msk6003

WIP post 2 All function is finished. Now need last turning and building wing. Light blue panel on front nose because my all my black panel is used in other. Yellow lever on this side wing is control flap.(Same side with original) And black knob on this side is control C+ L motor connected with extension cable. Lever on this side of wing is control landing gear.(Same side with original) And black knob on this side is control small motor. Need to get 4x 3x7 panel for flap. Both front and rear landing gear use exactly same link system with origianl model and it's enough support whole model with 3. And I use axle-holed wheel for landing gear. Not pinhole variant because I also planned to make second model too. Bottom side I use 2 worm gear in satellite. When I building prototype with 1 worm gear, gear's backlash make one of panel can't folding fully. Original model fixed this using toothed bush and connector but cause I can't use that in here, I use 2 worm gear insted. Now it works fine.

Same with original. Manuel with lever on wing.

Like I wrote in second my post, I use small motor from spike essential for satellite. There was one thing I wasn't expecting, but it was resolved quickly.

But lot of set use linear clutch where can fit 24t clutch. like 42112 mixer truck. It has 24t gear in drum's drivetrain but insted using 24t clutch, it use linear clutch. And if it doesn't come in a year or two, I'll probably do it, but it's already been almost 5 years and I doubt it's discontinued. Anyway, back to topic, I finished almost function. Including landing gear and flap. Still need to support front landing gear but I will upload picture soon.

And I will use other moter like PF M,L, C+ M,L. Those 4.5v motor is to weak for that gear wall.

According to rebrickable, It don't released after 2018 with 62.4x20 tire.

Also I wanted to model fit in modern technic sets but If I use that it can't count modern set. For the same reason, I tried not to use the clutch gear at first. Because it is discontinued after 2018. but the linear clutch has too strong clutch power, so I had no choice but to use the clutch gear.

Very similer but no. I planned studless 8480 space shuttle. In video I used light brick insted original's fiber optic system and spike essential's small motor for satellite. PF don't have small enough motor for satellite so I wrote PF can't do this. I also planned to make B model submarine after finish A model but I don't know it will possible. Yes

New moc working test I don't have enough red light brick so used with yellow. Not only that, main gearbox is finished some days ago and need to make connect all thing and put outside and some miner function. Model is secret now. But if you are experienced enough to lego you will know which model is this. I planned this in 2021.12 (Inspired in this forum) but started in some weeks ago. And in video I used PF motor but complete model will use C+. Actually, PF can't work with this model. C+ also don't work in this time due to lack of extension cable but I will use chinese C+ extension cable. I will upload more progress here later. Edit 1. 2 people correct guessing model so change title

If you running RI/Spike hub in live mode it's processing speed is different depending on your PC's processing speed. If your PC is slow, than code's processing speed become slow.

Considering matel has both hot wheels and megablocks this will impossible but I want see 'Bone Shaker' monster truck.

But any other brick company and custom parts builder(even efferman!) don't make it before TLG did. I think TLG deserves praise.

I don't know this was asked before but is someone tried use spike essential's small motor as steering servo with buwizz 3.0? I tried it today after get my 3.0 but it seems not work right.

If we get new gear which has bigger hole for fit on axle connector parts than problem will solved.

In my eyes that part looks more useful than TLG's version if we can put 3mm bar in that hole. If it can, than we can use that part for not only clutch but also other simple 3L sliding things like gun's recoil.

F this. RI is MUCH better than spike. RI has both virtual and real controller support, all PU/C+ element support and hub-to-hub communication but now it has machine learning support while spike DON'T HAVE NOTHING BUT 3x3 LIGHT METRIX.

I tried to find it. 42055 BWE, 42054 Class, 42049 Mine loader, 42043 Benz arocs, 42042 Crawler crane, 42094 Tracked loader use bevel.

sigh I wanted to keep it a secret, but I'll be more specific. I plan to use splat gears. Theoretically, with these gears, you can create a fully functional GBC module with only a pure system brick, except for the motor and one axle and even if I use 71427 or 43362 I can remove that axle.

Of course it work as like other GBC module. Only it will make using only system brick(more precisely, parts that do not have technic in their names, except for some parts). I planned use 1 motor and 1 axle. And every other parts will don't have 'technic' in there name acroding to stud.io.

Can I use only system brick for build fully working module if it is possible?

If there is a problem with the lack of designers, can't we accept applications after the release of the set or do something like a contest to officially include AFOL's B models?

Found in facebook page and someone said new 60t in 42144 is not bevel anymore. I can't check now so is someone can check it?

Even this is also one of tracked vehicle but I still want see Extreme firefighting vehicle in offical set.

https://rebrickable.com/mocs/MOC-27091/ctan666/ambulance-pull-back/#details How about pull back ambulance?

Considering daytona's new strong and fast differential some kind of trophy truck /short course truck will possible.