TheWineNut

Not to mention Lursa and B'Etor! ... and also Morn.

The oval looks pretty close to the TV Enterprise-D. It is properly ‘oval’!

I have the large scale plastic model kit of the Enterprise D which is 46 cm long. Assuming Lego maintains the size ratio the Lego kit will have the following dimensions: Length 60 cm Height 21 cm Saucer Width 44 cm Saucer Length 36.5 cm Saucer Height at thickest 5 cm; at edge, about a Lego plate Nacelles length 23.5 cm

What is the estimate for the width of the main build? Around 48 studs perhaps? Have to work out how much shelf space to reserve! A great set.

I have the set in hand. It was delivered in error to me in Australia instead of the Rivendell set. I'm returning it to Lego as I value the Rivendell set more; although while it was here I took a few photos to record the event.

Thanks, the Assembly Square mod is described below.

Thanks, I really like the Art Deco features on the facade which provide extra interest to the build Thanks, having the extra space on the interiors provided extra interest.

Thanks, I've had a few Light My Bricks kits, and for me the Treehouse and this Jazz Club kit are fantastic kits and really suit the kits they are based on. Thanks, as mentioned the space I have to work with is awkward, however I'm really pleased with the results. Thanks, I appreciate the comment.

Hi All, My study has shelving built into the walls which are 47 studs wide. This poses a bit of a challenge, as Lego suits more to even numbers with the standard baseplates being 32 and 48 studs wide. I want the Jazz Club to fit to the shelves so bought a second kit, along with mini builds from the Moving Truck GWP, and the Light My Bricks lighting kit. I built the Jazz Club per instructions to get the hang of it and then rebuilt it to a cut down 47x32 baseplate. The Jazz Club has gone from 20 to 30 studs wide, and the Pizzeria has gone from 12 to 17 studs wide. The stud saving from 18 to 17 on the Pizzeria was done by having the column to the left of the door to be 1 column wide rather than 2, it's hardly noticeable. I also changed the outside lights on the Pizzeria as the kit light was too wide for the narrower gap between the awnings. The extra floor space allowed other interior changes; the stage is bigger allowing a 5 piece band including the piano from the Moving Van, the Pizzeria has a table and a jukebox, the Tailor has extra bench space, the balcony in the Manager's office is larger, and the dressing room has an extra couch and more room for the performers to warm up before their gigs. The Light My Bricks kit was typically fiddly, but it suits this set really well, with the flashing lights at the entry and the stained glass windows. The last photo shows the other Modulars I have, with Assembly Square also reconfigured to be 47 studs wide. It was a great project to do.

From measuring based on stud count based on the 6x6 round plate below the body it is around 56 cm / 22 inches high and 72cm / 28 inches long.

The inclusion of two colours for the body is great, you've got two iconic colours, plus you can include some white bricks and reproduce Eddie's Frankenstrat!

We have built-in bookshelves at home which, due to a design quirk, are 47 studs wide. A previous project was to retrofit the 48-wide Assembly Square to 47 studs, and this time after building the Bookshop I had a 15-stud wide gap. To fill it in I turn the Central Perk model into a 15-stud wide Modular as you see here. The MOC was done combining two of the Central Perk sets augmented with what I had around and a trip to a PAB wall. I wanted to keep the style of Central Perk as much as possible so re-used Gunther's Coffee station, the Couch and carpet, and rug and Phoebe's stage. I also added a Lego Art wall on the middle story. It was a bit of a challenge given that Lego is not favoured to odd numbered sizes for builds. For the top floor I had a balcony along with the Music Room. There's no stairs at present, but the gang can climb up the scaffolding until I get some stairs, probably similar to those on the outside of Assembly Square, installed. I'll be putting a lighting kit in as I have with the other modulars. I'm happy with the result thus far, but may refine it in time, perhaps to make the exterior of the middle level a bit more interesting.

Lego Space coin or Ulysses wasn’t available in VIP store when I ordered Discovery this morning (in Australia). Can see space coin now but no Ulysses. Shuttle still available to order at present. By comparison the Porsche and Bonsai were sold out by now on their launches.

Any idea the dimensions of the model when closed? The official description only gives measurements 'when open'.

