Cypr-21

Only the minimog own the new triangle parts. I made the video of the quad bike : And some photos of the small models :

I bought it in MaxyToys in France. I also bought 9390, 9391 and 9392, tow pick up 9395 wasn't avaible. I also make a video of the crane 9391 which show how the new turntable is working. And I took two pictures with new parts : From 9390 From 9391

Hi guys ! You need informations about 1H2012 models ? Check that !

Happy to see my spreader =) Does it run without problems ?

Yes, I changed about 10-15 parts from the 8366, but all other are the same. RC motors come from the 8475, but they are the same on the 8366. And yes, axles are the normal black technic axles. I know what you will do now

I agree. But it seems to be ... too much, no ? The idea is good, but I think the Unimog isn't the good vehicle to make that.

Hi again. It's not a MOC, but a modification of the famous supersonic RC 8366. I post it here just to say that RC kit is my collection :) And an amazing video (stay quiet, the cat is fine right now :D)

Very useless modification... Where is Unimog spirit ?

Thanks for comment. I'll make photo building instructions later, I think next week. To build this MOC, I knew precisely what I wanted to make. My specifications was composed of: Use a motor M for mechanical functions (outriggers and arm) Use a pneumatic system for the towing fork After reflection, I thought that using the same 8258's kind of "gearbox" was a good idea, not to have problems in mechanics. I prefer create from things reliable and make small innovations rather than make some "never seen" which doesn't work. Other functions were easy to implement (steering and transmission). The most difficult part was the make design, you can compare in the videos.

Hi, I recently made this yellow tow truck, different of official Lego model (#8285), whitch features steering on front axle, fake V8 engine with two rear axles, M motor to work outrigers, lifting and telescoping arm, and pneumatic track to use the tow fork. I spent about 15 hours to made two releases for design. This is the review. The design is that of an American truck, yellow as can be found on the highway (In France). A long bonnet hides a V8, with a good square front grille, lights, turn signals and size indicators. On the cabin, there are details: lights with LEDs, horns, flashing lights, mirrors, and inside, the cabin has a dashboard, steering wheel and two seats (blue). Behind the cab there are two exhausts, a pump, and a fake pump. The length of the truck was the most difficult to manage. With only 3 axles, it should not be a very long truck. Under the cab and on each side, there are tanks (with curved panels 3x11) that give a good shape, and footboard. Advancing on the back and along the chassis, there is before the rear axles panels that hide access to the controls, also made ​​with 3x11 boards. At the rear, the two tools are distinct from truck by color is red and the crane towing fork is gray. This allows to separate the moving parts of the truck, but the outriggers would also needed a specific color. In conclusion, the design which required the largest part of working time has finally succeeded. Some things can be discussed, but I think I improved a maximum. Steering is very classic and very effective. From the HOG an axis dives along the cabin, and after an angle made ​​by two knobs a 12t slides a rack. The turning radius is approximately 40cm. The V8 engine is driven by two rear axles, an axis follow the chassis, then up 4 studs (with a loose wheel to cross-axis direction), before driving the crankshaft. A M motor drives a 3-speed gearbox, with a first 12/20 reduction. With it I can run telescopic arm, lifting arm and outriggers. It looks like #8258 gearbox. The winch is manual, and held by two 16t which one of a friction pin. Finally, the pneumatic system to deploy the fork towing (almost to the ground) by a cylinder and a mini cylinder. I made two videos : one for the first design version and one for the second design version. I hope you'll like it :)

IMO, add an air-tank on Unimog #8110 is a very useless modification. Compressor provides a constant pressure so pneumatic system doesn't need air tank.

Hi ! Thanks for comments :) I made Building Instructions, avaible here You can watch it on google documents, but not in HQ. To get HQ Building Instructions, you have to download it.

Hi, I begin this topic to present you all my creations. I made today a garbage truck designed for the eleventh SeTechnic contest. It's a small truck, near Lego City scale. There is four functions : - steering, like mini mobile crane #8067 - loading system for garbage - two systems to compress waste It's a very small truck, but I'm happy because it works very good :) And the video to show how it works : I hope you'll like it :)

Very good idea using City cylinders

Yes, I'll made BI for this. Photo BI and LDD file. Before I'll made ejection nozzle. Be patient, I'm student, I don't build during lessons =)

While I haven't found a solution, I let my blower like it.

Inspired by tripletschiee one, I designed my own snow blower. It uses front PPTO to go up or down, and front PTO to run the blower. If you want, I can make photos buiding instructions during the week

Just a very funny joke with a friend =) We started by changing the wheels, and when we saw the result with the wheels of the supercar 8070, work continued in order to ridicule those who make horrible tuning on their cars. That's why we decided to call it "troll tuning" Anyway, Unimog is now in normal state ^^

What about a troll tuning version of Unimog ?

Thank you for modeled, it renders a service to those wishing a parts list. I do not think there are any illegal builds to set front and rear panels. Parts come from these 3 set: Hauler 8264, Hero-Factory Dropship 7160, and Mini excavator 8047. edit : I edited the file to correct, now the spreader is complete. Anyways, it needs 52 elements of small caterpillars, I haven't found in LDD. LDD file

No, but if you have a google account, try to be logged in and download it. I tried to download it by being disconected from my google account and it works.

It's hosted on Google Documents, there is a button to download the file (on top right).

I don't think 'Tracked Crane' will be a big model. If you look at its number, it seems to be a small set with arround 200-250 parts. So no 10219 scale.

Hi ! Here is Spreader Notice, in HD photography pdf. Clic here to download it. I hope you'll like it.

Hi, here is my complete plowing version of Unimog :