night and I was really running out of time. If possible, I would make better ones and replace these, by the time of the voting :) Due to lack of snow, I had no possibility to test/film it outside, as I intended... Edited February 15, 2015 by braker23
jeanska79 Posted February 15, 2015 Posted February 15, 2015 40. Civil Titan Tank Bridge Layer Function: Track A&B: two XL motor Stabilizating turret: one L motor 1 big linear actuator Lowering/liftinr arm: one M motor 2 big linear actuator Other feature: Spring suspension 6 med shock abs Chain tensioner 2 big shock abs Operating stairs on both side Comand turret Openable motor hood Openable maintenance portel 6 V fake motor Cooling motor fan 2 big shock abs for help in the initial part of discharge Tread page (soon updating more photo...) Hope you enjoy it!
rm8 Posted February 15, 2015 Posted February 15, 2015 (edited) 41. TOYOTA Land Cruiser FJ45 with snow plow attachment Scale model of Toyota Long bed truck (FJ45) Features: • All time 4x4 transmission • 2-speed manual gearbox (high/low ratio) • Live axles suspension with 2 link + panhard rod at each • Openable doors with locks, bonnet, bed door • Convertible roof • Detailed saloon • Customs stickers • FJ45 custome Sbrick control profile was designed at designer.sbrick.com • John Deere color scheme Motorized functions: • Propulsion: XL-motor • Steering: Servo-motor • Winch/Plow elevation: M-motor • Snow plow tilt left/right: M-motor Powered by LiPo battery block thru Smart Brick final release unit (sbrick.com) + Additional plow PF LED-lights Plow is elevated by winch. This scheme is popular in cheap and simple snow plows. Tilt in such model usually manually customized or use hydraulics. I used lever-push mechanism to tilt left/right. Plow can be dropped easily and you can use winch as regular. more pictures http://www.bricksafe...m8/FJ45snowplow VIDEO discussion topic http://www.eurobrick...howtopic=105219 Edited February 16, 2015 by rm8
weavil Posted February 15, 2015 Posted February 15, 2015 42. Automated Loader An automated quarry loader. Functions... 1M -Drive 1M -Steer 1M -Raise/Lower 1M -Raise/Lower Bucket Equipment... 2 - Receivers 1 - Battery Box TOPIC of the Loader <--Click for info.
VKTechnic Posted February 16, 2015 Posted February 16, 2015 43. GV-106 Razorback Discussion Topic GV-106 Razorback by VKTechnic, on Flickr Motorized features: - Drive (1 M-Motor) - Steering (1 M-Motor) - Turret rotation (1 M-Motor) - Gun elevation (1 M-Motor) Unmotorized features: - Lights (with switch) - Small size (27x17x16 studs!) More pictures: GV-106 Razorback by VKTechnic, on Flickr GV-106 Razorback by VKTechnic, on Flickr Full album can be found here Video:
Recommended Posts