There may be a solution. There is a review on the Lego Shop by ty28 that includes the following suggestion: Remove the tan piece in front of the holder with the beam and replace with a 2 by 2 plate. The piece holding the grey beam should be moved forward by one 1 by 2 plate. Next, remove the rubber piece in the front. Then add 2, 1 by 2 plates and one 1 by 2 tile stacked and place in front of the holder that used to hold the rubber piece. This way the orange piece should align at 90 degrees, He/She includes a photo of the mechanism with the post. https://www.lego.com/en-au/product/grand-piano-21323 Go to the User Review dated August 16 (or 17 for me in Australia) I haven't tried this but plan to check it out. Thanks to ty28 for posting it there.

I thought about glazing the whole thing, but decided on a simpler design; particularly after paying for that glass. I don't find dust on the MF to be a big problem here; although dust does collect on the top of the glass, and on the first 5cm or so of the base, so cleaning is OK. I do have a surround made of perspex that can be installed; but that's mainly done when little kids are in the house; I have other lego they can play with.

Thanks, that's truly impressive.

They're all inside their various rooms, even the baby, remember it's still winter in this part of the world! Here's the dancer getting some practice in. Thanks for the other kind comments as well.

Thanks for the response, I'll explain my thinking with the photos. In this photo with the keyboard taken out of the piano* the keys are basically even, with slight variations as you note. Here's the interior showing the mechanism. You can see that the orange piece is not fully vertical, and therefore the red, white and black key strikers are at an angle rather than at 9 12 and 3 o'clock positions. When you put the keyboard back in the key alignment is not as even, due to the hammer mechanism going under the red pieces. Particularly note the A (6th white from the left), and G (4th white from the right) keys. I could see the keys moving down as I reinstalled the keyboard. Therefore my thinking that I can get the orange bar to be vertical at the rest position, possibly by extending the grey technic bar, the red strikers will be horizontal rather than angled down and hopefully then the keys will be even. * That you can remove the keyboard, just like in a real piano, is yet another piece of masterful design by Donny Chen in this brilliant set.

Let me guess, the play is Romeo and Juliet?

Very impressive, congratulations. I also appreciate the details included; such as the Dressing Rooms behind the stage; and the piano in the foyer. Very clever design with the roof linings and dome. How many pieces do you estimate are in the model?

It was a very short discussion.

Here is my mod of the fantastic Assembly Square Modular Building: Doesn't look like a mod does it? The mod is that it is one stud narrower than the official model! I had bought the model to go into built-in shelves in our study, but miscalculated on the measurements. It turn out that the 48-stud wide Assembly Square wouldn't fit into the 47-stud wide space I had in the shelves. I had the option to adjust the shelves or adjust the model so went for, actually told to go for, the latter option. I built the full model first to understand the design; then bought a 48x48 baseplate; cut it to 47x32, and broke down the model to transfer the pieces to new sized base. On first thought it seemed easy; given the walkway space between the two buildings, but it was trickier than expected. In order to make the forecourt work I had to move the Fountain and coloured tiles forward by one stud and then reconfigure the angled corner pieces. Other changes were at the mainly adjusting around this; I had to lose the cage piece that holds the greenery up between the buildings; but this isn't noticeable as the greenery happily sits on the arches between the buildings. All up I'm happy with the results and have installed a lighting kit as well.

Thank you for the fantastic review. I've been waiting for this since it was approved on Lego Ideas, and managed to get one ordered early on launch morning. I'm very impressed with how precisely this kit mimics the actual action of a real piano. I'm thoroughly enjoying the build and have just installed the keyboard and hammers into the piano. I see that in the 'rest' position the keys are slightly out of aligned. You show this in your bag 14 pic above. I think this is due to the angle the grey 4-hole technic 'stopper bar' on the far left sits in relation to the orange piece at the left end of the long technic bar. I'm wondering whether to add a pad to the stopper bar to ensure the orange piece stops at true vertical which should allow all the key to be even at the rest position. Any thoughts?

New Poster, long time reader, thanks to all for the great forums. After I finished building my UCS MF I too was struggling to figure out how to display it, so I put my novice woodworking skills to use and made my own display/coffee table: It was a good project to make, although quite expensive as the glass top had to be 1cm thick toughened glass to meet safety requirements. The wood is Australian hardwood with a walnut stain. I made it slightly oversized to be able to fit a couple of other models as seen in the pictures.