Takanuinuva

The 1x1 round tile on Batman's grapple gun. Is it trans clear or trans black?

I honestly do not like Nya's new Samurai X outfit. There is too much green in my opinion. I was originally going to get every Nya minifig variant. But I'll pass on this one. I might get the new head for the goggles print since its more show accurate than the one I use for my 2012 Samurai X fig.

Remember the original descriptions of episodes 14 through 26. They got the episode names correct but the descriptions were way off from what they actually turned out to be. The fake descriptions had the ninjas fighting pirates and searching for keys. These could be the same. Don't judge the episode descriptions till they're actually released.

I'll be honest and say I don't like his weapons one bit. I would have preferred they reused the blades from the Fire Chima Ultrabuilds. Those work way better for axes. I'll be switching his weapons for those out pronto. Also I don't really care for the shoulder spikes. They look ok from the front. But from any other angle they just look off. I came up with a better design that utilizes the unused torso balljoints and the wing/blade/tooth piece introduced in the Savage Planet line as Furno's wings/Raw Jaw's tusks.

If you mean the add on arms/wings for the fire vs ice speedorz. Then yes there in LDD there in the same tab as the Hero Factory armor parts.

This is the only Protector set I will be getting for certain. I'll be using him for pieces to modify Pohatu. On his own though he is a pretty good set.

With that design you did for Pohatu. You could swap out the torso beam for this in black http://www.bricklink...Pic.asp?P=90605 or use a glatorian neck to attach the head and a o0o piece to attach the chest armor. Then there wouldn't be any exposed ball joints

Nice now I have a better view at how Niksput is build. Wish we had pics of them from the back like we got with Burnard, Globert and Nurp Naut. It looks like Niksput has a balljointed jaw rather than one like Gobba or Kraw

Its surprising how the brain attack torso piece gives Gali's waist a feminine shape without making her look too skinny either. Also the mix of Silver and Gunmetal doesn't look bad either.

Why did they not give the Earth Protector Trans purple 1x1 round studs?! All the other protectors have trans 1x1 round studs.

The Grapple hook looks to be a new piece that slides and attaches to the standard spring missile. Rather than the whole thing being a new piece.

I have to know. Are there half pins used in Onua's Claws/Shoulders http://www.bricklink.com/catalogItem.asp?P=4274 Or are those lighsaber holes molded in?

Just some ideas I've been working on that I also plan to enter into a moc contest by drscorpionx First is Nex's Rescue Machine. It features a unique torso build and 4 arms each with a different function. A goop shooter, A prying claw, a water cannon and a hand like on Evo Xl Machine. Can be built in real life save for the Nex minifigure. Silver armor part would have the printing from Bulk's Drill Machine. Nex's machine is built for cleanup and rescuing of Antropolis citizens. http://www.brickshel...machine_001.png http://www.brickshel...machine_002.png http://www.brickshel...machine_003.png http://www.brickshel...machine_004.png Next up is Stringer's Speed Machine. Features wheeled feet, Spring shooters. Blades and Shield generators. The speakers are just so Stringer can listen to tunes. Can be built in real live save for the Stringer minifigure and the blue breakout shields Stringer's machine is built to take out jumpers fast and efficiently. In a pinch the blades can be converted into shield generators though Stringers machine is unable to move while shielding http://www.brickshel...machine_001.png http://www.brickshel...machine_002.png http://www.brickshel...machine_003.png http://www.brickshel...machine_004.png Lxf file for Nex and Stringers mechs http://www.brickshel...inger_mechs.lxf Last up is Rocka's Striker Machine. Features heavy armor. Pulse blasters and missiles. Can be fully built in real life. This mech is made to take and deliver heavy fire power. The back canister stores energy for the Pulse blasters. It is shielded to protect the weaker backside of the mech. http://www.brickshel...machine_001.png http://www.brickshel...machine_002.png http://www.brickshel...machine_003.png http://www.brickshel...machine_004.png Lxf file (also has a work in progress Beast I'm making) http://www.brickshel...aster_beast.lxf

I was more referring that 1x1 bricks won't attach to certain parts with technic pin holes. Like this part http://www.bricklink.com/catalogItem.asp?P=4185 or the Beast foot http://www.bricklink.com/catalogItem.asp?P=15367. Specifically the 1x1 round studs

