Jump to content

Pego

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    99

  • Joined

  • Last visited

 Content Type 

Everything posted by Pego

  1. Pego
    I don't like it either, but I couldn't make it any shorter because of the u-joints
  2. Pego
    Thank you! And the wheelbase should actually be like this, almost all live axle 8x8 trucks have it set up like this
  3. Pego
    After building the Gaz 66 truck, I went for a slightly longer truck, an 8x8. I tried to replicate the Finnish military truck Sisu E11T just because the wheelbase is long enough, the bodywork is definitely not very accurate though. The length of the u-joints would make it very hard to make it shorter with this design. Axles 1 and 2 are pretty much the same as the front axle of the Gaz, but this one uses 4 19L flex axles for leaf springs, because 8 shorter flex axles would not fit. Features 8wd with 1 L motor 4 wheel steering with an M motor 4 leaf sprung live axles Video: Suspension test: LDD file: https://drive.google.com/file/d/0B3uQRNR6UbBWeU5tc0lDU2ZGQTQ/view?usp=sharing
  4. Pego
    Hello! I have built yet another mini trial truck, this time I tried to replicate the Russian Gaz 66 off road truck: To use the model team tires I had to make it very compact, and as a result I had to use a chain to transfer power to the driveshaft, which I do not like. I used leaf springs (flex axles) in my live axles, which both makes it very compact and gives it tons of suspension flex. 4x4 - M motor Steering - M motor Leaf spring live axles Video:
  5. Pego
    Yes, it might seem fast building,but the chassis is very similar to my other, slightly bigger truck, so I used very similar technicues. Thnx for building it and telling me what you think! I may also try to make it with a servo, but the gears are problematic, maybe the Sbrick can solve it somehow.
  6. Pego
    I know it is much lighter than other trucks right now, but I'll try to build the body so light that the motor can handle it
  7. Pego
    Hi! This is a new chassis I have built, it features: 8 wheel drive by an XL motor 4 wheel steering by an M motor 4 live axles I willl put a winch on it still (any other ideas?). The performance of this thing impressed me a little, because I have only seen 8x8s with 2 XLs or more, so I wasn't sure if it would have enough power. The body will be of the russian Kamaz 6450 truck. I will make an LDD file of this too.
  8. Pego
    Hi! I have abandoned this particular chassis because of the following problems: 1. power/torque 2. suspension flex in the rear axles 3. weak steering So I have started building a new chassis solving these problems. I haven´t decided if I should use an XL or 2 L motors yet though. Linked rear live axles Rack and pinion steering
  9. Pego
    Hi! Since I started to play Spintires I have wanted to build the Ural 4320 truck. I just added an extra axle to my mini rock crawler (http://www.eurobricks.com/forum/index.php?showtopic=107051&hl=), to make it fit the proportions almost perfectly. I haven't started building the body yet, which I may need some help with
  10. Pego
    Here is the LDD file: https://drive.google.com/file/d/0B3uQRNR6UbBWdjlDS29LMDByd28/view?usp=sharing
  11. Pego
    LDD file: https://drive.google.com/file/d/0B3uQRNR6UbBWSFJYanMyMWZXc2c/view?usp=sharing
  12. Pego
    Alright, I will do that this afternoon
  13. Pego
    I think an sbrick could fit in there, but I cant't use it right now. The L motors wire is too short for it to go behind it
  14. Pego
    Hello! I wanted to build something small and powerfull, and most importantly, without the micromotor. So I built this thing in about 2h, and you can probably see that in the bodywork (I don´t have more red connectors). 2 Link live axles L motor for drive geared 0.36 M motor for steering geared 0.2 Video: If you want I can upload an LDD file, but someone has to tell me how to do that. Maximum articulation The springs keep the axles straight The IR receiver doesn´t fit inside the bodywork
  15. Pego
    Hello! This is an idea that I haven´t seen before, and wanted to share. It is the 81.6 x 38 balloon tires stretched on the unimog rim. They are 10 studs in diameter and 5 studs wide. The tires will stretch and become unusable on the normal rim after some time!
  16. Pego
    The snow has finally melted here now, so I made a simple stand for my phone and took a better video (I think) than the last one. I also shortened the body by a stud in the front to improve the looks of it. I have an LDD file, but can I put the file straight into here?
  17. Pego
    The snow has melted here now and I made a simple stand for my phone and took a better video than the last one (I think). I also shortened the body by one stud in the front, to make it look better
  18. Pego
    So, here's the video of it: Sadly, I had to use the IR system to be able to film it.
  19. Pego
    Soon
  20. Pego
    Thanks! Yes, there is a bit, but it is still perfectly drive-able
  21. Pego
    -4x4 -Live axles with panhard rods -M motor for steering -L motor for drive (geared 1/5) I wanted to build a truck, that would be as light as possible, but a full pickup body would have weighed it down (I have tried it). So I built half of a pickup without doors, which works very well. I originally wanted to use the smaller tires, but now in winter it performs much better in the snow with the balloon tires. What do you think that looks better? Inspiration:
  22. Pego
    An L or M motor could probably be used, but getting it compact would be very hard. I haven't figured out how to change the rotation on the android app either, otherwise it's great.
  23. Pego
    The gears themselves dont slip, but the micromotor pulley slips a lot There's no way you can fit a differential in there...
  24. Pego
    A small 4x4 chassis with live axles. L motor for drive (geared 12:20) and micromotor for steering. I haven´t been able to make an ok body design, so that is why there isn´t one
×
×
  • Create New...