I thought I should point it out. Any brick with a 1x1 stud should be able to attach to any technic pin hole. Specifically the 1x1 round plates

To me the gold armor on Tahu, Kopaka and Onua stands out to much. I'll be changing it to silver once I get all 6 of the Toa. I'll have to keep Tahu and Kopaka's gold chests since they have there printing on them. Maybe when more sets are released we'll get white and red printed chests with ice and fire designs respectively

Something like this? http://www.brickshelf.com/gallery/takanuinuva/mc/hf_minifig_megatron_1.png http://www.brickshelf.com/gallery/takanuinuva/mc/hf_minifig_megatron_2.png

Since the gallery became public. I found a work around for posting the pics. The new links should work properly.

The picture link I post changes one letter to lowercase. The link should look like this (With the added http in front) brickshelf.com/gallery/takanuinuva/Skeletondragon/baron_von_brickstein_ldd_001.jpg But instead it changes to this (The d in Skeletondragon gets changed to lower case) When I go to fix it. The letter goes back to uppercase. brickshelf.com/gallery/takanuinuva/Skeletondragon/baron_von_brickstein_ldd_001.jpg

Any ideas how to fix it. I go to edit the links but the D is already uppercase

I think there's a bug with this site and Brickshelf. I posted pics of a creation of mine to here and Bzpower. The pic links work fine on Bzpower but don't work here.

I don't know. They work on Bzpower. Is there a bug where brickshelf pics don't load on Eurobricks currently?For now check the Bzpower topic for the pic links http://www.bzpower.com/board/topic/15386-skeleton-dragon-hopefully-final-version/#entry765298

With the recent LDD update adding in the Fire Vs Ice Chima parts I was able to update my model of my Skeleton Dragon. Gallery when public (In the gallery is also an armor stand and seat for my minfigure. Also the .lxf file) http://www.brickshel...ry.cgi?f=548886 First My Custom Sigfig Baron Von Brickstein. (I have LDD and IRL pics of him) Just a quick bio of him. He was originally my character in Lego Universe. When it was closing down. He took a fragment of the Imagination Nexus and built a portal out of the game into the Lego World. He then used the fragment to make another Imagination Nexus and built a Skeleton Castle atop a mountain. He then took control of the Ninjago Skeleton Army and the Fantasy Castle Skeleton Army and made them soldiers of good. He wields a battle axe and a armor harness that can sprout dragon wings for flight. His axe and armor harness have slots to plug imagination in them to power them up (Represented by 1x1 trans clear round tiles. Might be changed to the Arkenstone printed ones in the LOTR set The Lonely Mountain) LDD Pics (Have what IRL Colors would be but no printing since it isn't available in LDD) http://www.brickshel...y.cgi?i=6170230 http://www.brickshel...y.cgi?i=6170231 http://www.brickshel...y.cgi?i=6170232 http://www.brickshel...y.cgi?i=6170233 IRL Pics (Using the same pieces in existing colors. Shows the printing. I might be changing the axe to use the new parts on Antimater's staff) http://www.brickshel...y.cgi?i=6170234 http://www.brickshel...y.cgi?i=6170235 http://www.brickshel...y.cgi?i=6170236 http://www.brickshel...y.cgi?i=6170237 Here are pictures of the Skeleton Dragon LDD Pics (Have what IRL Colors would be but no printing since it isn't available in LDD) http://www.brickshel...y.cgi?i=6170238 http://www.brickshel...y.cgi?i=6170239 http://www.brickshel...y.cgi?i=6170240 http://www.brickshel...y.cgi?i=6170241 http://www.brickshel...y.cgi?i=6170242 http://www.brickshel...y.cgi?i=6170243 IRL Pics (Using the same pieces in existing colors. Head has eyes colored black with sharpie) http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6172544 (Scale between the dragon and my sigfig) http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6172546 http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6172547 http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6172548 http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6172549 http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6172550 Comments and criticism appreciated

Fan work. Someone drew it on deviantart. Here is a link to one of them http://ferain.deviantart.com/art/Gali-2015-Animation-Wallpaper-488201515

Good to see there still the same prices. I just wish we could get finalized pictures. I want to see how Niksput is built. I got Globert's build down for certain.